Types of Wheels

Transcription

Types of Wheels

CHOOSING A POTTER'S WHEEL
Types of Wheels
There are two basic categories of potter's wheels:
1. Electric "sit down" wheels which are variable speed wheels about 20"
high.
2. Kickwheels which are usually foot powered but can be motorized.
These are massive wheels weighing 200 - 300 pounds turned by the
momentum of a heavy 'flywheel'.
Electric Wheels
These are the most popular types of wheels because of their ease of
operation. With a slight touch of your foot, the wheelhead can turn from
0 to 250 RPM allowing the potter to concentrate on the piece rather
than the mechanics of the wheel.
In this category there are three basic methods of driving the wheelhead:
(1) Belt/pulley, (2) Gear box/direct drive, and (3) Cone/pulley. There are
also three basic methods of varying the speed of the wheelhead: (1)
Electronically with an SCR controller and DC motor, (2) Electrically with
a power transformer and DC motor, and (3) Mechanically with a cone
moving along a pulley with an AC motor.
Drive Systems
W
H
E
E
L
S
1. The belt/pulley uses a small pulley (approx. 11/2") on the motor shaft
connected to a large pulley (approx. 12") connected to the wheelhead
by means of a belt. Though capable of slipping, with the proper tension
they work well and are the most popular method of driving wheelheads.
Used by Brent, Soldner and Creative Industries.
2. The gear box/direct drive uses a gear box (like a small car
transmission—a series of various size gears) in direct contact with the
shaft of the wheelhead. This provides for no slippage but some power
is lost in the transmission and a little more care is required to check the
fluid level periodically.
3. The cone/pulley has a stainless steel cone mounted on the end of
an AC motor turning at one constant speed (for maximum torque). The
cone moves along a hard rubber pulley and the friction and varying
diameters of the cone provide the drive and the variable speed. Used
by Shimpo on the RK 10 models.
Variable Speed
The way in which a wheelhead achieves its variable speed (generally 0
to 250 RPM) from a motor that normally turns around 1800 RPM is the
major issue wheel manufacturers face when deciding to make wheels.
There are three basic ways.
1. Electronically with an SCR controller and a DC motor with the
necessary current adjusters. This provides moderately good torque at
all speeds but is weak at low speeds, especially when weighed down
with a maximum load of clay. This type is sometimes known to jerk at
low speeds with a maximum clay load. A noticeable hum is usually
present. A short stroke footpedal that moves about 2" or so is typical,
and this is a minor drawback—it is difficult to find a spot between
medium and fast without fine tuning with a micrometer. However,
overall, they are pretty reliable and trouble free.
2. Electrically with a magnetic transformer and a DC motor. This
eliminates many of the objectionable features of the SCR controller
such as hum, low speed jerking, and the short stroke footpedal.
Although the foot pedal is somewhat cumbersome, the four inch stroke
of the footpedal is extremely smooth.
3. Mechanically with a stainless steel cone mounted on the shaft of an
AC motor turning at constant speed for maximum torque. The footpedal
is connected to the base of the motor and, as the footpedal is moved,
the entire motor moves along rails engaging the cone against a hard
rubber pulley under the wheel head. This wheel usually starts in the 20
RPM range due to the mechanics of engaging the cone against the
pulley. The footpedal must be mounted to side of the wheel (to move
the motor) and more pressure must be exerted to push the motor into
contact with the pulley. A hand lever is usually provided for ease and
59
more control. The hand lever also helps if you're standing on a table
throwing five foot pots and trying to push the pedal. Some slippage is
possible as on a belt system, but the main feature is in the strength of
the torque provided by a constantly turning one speed motor.
