How to install and use Weblookup

How to install and use Weblookup
1. Unzip the contents of weblookup4.zip to your MixW Folder
2. Run MixW and go to the Modes Menu located at the top of the MixW
Screen.
3. Select Additional Modes Settings see Figure #1
4. When you click the the Additional Modes Settings a dialog box will
then open and you will fill out the box as shown in Figure #2
Page 1
Looking at Figure 2 note Arrow 1 fill in the title I used QRZ in arrow 2
this is the path that MixW will use to access the mixweblookup program
note the button at arrow 3 click that as it is the Windows Browse and go
to c:\program files\mixw and locate the file titled mixweblookup.exe
notice to the right of the button there is a check mark in the box be sure
to put one there. Click the OK button when finished and you’re all set. To
activate the program go back to the Modes Menu and select Additional
Modes See Figure 3
Arrow 1 when you click that option the menu of available external
programs will appear and you can click the QRZ (QRZ) program and it
will then be activated. As soon as a callsign is entered in the log bar you
can click on the Search button and the program will lookup the call if it’s
a Canadian call this Search will go to the Canadian callbook if it’s a
Russian call the Russian callbook will be displayed.. Tip… you can click
Page 2
on the MixW window and the MixW lookup will minimize to go back
and forth between the program and MixW do the Alternate Tab which
allows you to “Tab” between those programs running in the background
(Multi-tasking) 73 Jim, WA2VOS MixW Software USA
Page 3