FMCs “lean-journey” towards delivering more efficient projects for our customers Ingmar Westervik

FMCs “lean-journey” towards delivering more
efficient projects for our customers
Customer Support ER
Ingmar Westervik
4/23/2014
4/23/2014
XT Refurbishment Success 2014
1
FMC Technologies at a glance
An oilfield equipment
and services company
• $6.7 billion revenue in 2013
•
19,400 employees worldwide
•
27 production facilities in 16
countries
•
FORTUNE® Magazine 2012
World’s Most Admired Oil and Gas
Equipment, Services Company
4/23/2014
XT Refurbishment Success 2014
2
Customer Support Eastern Region
Scotland
Norway
Russia
Italy
Libya
Mauritania
Nigeria
Ivory Coast
Congo
Angola
Note: Subsea Service
Bases Added as Market
Needs Arise
Subsea Service Center hub
Remote Support
4/23/2014
XT Refurbishment Success 2014
South Africa
• Supporting approximate 400 installed XT’s
FMC Service Base
Customer Provided facilities
33
New Facilities to increase MMRS capacity
• Ågotnes
–
–
–
–
Workshop (OH/Resert.); 3277 m2
Machining centre; 1350 m2
Warehouse; 1450 m2
Office Building; 10607 m2; 363
Offices
–
Storage/Workshop (MMRS); 7000
m2
4/23/2014
XT Refurbishment Success 2014
4
–
Total: 23684 m2
–
Total investment: 600 mNOK
–
Completed in end of 2014 and
beginning 2015
SQDC - KEY PRIORITIES TO MAKE CUSTOMER SUCCESS
• SAFETY
- Safety will always be 1. priority
» CS ER had 0 LTI and 0 HRI in 2013, based on all onshore and offshore activities
performed in ER
• QUALITY
- Quality is important for our Customers
» CS ER had 98,2% uptime in 2013, based on 57500 hours on rig/vessels where FMC is
directly exposed to downtime
• DELIVERY
- OTD gives predictability for our Customers
» CS ER was good in mob of of equipment for operations
» Needed to improve on performance of complex MMR activities
• COST
- Cost is the end product of the above performance
+ Suppliers Cost
4/23/2014
XT Refurbishment Success 2014
5
Suppliers – An important contribution to reduce cost
•
•
•
•
Frame agreement with key suppliers
Long term relationship
Apply to FMC and Operator’s requirements
Approx. 50% of this volume performed within Hordaland
4/23/2014
XT Refurbishment Success 2014
6
”Lean” to improve on performance of complex MMR activities
DISASSEMBLY/
INSPECTION
BID
PURCHASE
SERVICES
PLAN
PURCHASE
PARTS
4/23/2014
XT Refurbishment Success 2014
7
ASSEMBLY/
TEST
DOC & CLOSE
Methodology
• