1 Knight’s sword activity kit

make & do activity kit
Knight’s sword
1
Glue printouts
of the blades
and the hilts
to white A4 card. Cut
them out. If you’re using silver card to make
the blades you can use
our blades as a pattern.
2
Apply glue to
the backs of
both
blades
and stick them together.
3
Place 1 sword
handle
face
down onto the
table. Spread glue over
the back. Place the
blunt end of the blade
onto it so that the top
meets the bottom of the
gold bar, as shown.
Spread glue on
the back of the
second sword
handle and place it on
top so that the blade
is now sandwiched inside the 2 halves of the
handle. Allow to dry.
This activity kit contains:
1 instructions sheet
2 template sheets
4
Things you will need
5
colour printed sword handle template
paper scissors
paper glue
thick white card (2 x A4 sheets)
optional:
silver card (1 x A4) for the blade (or use our template)
brown cord 2m (to wrap around the handle)
500 Harris St Ultimo
PO Box K346 Haymarket NSW 1238 Australia
tel: 02 6217 0111
web: http://play.powerhousemuseum.com
Decorating
it
with jewels or
by winding cord
around the handle.
Remember that even
though your sword is
cardboard it can still
hurt to be hit with it so
PLAY GENTLY.
Team
your
sword with our
helmet,
tunic
and shield for a complete knight’s outfit.
5
This work is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 2.5 License.
make & do activity kit
This work is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 2.5 License.
make & do activity kit
This work is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 2.5 License.