Kickwheels
A kickwheel is a necessarily large wheel driven by the momentum of
the flywheel under the wheelhead. The flywheel is usually kicked,
hence, the name kickwheel. While most kickwheels are powered by
foot there has been a growing trend lately toward motorization mainly
to aid in the centering cycle.
The normal weight of a flywheel is about 100 pounds but can be as
high as 200 pounds. However, weight is only one consideration in
choosing a kickwheel. A rim weighted flywheel provides more
momentum that a core weighted flywheel of considerably greater
weight. On the other hand, if you have very short legs, a wide diameter
flywheel heavily rim weighted may be harder for you to kick than a
narrower diameter flywheel.
Motorized Kickwheels
There are two ways of motorizing a kickwheel that seem practical
today:
1. Flywheel driven uses a 1 speed motor (1/4 H.P. is more than
sufficient) with a small (3") hard rubber 'puck' mounted on the motor
shaft. The motor is hinged with a spring action so that as you pull the
motor against the flywheel (either on the top rim or outside edge of the
flywheel) the rubber puck turns the flywheel. This requires that the top
or rim of the flywheel be steel or steel-covered cement or the puck will
wear out or flatten out and not turn smoothly. This is probably the most
common way kickwheels are motorized.
Some motors are connected to microswitches which only go on when
you engage the motor and others have a switch near the work space,
meaning you either have to keep switching the motor on and off or
leave it running all the time.
2. Shaft driven requires a large rubber puck or small tire. This small tire
(about 8-10") is mounted on the shaft about halfway between the
wheelhead and the flywheel. The motor shaft rubs against the tire,
which then turns the flywheel. This method eliminates the problem of
uneven wear and slight bumpiness characteristic of flywheel driven
kickwheels not properly balanced or machined. These wheels usually
have a foot lever, not an on/off switch.
All About Motors
Horsepower ratings, like the wattage rating for amplifiers, are
somewhat misleading. Motor manufacturers rate motors according to
their standards, but wheel manufacturers rate their motors in terms of
the power produced at the wheelhead. This is valid from a mechanical
point of view because it takes into account the effect that the reduction
in the speed of the motor has on the work it will do.
For example, a 1/2 H.P. motor usually turns at 1750 RPM at the shaft
but when connected to a large pulley, say 12", the speed at the
wheelhead is reduced to 250 RPM. That reduction in speed also
represents an increase in power or torque similar to a lever. So a
properly reduced 1/2 H.P. motor is really doing the work of a 1 H.P.
motor not reduced in speed. Therefore the horsepower rating is only
one criteria when choosing a wheel. How much clay a wheel will center
without undue strain or slowing down is the more important
consideration.
All of the motors used by wheel manufacturers are virtually
maintenance free and are under warranty by the motor manufacturers
as well as the wheel manufacturers. Under normal conditions, the only
thing that may need changing are motor brushes (small pieces of
carbon which make contact with the rotor).
Changing brushes is relatively simple and only need to be replaced
every 5000 hours of use which comes out to 4 hours per day, 5 days
per week, for 5 years.
Think it, Create it! A.R.T. Studio Clay Company 35 years of ceramic excellence
A.R.T. STUDIO CLAY COMPANY, INC.
ORDER TOLL FREE 877-ART-CLAY (877-278-2529)
IN WISCONSIN 262-884-4ART (262-884-4278)
PUBLISHED PRICES SUBJECT TO CHANGE WITHOUT NOTICE
WHEELS
BRENT®
Model B
Designed to fill the needs of school and studio potters. Competitively priced, this wheel is
quiet and solid under a load of 25 pounds of clay. The B has the table and drive system of
the C, combined with a 1/3 HP motor for the power and weight necessary for school use.
