Grip-less Golf Clubs

Grip-less Golf Clubs
The Clubmaker Swing Weight scale has a built-in
grip cap compensator and shaft holder that allows
for the swing weighing of grip-less golf clubs.
The grip compensater is designed to suit golf
grips with caps no thicker than 1/4" (6mm). Please
note that when the grip cap compensator does not
affect swing weight in any way whether it is in the
retracted or extended position.
To measure totalweight:
Rest the club in the shaft cradle so
that it lies perpendicularto the scale.
Slide the weight until the beam levels
up. Read the total weight in grams or
ounces on either side of the scale.
To measure componentweight:
Place the desired componentin the
weighing tray and about center.
Measure by sliding the weight until
the scale levels up. Read weight in
ounces or grams on either side of the
scale.
Please note: The weighingtray
should hang freely so it can swivel
unrestricted.
Reading the Bubble for precision
0
+/-0
Grams
level
-3 Grams
Back tilt
+3 Grams
Forward
tilt
1) Push the grip cap
compensator until it
clips into position.
This will prevent the
grip compensator from
moving when swing
weighing golf clubs.
Push
here
Grip cap
thickness
2) Place a golf grip on the weighing beam inside of
the built-in grip gutter. The grip must butt against the
grip back stop. You may want to place some 2-way
tape on the back of the grip cap to prevent it from
slipping during the weighing process.
Please note that
the grip should
be identical
to the grips that
are to be used for gripping the club or set of golf clubs.
3) When placing a gripless golf club on the
weighing beam the
shaft must butt against the
shoulder of the grip cap so that the
14” fulcrum can be referenced with
the added grip cap compensation.
TM
Auditor Clubmaker Swing Weight Scale
Stock #240806
Operation:
1) Unpackthe swingweight scaleand
remove allbindings usedto restrain
the beamduring shipping.
Bubble Level
2) Placethe scaleon a work bench.
Level thescale bywinding upthe
leveling thumbscrews untilthe
bubble levels readsdead center.
The Clubmaker swing weight
scale is a fine precision instrument
designed for measuring the swing
weight of golf clubs( 14" fulcrum) golf
club total weight and individual
component weight in both grams and
ounces.
It has a host of built in features that
enhances the speed and accuracy of
any swing weighing job, such as a
grip cap compensator for swing
weighing grip-less golf clubs,
precision bubble levels, and
perfect balance assembly
of the levered parts.
3) Ensure the beam is freeto swivel
smoothly by levelingoff theweighing
beam bysliding theweight tothe zero
mark.
We strongly recommend that you
read this instruction manual so you
can familiarize yourself with the scale
and to take full advantages of its
function and features. Thank you.
Golfsmit h Inte rn ati onal, Inc
1 1 0 0 0 N ort h IH-35 Austi n TX 7 8 7 5 3
1 -80 0 -45 6 3 3 4 4 w ww.golfsmit h.com
To measure swing-weight:
Place the butt end of the grip against
the grip back stop, the club
on top of the weighing beam as
shown. Slide the weight along the
scale until the beam levels up. The
swing weight reading is taken at the
mark on the sliding weight.