Er:YAG Laser System

Er:YAG Laser System
SoberyTM series high-performance Er:YAG lasers, would be well applied for surgery
skin resurfacing in dermatology and aesthetic medicine.
SoberyTM produces beams concentrated laser which could absorb by water molecules
and converted to heat that can ablate or destroy unwanted tissues.
The depth of the penetration depends on the applied laser energy, and ranges from 30
um to 150 um.
SoberyTM is your desirable choice for resurfacing treatments with lower scattering
losses, fewer side effects,
and quicker recovery times.
Why 2940nm Er:YAG laser?
The Er:YAG laser produced 2940nm laser which has peak value of absorption to
water, then it can be well-absorbed by water. The absorption coefficient is 10 times of
CO2 laser.
So Er:YAG laser can dispel thinner tissue than CO2 laser, it can only penetrate the
skin moist a few microns
in depth, their skin in a time of relaxation 1-5ms, the extent of the damage stranded
heat also very light, not vaporization of the organization of the solidification of a thin
layer, bleeding only needle size.
The new fractional 2940nm laser that represents a new option to perform skin
resurfacing on aged and photo-damaged skin: it is a safe and effective treatment with
little patient downtime and discomfort, no analgesia and
no gel or consumables required.
JOYEE Technologies Co., Ltd I
Multi-treatment Mode to Patient’s Expectation
The penetrate depth depend on the pulse width of laser. So, you can choose and
control the treatment mode
by different pulse width to suit patients’ expectations. All the parameters setting just
on screen by touch.
Short pulse mode: with fast surface treatment
Long pulse mode: with deeper increased thermal effect
Mixed mode: alternate with short and long pulse
Fast and Effective Treatment with High Energy
●
●
●
High energy density output with wide range of pulse width adjust
Less treatment time with high repetition rate up to 10hz
Update to fractional application with optional MLA handpiece easily
Intelligent ICMSTM cooling system
ICMSTM is JOYEE’s superior design on water cooling system management. The
intelligent cooling
management system provided real time monitor for the water cooling status.
All the alerts of cooling system are monitored by MCU control system,once any
function work unproperly,
the MCU would protect the system with corresponding procedures.Thus, you can
work with Sobery™ for longtime without any worries and break.
JOYEE Technologies Co., Ltd II
Typical Application
●
●
●
Skin resurfacing for improvement fine lines and wrinkles, skin laxity, tone
Acne scar removal, superficial skin lesions revision
Pigmented lesions treatment
Specifications
Model
MPRT-610
MPRT-620
Laser Type
Traditional
Fractional
Wavelength（nm）
2940
2940
Repetition Rate（Hz）
1-10
1-10
Energy Density（Jm2,max）
1.5
1.5
Pulse Width（ms）
0.3-1.5
0.3-1.5
Spot Size（mm）
Φ2-7
10×10, Micro spot<100μm
water to air heat exchanger
water to air heat exchanger
220V/50Hz,110V/60Hz,16A
220V/50Hz,110V/60Hz,16A
920(H)×340(W)×800(D)
920(H)×340(W)×800(D)
100
100
Cooling System
Power Supply
Dimensions（mm）
Weight（kg）
JOYEE Technologies Co., Ltd III