This wheel has a 12 inch head. Splash pan included. 110V, 6 amps.
Shipping Dimensions: 281/2" x 23" x 231/4" high, Shipping Weight: 100 lbs.
Model C
The standard no one can match. It centers 50 pounds with a 1/2 HP motor and has a
reputation for mechanical efficiency, long life and quiet, vibration-free dependability. The
14-inch cast and machined aluminum head runs on permanently sealed double row ball
bearings. 110V, 8 amps.
Shipping Dimensions: 281/2" x 23" x 231/4" high. Shipping Weight: 105 lbs.
Model CXC
The top of Brent's wheel line. A heavy-duty wheel, made for the potter who requires strong,
consistent performance. The CXC has a 14 inch head, heavy 5/16 inch steel table, a 1 HP
motor, and an 8 groove poly-v belt drive to give the best combination of power and efficiency.
This wheel can center up to 100 pounds of clay. 110V, 10 amps. Reversing switch and
silencer are standard equipment.
Shipping Dimensions: 281/2" x 23" x 231/4" high. Shipping Weight: 122 lbs.
W
H
E
E
L
S
Brent® ie
The affordable answer for the occasional potter. It’s lightweight and is ideal for your home
studio or for traveling to demonstrations. 110V, 5 amps
Shipping Dimensions: 171/2" x 16" x213/4", Shipping Weight: 79 lbs.
Brent® Stool
Made from heavy gauge tubular steel with a durable enamel finish. It stands 18 inches high
and can be used with all wheels.
Shipping Dimensions: 171/2" x 16" x213/4", Shipping Weight: 11 lbs.
Brent® Price List
BR22604E . . . . . . . . . . . .Model B . . . . . . . 1,395.00
BR22608J . . . . . . . . . . . .Model C . . . . . . . 1,495.00
BR22612N . . . . . . . . . . Model CXC . . . . . . 1,595.00
BR22780Y . . . . . . . . . . . Model IE . . . . . . . . 995.00
BR22281F . . . . . . . Splash Pan (Yellow). . . . . 49.95
BR22636T . . . . . . . . . . . . . Stool. . . . . . . . . . . 74.00
Plus freight F.O.B. Indianapolis, 46254
IN WISCONSIN 262-884-4ART (262-884-4278)
60
WHEELS
Pacifica
W
H
E
E
L
S
For over 20 years, the Pacifica Potter’s Wheel has been designed, redesigned and continually improved to bring you the best potter’s
wheel for the money. There is no part of the Pacifica Wheel where quality has been compromised. From the heavy, 13" machined
aluminum throwing head, to the welded steel frame with its durable molded table top, and the easy to install, remove and clean splash
pan, the Pacifica gives you long lasting quality every step of the way. The GT 400 and the GT 800 feature:
• First Quality Construction.
• The quietest and smoothest wheel at all speeds.
• Extra torque, producing consistent RPMs.
• The MAGIC PEDAL produces smooth, dependable power:
– is smooth at low speeds
– adjustable to your own needs
– comfortable and solid
– sensitive to speed increases
– guaranteed against defects in labor and materials and guaranteed to never wear out
• Easy reverse by simply moving a plug.
• A large sturdy work table.
• A steel frame which assures stability.
• Modular construction allowing easy and efficient repair.
• Splash pan included.
Four separate poly belts, operating at 12:1 reduction, transmit more torque than you need to throw 100 lbs. of clay. The Glyde Torc 400
develops over 1/2 HP, 110V, 2.2 amps, while the Model 800 develops over 1 HP, 110V, 5.2 amps. More efficient and quieter than a gear
drive, the Pacifica delivers high torque even at slow speeds. Pacifica’s custom designed load sensor increases the drive current in exact
proportion to the load on the clay, thereby providing constant speed from 0 to 260 plus RPMs. You can even set a separate maximum
speed adjustment between 200 and 300 RPMs. Your Pacifica delivers more power for the price than any other model made.
PGT400 . . . . . . . . . . GT400. . . . Ship Wt. 85 lbs.. .$895.00
PGT800 . . . . . . . . . . GT800. . . Ship Wt. 101 lbs.. 1,015.00
PPAN. . . . . . . . . . . .Splash pan . . . . . . . . . . . . . . . . . . .42.00
Plus freight to A.R.T. or final destination F.O.B. California 91746
Soldner
Model S50 & S100
A studio size, the Model S50 wheel is capable of centering 50 pounds of clay. Solid cast
