FCS300 WHERE PRECISION DRIVES

WHERE
PRECISION
DRIVES
http://www.ipsystemsusa.com/Default.aspx
PRODUCTION
FCS300
STAINLESS STEEL SPRAY VALVE
VALVE SPECIFICATIONS
Dimensions
168.4 mm x 22 mm x 22 mm
(6.63 in x 0.866 in x 0.866 in)
The FCS300 spray valve provides a repeatable, concentrated coating
film in pattern widths ranging from 0.25” to over 2”. The atomized
spray process resulting from the FCS300 will produce conical (round
cap) or fan-shaped (flat cap) patterns with transfer efficiencies in
excess of 99%. The FCS300 features a micrometer flow adjustment
that makes fine tuning of your process easier than ever.
The FCS300 has many integrated features including:
Weight
9 oz
Viscosity Range
1 cps – Paste
Operating Air Pressure
60 – 100 psi
Maximum Inlet Fluid Pressure
2500 psi
Wetted Components
®
®
Stainless steel, Teflon , Kalrez
Transfer Efficiency
99%
Spray Pattern Width (Round Cap)
0.25 in – 1 in
Spray Pattern Width (Flat Cap)
0.75 in – 2 in+
One Mustang Drive
Cohoes NY 12047
tel 518 371 2684
fx 518 371 2688
www.pva.net
Low pressure, low volume atomized process
300 series stainless steel fluid body for superior material
compatibility
Interchangeable spray cap offers fan and oval-shaped
patterns
Micrometer flow adjustment with lock nut
Divorced valve design prevents contamination of the air
section
Compatible with all commercially available conformal
coatings
Wide viscosity range offers versatility for virtually any spray
application
The FCS300 is available on all new PVA2000™, PVA650™, and
PVA350™ selective coating systems, can be retrofitted to any existing
PVA system, or can be acquired for any manual spray application.
For more information, please contact PVA at info@pva.net or
1-518-371-2684.
PVA also offers the following products to improve your dispensing
application:
FCS300-ES
Stainless steel extended spray valve
FC100-MC
Stainless steel front closing dispensing valve
FCS3-SP
FCS300 spare parts kit
V317
Flat spray cap
V318
Round spray cap
Teflon® and Kalrez® are registered trademarks of Dupont.
July 2010
FCS300 Mounting Dimensions
43.2 mm
1.73"
(3x) #10-32 Thread
Air to Close
Air to Open
167.6 mm
6.6"
101.3 mm
3.99"
(2x) O 4.19 mm (0.165")
CLR Hole Thru
22 mm (0.866")
Square
24.6 mm
0.97"
22.5 mm
0.885"
www.pva.net
12.7 mm
0.50"
Atomizing Air