INSTRUCTION BOOKLET 18 Professional Flexi-Stylers Model No: NHS004

18 Professional Flexi-Stylers
INSTRUCTION
BOOKLET
Model No: NHS004
HOUSEHOLD USE ONLY
Please READ and RETAIN for future reference.
CONTENTS
ITEM
PAGE No.
Features of your Flexi-Stylers
3
Using your Flexi-Stylers
4
Preparing for use
Usage
Safety Precautions
7
Hints and Tips
7
Cleaning and Maintenance
7
Storage
Important Safeguards
8
Connection to the mains supply
10
Aftersales Service
12
Customer Service Address Details
Guarantee
2
13
FEATURES OF YOUR NICKY CLARKE FLEXI-STYLERS
q
w
e
1. Flexi-Stylers
2. Case
3. Neon indicator light
The illustrations used in these instructions may differ slightly from the actual unit supplied.
3
USING YOUR NICKY CLARKE FLEXI-STYLERS
PREPARING FOR USE
Please read these instructions before operating this appliance
and retain for future reference.
Not suitable for use in a bath or shower.
WARNING: Do not use this appliance near bathtubs, showers,
basins or other vessels containing water.
1. Remove all packaging and keep safe until satisfied with your
product.
2. DO NOT plug in until ready to use.
USAGE
This appliance is fitted with a 'Positive Neon Heat Ready System'
for easy guide to all heating requirements.
1. The flexi-stylers can be used on damp or dry hair. If being used on
damp hair, ensure hair is 80% dry.
2. Ensure all flexi-stylers have been straightened and are placed in
the slots inside the case.
3. Ensure the case is closed. Position the unit on a flat, hard, heat
resistant surface ensuring it is stable.
4. Fully unwind the mains cable and plug the unit into a suitable
mains supply and switch on. The heater starts warming the
flexi-stylers and the neon indicator light will illuminate.
Do not cover the unit during the heating cycle.
5. After approximately 10 minutes the heater will cycle off and the
neon indicator light will go out. The flexi-stylers are now at a
gentle heat, suitable for fine, sensitive hair.
6. After approximately 12 minutes, the heater will cycle on to
continue heating the flexi-stylers. The neon indicator light will
illuminate.
4
7. After approximately 15 minutes, the heater will cycle off again and
the neon indicator will go out. The flexi-stylers are now at
medium heat, suitable for normal hair.
8. After approximately 17 minutes the heater will cycle on to
continue heating the flexi-stylers and the neon indicator will
illuminate.
9. After approximately 20 minutes, the heater cycles off and the neon
indicator will go out. The flexi-stylers are now at maximum heat,
suitable for thick, difficult to style hair.
The NHS004 will now continue to cycle at maximum heat until it is
unplugged from the mains supply.
The cycling action of the neon indicator light will remind you to unplug
the unit after use.
NOTE: Hair types outlined are there for guidance only. Some
experimentation will be needed to discover the best temperature
setting for your hair type and style.
USING FLEXI-STYLERS
1. Take a section of hair and comb straight, holding taut with one
hand.
2. Place a pre-heated flexi-styler parallel across the inside of the
section of hair, approximately 50mm (2 inches) from your roots.
There should be 25mm (1 inch) of the flexi-styler on one side of
the section of hair.
3. Now take the end of the hair section and wind round the
flexi-styler all in one movement. It is important not to let go of the
hair.
4. Now holding the ends of the flexi-stylers, unwind a little, and then
rewind so you trap the ends of the hair and stop it from
unravelling.
5. Secure by folding the ends of the flexi-styler over each other.
NOTE: The finished result is governed by the size of sections you
take, the positions of the flexi-stylers, and the length of time the
flexi-stylers are left in your hair.
5
FOR CURLS WITH MORE VOLUME
You can create even more volume by twisting your hair before
winding it onto the flexi-styler. To do this, take a small section of your
hair, twist and wind round the flexi-styler. Now twist the flexi-styler in a
semi circle. Continue working in this manner before turning over the
ends of the flexi-styler to secure in the normal way. Leave the
flexi-stylers until completely cool before removing.