aluminum superstructure with a 1/2" marine plywood top finished with polyurethane. A 1/6 HP,
115V, 1.5 amps. permanent magnet motor, 14" removable wheelhead, 1" shaft, 2 roller
bearings, on/off forward/reverse switch, 2 pin head system plus the finest speed controller ever
developed for the potter’s wheel. Shipped with legs detached. Shipping weight is 85 pounds.
Three year warranty. Uses a Brent splash pan.
The Model S100 has a 1/4 HP motor, 115V, 1.5 amps, 100 pounds centering capacity, and a
shipping weight of 95 pounds.
Model P100 & P200
Model S50
Model S100
The professional size Model P100 wheel is capable of centering 100 pounds of clay. A 1/4 HP
permanent magnet motor, 115V, 1.5 amps, 14" removable wheelhead, 1" shaft, 2 roller
bearings, heavy duty V belt/pulley drive. Top is 3/4" marine plywood with tough, polyurethane
finish. Adjustable height legs. On/off, forward/reverse switch, 2 pin head system, plus the finest
speed controller ever developed for the potter’s wheel. Shipping weight of 130 pounds. Three
year warranty. Optional half splash pan.
The Model P200 has a 1/2 HP motor, 115V, 1.5 amps, 200 pounds centering capacity, and a
shipping weight of 140 pounds.
SWS50 . . . . . . . . . . . . . .S50 Wheel . . . . $ 1,079.00
SWS100 . . . . . . . . . . . . S100 Wheel . . . . . . 1,206.00
SWP100 . . . . . . . . . . . . P100 Wheel . . . . . . 1,447.00
SWP200 . . . . . . . . . . . . P200 Wheel . . . . . . 1,591.00
SOL1/2PAN . . . . . . . Half Splash Pan . . . . . . 61.00
Plus freight to A.R.T. or final destination F.O.B. Colorado 80522
Model P100
Model P200
61
IN WISCONSIN 262-884-4ART (262-884-4278)
WHEELS
Creative Industries Model MP, HP
Creative Industries builds its potter’s wheels with an emphasis on ruggedness and long, reliable life. The 14” wheel head (standard on
both models) is manufactured from a 135/8 inch diameter steel plate which is welded to a 25 mm (.984”) steel shaft. This wheel head can
never come loose from its shaft. A reinforced engineering plastic is the injection-molded around the steel plate and over part of the steel
shaft as a bearing cover to ensure that clay or water can’t get to this component and damage it. Two large electric motor-quality bearings
support the shaft. The table top and legs are manufactured from an injection molded, reinforced engineering thermoplastic molded with
deep ribs for strength while being light in weight. Since the color is molded throughout the material, it cannot be scratched off and, of
course, plastic doesn’t rust. Amp variation depends on the user and the amount of clay placed on the wheel.
Advantages of a Creative Industries Wheel
• Smooth, soft electronic feel rather than the mechanical feel of
other wheels.
• Permanent magnet DC motors with exceptionally low vibration.
• Electronic filter system to eliminate motor hum for quieter,
“humless” operation.
• Sophisticated solid state electronic load sensing control which
maintains wheel head speed under changing loads.
• Adjustable high and low speeds (0-240 RPM is standard).
• Ultra smooth speed changes by computer control.
• Friction adjustment for foot pedal stiffness.
• Micro V belt system for extra smoothness and quietness.
• All wheels have the same size table top and frame.
• 5-year warranty, 100% parts and labor.
CIART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 425.00
CIPAN . . . . . . . . . . . . . . Splash Pan . . . . . . . . 45.90
Model
Motor Size
1
Artista /3 horsepower
Centering
Capacity
25 lb.
Wheel Head Drive Belt
11"
Micro V-belt
Weight
26 lb.
W
H
E
E
L
S
Clay Boss
The Clay Boss is designed with
the entry level student, artist
and hobbyist in mind. The
compact size and light weight
make it ideal for the potter with
a smaller studio area. Featuring
sturdy steel frame construction
and a 14” wheel head, the Clay
Boss has a centering capacity
of 50 lbs. 1 / 2 horsepower,
115 VAC.
• Table Size: 26” x 21”
• 14” Wheel Head
• 100 pound centering capacity
• Wheel Head Height: 19.5”
• Full Five Year Parts and Labor
Warranty
• Solid State Variable speed
