CleanWave Mini – Water Treatment Service Electrocoagulation Technology for Water Recycling

WATER MANAGEMENT SOLUTIONS
CleanWave® Mini – Water Treatment Service
Electrocoagulation Technology for Water Recycling
Halliburton’s mobile CleanWave® system uses an electrical
process that has the capacity to destabilize and coagulate
suspended colloidal matter in water. When contaminated water
passes through the electrocoagulation cells, the anodic process
releases positively charged ions which bind onto the negatively
charged colloidal particles in water resulting in coagulation. At
the same time, gas bubbles, produced at the cathode, attach to
the coagulated matter causing it to float to the surface where it
is removed by a surface skimmer. Heavier coagulants sink to
the bottom leaving clear water, suitable for use in drilling and
production operations.
Smaller Footprint Mobile Treatment With
Independent Utility
Halliburton’s mobile CleanWave system provides an all-inclusive
water treatment system in two modified shipping containers. One
unit is dedicated to water treatment. Emulsified waste water is
pumped through the low pressure electrocoagulation treatment
cells and passed into any number of optional external coagulation
chambers. During this stage the agglomerated solids rise to
the top and are separated by a mechanical skimmer. Heavier
solids sink to the bottom for later removal. Chemical injection
accelerates the coagulation process and adjusts the water pH to
within a programmable range. After the settling stage, the water
passes through a media filtration stage to remove any remaining
suspended solids.
The system constantly monitors water quality and pH
characteristics. Water quality data is stored for record keeping and
analysis. A monitoring system uses a cellular connection to notify
operators of problems or errors with email alerts.
The accessory unit contains a 400 V, 50 Hz, Hz, 230, a three-phase
diesel generator capable of supplying all necessary system power
as well as power to additional equipment, such as a dissolved
air flotation (DAF) unit. The entire accessory unit, including the
system supply pumps, can operate independently of the water
treatment stage for additional utility.
Performance Specifications
Parameter
Removal
Total Petroleum Hydrocarbon (TPH)
95-99%
Total Suspended Solids (TSS)
95-99%
Total Iron and Heavy Metals
95-99%
Equipment General Specifications
Power Supply 200 kVA / 400 V / 50 Hz / 230 A
Throughput
6 BPM / 57 m3/hr / 960 L/m
Dimensions
Two Conex Containers Measuring (LxWxH)
12.2 m x 2.4 m x 2.6 m (40 ft x 8 ft x 8.5 ft)
The above graphic represents the smaller version of the CleanWave system.
Key Features
• 95-99% reduction in total suspended solids (TSS), total
petroleum hydrocarbon (TPH), and heavy metals
• Treats water with TDS ranging from 100 – 300,000 mg/L
• Coagulates particles < 1 micron
• Reduces turbidity to < 10 NTU
• Average sludge generation < 5%
• Breaks emulsions
WATER MANAGEMENT SOLUTIONS
For more information about how CleanWave® Mobile Water Treatment System can help improve your
environmental footprint, contact your local Halliburton representative or email multichem@halliburton.com.
© 2013 Halliburton. All rights reserved. Sales of Halliburton products and services will be in accord solely with the terms and conditions contained in the contract
between Halliburton and the customer that is applicable to the sale.
H010503 4/14
www.halliburton.com/multichem