FOR LOOSER CURLS AND WAVES
To achieve smooth results it is essential that
you work cleanly and neatly. Working from a
centre or side parting take 75mm (3 inch) wide
sections.
Drag your hair down flat to your head, and wind
onto the flexi-stylers. Do not wind the flexi-styler
completely up to the root, instead leave 75mm
(3 inches) of hair in order to achieve a smoother
look.
FOR TIGHTER SPIRAL CURLS
Work straight back from your hairline and
divide your hair into small sections - each
approximately 25mm (1 inch). Wind onto the
flexi-stylers as described.
FOR SOFT TUMBLING CURLS
Work straight back from your hairline, dividing
your hair into medium sections - each
approximately 50mm (2 inches) and wind onto
flexi-stylers as described.
6
SAFETY PRECAUTIONS
•
•
•
Do not immerse the case in water or any other liquid.
Switch off the unit and allow to cool completely before cleaning
and storage
Unplug the unit immediately after use.
HINTS AND TIPS
•
Keep the ends of the hair flat against the flexi-styler when
wrapping hair around, this will avoid kinks at the ends.
CLEANING AND MAINTENANCE
1. Switch the flexi-stylers off by unplugging from the mains supply
and allow to cool fully before attempting to clean.
2. The case may be cleaned by wiping over with a soft, damp
cloth. Do not immerse the case in water or get any water
inside the case.
3. The flexi-stylers may be washed in warm water. If necessary a
little washing up liquid can be used. The flexi-stylers must be
allowed to dry thoroughly before being placed back in the case.
4. Do not use harsh abrasives or cleaners.
STORAGE
•
•
•
•
Ensure the unit is completely cool and dry.
Do not wrap the supply cord around the appliance.
Store in original box in a cool, dry place.
Store in a safe place, away from children.
7
IMPORTANT SAFEGUARDS
This product is not suitable for use by children, and may not be
suitable for persons requiring supervision unless they receive
instruction by a competent person on how to safely use the product.
Children should be supervised to ensure that they do not play with this
appliance.
•
•
•
Do not immerse the unit, mains cable or plug in water or any other
liquid.
Unplug the unit before cleaning.
Take care when handling hot styling rods.
FOR HOUSEHOLD USE ONLY
ALWAYS...
✔ always return the appliance as stated in the Aftersales service
after a malfunction, or if it has been damaged in any manner.
There are no user serviceable parts
✔ always ensure hands are dry and hair is free from excess water
before handling the plug or switching on the appliance.
✔ always unplug the appliance from the mains supply when not in
use, prior to use and before cleaning.
✔ always keep out of reach of children.
✔ always take special care when using near children or people who
are insensitive to heat.
✔ always allow to cool before cleaning and storing away.
✔ always allow the appliance to cool on a heat resistant surface.
✔ always carry out regular checks of the mains cable to ensure that
no damage is evident. Should there be any signs that the cord is
damaged in the slightest degree, the entire appliance should be
returned as stated in the Aftersales service to prevent a hazard.
✔ always fully unwind the mains lead before plugging in.
8
NEVER...
✘
never immerse electrical appliances in water or any liquid to
protect against electrical hazards.
✘
never use in a bathroom or near any source of water/liquid.
✘
never use this appliance outdoors.
✘
never wrap the mains lead around the appliance. Avoid twisting
or kinking it.
✘
never carry or suspend the appliance by the mains lead.
✘
never cover the unit during use or put down on soft furnishings or
bedding.
✘
never use after malfunction or damage to the mains lead occurs.
✘
never use for any purpose other than those described in these
instructions.
✘
never place the appliance on unprotected polished surfaces.
✘
never leave the product unattended when switched on.
✘
never leave the unit plugged in after use.
Note: Currently the fitting in a bathroom of an electrical
socket for, or capable of, operating the appliance, is not
permitted in the UK (see BS7671). Nevertheless, E.C.
Standard EN60335-2-23 requires us to advise you of the
following: If the appliance is used in a bathroom, unplug
it after use. The presence of water presents a hazard even
when the appliance is switched off. For additional
protection, you should install a residual current device
(RCD) with a rated residual operating current not
exceeding 30mA, in the electrical circuit supplying the
bathroom.