electronic control with footpedal
• Splash Pan Included.
• Shipping Weight — 80 lbs.
CICB . . . . . . . . . . . . . . . . Clay Boss. . . . . . . $649.00
Big Boss
• Table Size: 26” x 21”
• 14” Wheel Head
• 175 pound centering capacity
• Wheel Head Height: 19.5”
• Full Five Year Parts and Labor
Warranty
• Solid State Variable speed
electronic control with footpedal
• Splash Pan Included.
• Shipping Weight — 80 lbs.
CIBB . . . . . . . . . . . . . . . . Big Boss . . . . . . . $749.00
Plus freight for all of the above wheels to A.R.T. or final destination
F.O.B. California 92020
The Clay Boss is designed with
the entry level student, artist
and hobbyist in mind. The
compact size and light weight
make it ideal for the potter with
a smaller studio area. Featuring
sturdy steel frame construction
and a 14” wheel head, the Clay
Boss has a centering capacity
of 50 lbs. .85 horsepower, 110
to 250 VAC.
IN WISCONSIN 262-884-4ART (262-884-4278)
62
WHEELS
Shimpo
Skutt Kickwheels
The Shimpo Potter’s Wheel is recognized as the highest state
of the art. It is uniquely engineered for ease of operation and
trouble-free performance. Design of the wheel is so simple that
the user never has to struggle with equipment operation. A
Shimpo wheel responds immediately without noise or vibration.
At any speed, wheel rotation remains smooth and powerful.
Thomas-Stuart kickwheels are efficiently designed to provide
maximum performance and durability. They are built to the
highest standards of quality, meeting the most stringent
demands of professional and amateur potters alike.
The frame is formed entirely of rigid steel pipe which is
galvanized to be rust proof. The bolt together construction
eliminates the common problems of tight corners and stairways.
The frame’s unique design has a 4 point stance which offers
stability unmatched on the market today.
The 140 lb. flywheel is accurately cast with a full two inches of
concrete. This combined with the true balancing of every
flywheel gives you a precision wheel at a reasonable price. The
flywheel turns a 14" cast aluminum work head, drilled for 10"
on center bat pins.
The seat is completely adjustable, both forward and back, up
and down. This combined with adjustable footrests make the
Thomas-Stuart wheel comfortable for everyone.
The large tabletop and seat are made of selected plywoods,
first stained then sealed with marine varnish for durability.
Anti-Skid surfaces on both footrests and the flywheel plus the
elimination of all sharp corners gives you a wheel that is safe
for classroom and studio use.
The optional splash pan is cast aluminum and is designed to
slip on and off with ease.
The motor attachment has a 1/3 horsepower motor, 110V, 3.6
amps, which is totally enclosed to prevent dust from damaging
its internal components. The motor attachment, without any
modification, can be added to the wheel at any time.
Specifications: floor space 34" x 37", height 31", shipping
weight assembled 215 lbs.
Kickwheel: 14" wheelhead, bolt together design, 4 year
warranty
Options: cast aluminum slip-on splash pan
Motor Attachment (optional), 5 year warranty
Shipping Classes: 70 unassembled.
RK–Whisper
W
H
E
E
L
S
At the heart of the RK series wheel is the patented RX infinitely
adjustable speed drive system. Unlike conventional DC motor
drives, the RX adjustable speed drive automatically increases
torque as much as 700% at speeds as low as 1 RPM — plenty
of power at slow speed — allowing for sensitive shaping,
decorating and trimming. Features:
• Heavy-duty steel construction for durability.
• Patented RX traction drive system increases torque
automatically, maximizing power at slow speeds.
• Direction of wheelhead rotation is switch-controlled to
accommodate left and right
handed users.
• Fixed foot pedal with arm
lever — compact design saves
space and eliminates cords.
• Two year warranty.
• Dimensions - 26” x 18” x 19”
• RK–Whisper, 1/2HP Motor,
400W, 115V, 3.5 amps, centering 100 lbs.
RK-WHISPER . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 1095.00
VL–Whisper
• Unique PWM controller + Industrial grade potentiometer +
Poly-V drive system to provide greater motor efficiency and
speed control by maximizing motor power with extremely
smooth speed adjustment.
• Fully enclosed body case keeps internal parts dry and clean.
• Removable bottom plate for easy access to interior.
• Detachable foot pedal for maximum comfort and flexibility.
• 14” wheelhead for large pieces.
• Two year warranty
• Dimensions - 231/8” x 271/2”
x 223/4”
• 1/2HP Motor, 400W, 115V,
3.5 amps, centering 100 lbs.
VL-WHISPER. . . . . . . . . . . .
$ 1,195.00
TSUK . . . . . Unassembled Kickwheel
. . . . . . . . . . w/14" wheel head . . . . . . . . . . . . . . .770.00
TSPAN . . . . . . . . . .Splash pan . . . . . . . . . . . . . . . . . . .55.00
TSMA . . . . . . . . Motor attachment . . . . . . . . . . . . . . .340.00
Plus freight to A.R.T. or final destination F.O.B. Portland, OR97206
Accessories
Easy Two-Piece Splash
Pan — for Whisper, RK’s, and Masters Velocity. Both pieces of
the splash pan remove quickly and easily for cleaning or when
throwing larger ware.
63
IN WISCONSIN 262-884-4ART (262-884-4278)
WHEELS • KICKWHEELS
Thomas-Stuart Electric Wheels
Classic styling, extra heavy duty construction and an elegant
powder coated finish make the Thomas-Stuart electric wheels
the ultimate equipment for the serious potter. Two Year Warranty.
All three models of our electric wheel are built on a heavy cast
aluminum housing with oversize legs to provide stable support
while throwing. Our design integrates a large work area for
holding water buckets, tools and clay. All Thomas-Stuart
electric wheels incorporate a built in splash pan.
The Classic model delivers power and performance at an
affordable price. Designed for both schools and studio potters,
this 1/3HP wheel centers more than 75 pounds of clay with ease.
The Elite model offers more power with a 1/2HP motor. Clay
throwing capacities of more than 110 pounds make this model
the most powerful in the industry with this motor size.
The Professional model offers the most power on the market today.
This larger 1HP motor makes this wheel the heaviest duty wheel
available. It challenges you to push the limits of your imagination.
Thomas-Stuart uses only constant duty industrial motors which
are almost twice the size of most competitors. Our motors are
capable of running all day without over-heating or losing power.
We also utilize an industrial motor controller with several
adjustable stages for peak performance. Our motors combined
with these controllers set our wheels apart by providing
constant torque through all speed ranges. All three wheels
include a motor direction reversing switch.
Each wheel comes with a 14” flat aluminum wheel head,
accurately machined with concentric lines for ease in
positioning work on center. The wheelhead is removable by
simply twisting and lifting up on the wheelhead.
Quick changing of the head to our optional plaster cuphead takes
just a few seconds. Each plaster bat drops into the cuphead and
is immediately centered while being held in place by a tapered fit.
The optional shaft extension allows you to raise the wheelhead
above the wheel base to facilitate oversized pots uo to 48” in
diameter.
Options: shaft extension to raise wheelhead above splash pan
for oversized pots, removable cup head & plaster bat rings both
12” & 16”, leg extensions for converting to a stand up wheel
The Removable Splash Pan Wheel
The newest wheel in our line has a one piece detachable plastic
splash pan. Just twist and lift the wheel head to remove the
splash pan in one piece. This design is stronger and easier to
use than the standard two-piece splash pans on other wheels.
The splash pan also offers a larger area for clay collection. It is
offered two different models:
Legend (1/3hp) model delivers power and professional
performance at an affordable price. Designed for most studios
and classrooms, this wheel centers more than 100 lbs. of clay
with ease.