Your electrician will advise you of this.
9
CONNECTION TO THE MAINS SUPPLY
When using electrical appliances, basic safety precautions should
always be followed.
If this appliance is fitted with a rewireable BS1363, 13 amp plug, the
fuse should be rated at 3 amp and be ASTA approved to BS1362.
However if the plug is unsuitable, it should be dismantled and removed
from the supply cord and an appropriate plug fitted as detailed
opposite.
If this appliance is fitted with a moulded BS1363 13 amp plug, the
fuse should be rated at 3 amp and be ASTA approved. If the fuse in a
non-rewireable plug needs to be changed the fuse cover needs to be
refitted. The appliance must not be used without the fuse cover fitted.
In the event of the plug being unsuitable, it should be changed and an
appropriate plug fitted as detailed opposite. If you remove the plug it
must not be connected to a 13 amp socket and the plug must be
disposed of immediately.
10
CONNECTION TO THE MAINS SUPPLY
Please check that the voltage marked on the product corresponds
with your supply voltage.
WARNING: This appliance MUST be earthed.
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your
plug, proceed as follows:
The wires of the mains lead are coloured in accordance with the
following code:
GREEN AND YELLOW - EARTH
BLUE – NEUTRAL
BROWN – LIVE
The wire which is coloured Green and Yellow, must be connected to
the terminal in your plug which is marked with the letter E or by the
Earth symbol
or coloured Green or Green and Yellow.
The wire which is coloured Blue, must be connected to the terminal
which is marked with the letter N or coloured Black
The wire which is coloured Brown, must be connected to the terminal
which is marked with the letter L or coloured Red.
If any other plug is used, a 3 amp fuse must be fitted either in the plug
or adaptor or at the distribution board.
Plug should be BS1363/A approved.
Fit a 3 Amp fuse.
EARTH
(Green/Yellow)
NEUTRAL
(Blue)
Fit a 3 Amp fuse
LIVE
(Brown)
Ensure that the outer sheath of the cable is
firmly held by the clamp.
11
AFTERSALES SERVICE
This appliance is built to the very highest of standards. There are no
user serviceable parts. Follow these steps if the unit fails to operate.
1. Check the instructions have been followed correctly.
2. Check the fuse has not blown.
3. Check the mains supply is functional.
If the appliance will still not operate then return the appliance to the
place you purchased it.
If the supply cord is damaged the appliance must be returned to
the manufacturer for replacement to prevent hazard.
DO NOT attempt to repair it yourself.
Follow these instructions:
1. Pack it carefully, preferably in the original carton. Ensure unit is
clean.
2. Enclose your name and address and quote the model number
NHS004 on all correspondence.
3. Give the reason why you are returning it.
4. If within the guarantee period, state when and where it was
purchased and include proof of purchase (e.g. till receipt).
5. Send it to our Customer Service Department at the address
below:
CUSTOMER SERVICE DEPARTMENT
Pulse Home Products Limited
Middleton Road
Royton
Oldham OL2 5LN
Tel: 0161 621 6900 Fax: 0161 626 0391
E-mail: info@pulse-uk.co.uk
12
GUARANTEE
This product is guaranteed for a period of 1 year from the date of
purchase against mechanical and electrical defects.
This guarantee is only valid if the appliance is used solely for
domestic purposes in accordance with the instructions provided, that
it is not connected to an unsuitable electricity supply, dismantled or
interfered with in any way or damaged through mis-use. Under this
guarantee we undertake to repair or replace free of charge any parts
found to be defective.
Nothing in this guarantee or the instructions relating to the product
excludes, restricts or otherwise affects your statutory rights.
In line with our policy of continuous development, we reserve the right
to change this product, packaging and documentation without notice.
This product is manufactured to comply with the radio interference
requirements of EEC directive 93/68 EEC.
Vine Mill
Middleton Road
Royton
Oldham
OL2 5LN
UK
Nicky Clarke is a trademark.
13
14
15
Pulse Home Products Ltd.
Middleton Road,
Royton
Oldham OL2 5LN
92874-3
NHS004_Iss4 07/10