Premier (1 hp) model offers more power with its larger motor.
Clay throwing capavities exceeds 400 lbs.
TSL . . . . . Legend, 1/3HP Motor, 110V, 3.6 amps. . . . . . . . $ 1,220.00
TSPREM . . Premier, 1HP Motor, 110V, 11 amps . . . . . . . . 1,495.00
W
H
E
E
L
S
TSC Classic, 1/3HP Motor, 110V, 3.6 amps, Ship Wt. 105 lbs. . . $1,220.00
TSE Elite, 1/2HP Motor, 110V, 5.2 amps, Ship Wt. 110 lbs. . . . . 1,325.00
TSP Professional, 1HP Motor, 110V, 11 amps, Ship Wt. 125 lbs. . . . 1,495.00
TSSXT Shaft Extension . . . . . . . . . . . . . . . . . . . . . . . . .68.00
TSLX Leg Extensions for Stand Up Wheel . . . . . . . . .160.00
Plus freight to A.R.T. or final destination F.O.B. Portland OR,
97206
IN WISCONSIN 262-884-4ART (262-884-4278)
64
KICKWHEELS • BANDING WHEELS
Shimpo
Shimpo continues to offer the ideal in banding wheels which
create a solid, steady, and reliable surface especially needed
when applying delicate and fine touches to your work.
• Heavy duty cast-iron construction
• Smooth, precise rotation
• Concentric circles on wheel head
• Rust resistant finish
• Long-wearing sealed ball bearings
Key
A
B
C
D
Cat. No.
Description
Ship Wt.
SBW30M
SBW25H
SBW25L
SBW22L
113/4" D x 43/4" H
197/8" D x 71/2" H
197/8" D x 21/4" H
183/4" D x 21/4" H
28 lbs.
19 lbs.
15 lbs.
13 lbs.
Price
$105.00
90.00
80.00
60.00
B
C
A
D
65
IN WISCONSIN 262-884-4ART (262-884-4278)
WHEEL ACCESSORIES
Universal Bats
Plasti-bats
Universal bats from Creative Industries are strong, molded
plastic and ribbed on the underside to provide a smooth, level
work surface on top. Installs by simply placing on the bat pins
in your wheelhead. No bolts or wing nuts to screw. Fits
wheelheads with 9" and 10" center to center pins.
CI12BAT. . . . . . . . . . . . .12" Round . . . . . . . . . 6.70
CI14BAT. . . . . . . . . . . . .14" Round . . . . . . . . . 7.70
Plasti-bats are the longest lasting plastic bats available today.
They are virtually indestructible. Plasti-bats never wear out due
to continuous heavy usage. Soaking in water will not harm or
warp them. They will not splinter, delaminate, swell or shrink.
The bat pin holes remain just as drilled and will not become
oversized with use. They are textured on one side and smooth
on the other. Plasti-bat is a non absorbent, positive adherence
surface. Clay does not slide or turn loose while centering and
the totally clean, permanent surface is not irritating to your
hands. NOTE: If you are changing over from plaster or if you
keep your pieces plastic wrapped, we advise cutting your
pieces free from the bat as your last step in throwing.
Cat. No.
Description
Pin Distance No. Pins
Price
BATPD8
18" Drilled
16"
2
$ 9.95
BATPD12
12" Drilled
10"
2
14.95
BATPD14
14" Drilled
10"
2
17.95
BATPD16
16" Drilled
10"
2
28.95
BATPD20
20" Drilled
10"
2
44.95
Batmobile
A great way to store your unused bats. The Batmobile can hold
60–90 bats, depending on thickness, and has an adjustable shelf
to accommodate 12" to 14" bats. Dimensions are 42" x 35" x 14".
Shipping dimensions 43" x 19" x 5". Shipping weight 60 lbs.
BR22066J . . . . . . . . . . . .$445.00
Thomas Stuart Universal Potter’s Stand
Place the universal potter’s stand next to any wheel to hold
clay, pots, tools, or the new Thomas Stuart universal ware
boards. All shelves are completely adjustable to any desired
height. Shelves lock into support arms to prevent items from
tipping off. All shelves and optional ware boards are made from
laminated aluminum which is lightweight, yet incredibly strong.
More shelves can be added at any time. Ware boards fit
snuggly inside of each shelf.
TSUS. . . . . . Universal Potter’s Stand . . . . . $250.00
IN WISCONSIN 262-884-4ART (262-884-4278)
66
W
H
E
E
L
S
WHEEL ACCESSORIES
Giffin Grip® (New Model 10)
The Giffin Grip is a re-centering tool for potters. Designed
specifically for trimming, it works equally well for waxing the
foot or banding with oxides. After a simple one-time adjustment,
the Giffin Grip quickly snaps on and off your wheel. It halves
the time previously spent in trimming and makes it practical to
trim shapes that would otherwise have been left untrimmed.
Shipping Weight 6 lbs.
• The Giffin Grip will cut your trimming time in half. It simply
snaps on the wheel and centers your pots in seconds.
• The Giffin Grip holds all shapes and sizes of pots. It is 151/2”
in diameter and will hold up to 14”.
• The Giffin Grip will not stick to the rim of your pots.
• Constructed of the finest materials available, the Giffin Grip
is built to last. It is designed to withstand years of continuous
studio use.
• Fits any potters wheel with a removable splash pan, or
sufficient side clearance to mount a 16" (42 cm) diameter round
plate on top.
GRIPA . . Standard (counter clockwise) Giffin Grip . . . . . . . .$199.95
W
H
E
E
L
S
67
IN WISCONSIN 262-884-4ART (262-884-4278)
WHEEL REPAIR PARTS
Brent®
Cat. No.
BR22039X
BR22038W
BR22041B
BR22285K
BR22043D
BR22203H
BR22014P
BR22012M
BR22019X
BR22017T
BR22144H
BR22143G
BR22102F
BR22141E
BR22599S
Giffin Grip®
Description
Price
Belt for Models B & C
$ Call
Belt for Model A
Call
Belt for #15, orange, 110V
Call
Belt Guard, Models B, C, CXC
Call
Drive Ring, #15
Call
Cone, #15, cast iron
Call
Machined Head 12 X 1 (kickwheel only)
Call
Machined Head w/bearing 12 X 3/4
Call
Machined Head 14 X 1 (kickwheel only)
Call
Call
Machined Head w/bearing 14 x 3/4
Foot Pedal complete w/cord
Call
Electric Assembly for foot pedal, w/cord
Call
Circuit Control Board (D-30, 110V)
Call
Control Box, complete, all models, 110V
Call
Control Box, complete, all models,
Reversing, 110V
Call
BR22108M Line Cord, all models, 110V
Call
BR22107L Bridges-Rectifier
Call
BR22133T Fuse, Models C, CXC, 110V
Call
BR22132S Fuse, Models, A, B, 16, 110V
Call
BR22000H Fuse, all models, 220V
Call
BR22130P Fuse, #15, 110V and 220V
Call
BR22134W Fuseholder, Bussman
Call
BR22117A Switch, all models
Call
BR22120D Switch, #15 on/off
Call
BR22121E Switch, #15 Reversing
Call
BR22723C Silencer for Reversing 110V
Call
BR22725E Silencer for Reversing 220V
Call
BR22147L Switch, EJ, complete w/cord
Call
BR22693M Brush, motor, for model CXC
Call
BR22692L Brush, motor, for model C
Call
BR22691K Brush, motor, for models A & B
Call
BR22227M Motor, 1hp, model CXC, 110V
Call
BR22228N Motor, 1/2 hp, model C, 110V
Call
BR22232T Motor, 1/3 hp, models A, B, 16, 110V
Call
BR22236A Motor, #15, 110V
Call
BR22048J Large pulley, all models,
Call
MUST specify model CXC = 8 grooves, all other = 4 grooves
BR22050L Large pulley, #15, 110V
Call
BR22046G Small pulley, model CXC
Call
BR22045F Small pulley, model C
Call
BR22044E Small pulley, models A & B
Call
BR22049K Small pulley, #15
Call
BR22493G KWK Flange, 1" collar
Call
BR22494H KWK Shaft, 1" collar
Call
BR22017P Flywheel for models J & EJ
Call
BR22064G Rubber tire for model EJ
Call
BR22516D Top, models J & EJ
Call
BR22021A Top, #15, complete
Call
BR22135X Bat pin
Call
BSTK10
BBS3
BWS3
BB3
NBPKG1
R15W15
RH23
RH33
RH43
RH53
RH63
HFR3
OR2S3
CFP1
GGB1
FP3
PBS3
TP1
BP1
INS1
Blue Sliders Tuneup Kit, Model 10
$49.95
Blue Basic Slider with pad, Set of 3
29.95
Blue Wide Slider with pad, Set of 3
19.95
Bottom Bracket, Set of 3
19.95
Nuts and Bolts for Bottom Brackets
1.79
15 Rods with 15 Molded Hands
39.95
2" Rods with Molded Hands, Set of 3
9.95
9.95
9.95
9.95
9.95
Molded Hands for grooved 07 Rods (3)
4.95
2 O-Rings with 3 Shims
3.50
Center Foam Pad for trimming bottles
7.95
Giffin Grip Carrying Bag, Sturdy Canvas 29.95
Foam Pads for original black sliders (3)
2.95
Molded Pads for Blue Sliders (3)
6.95
Top Plate for Giffin Grip
70.00
Bottom Spiral Plate - Specify Direction 70.00
Giffin Grip Instruction Sheet
2.00
IN WISCONSIN 262-884-4ART (262-884-4278)
W
H
E
E
L
S
68

Types of Wheels

Transcription

Similar documents

VL-Whisper - Clay

Pool of Radiance^Codewheel

Tactair Paris Air Show Evite 2015

T-REX Manual - RC Helitechnics

22 inch wheel package special!

itsgames.com

Motorcycle Wheel Balancing and Truing Stand Assembly Instructions

PlanWheel XLU3 Spec Sheet MASTER

Pottery Wheel Mania!

Pottery Wheel: Making a bowl, basic step by step guide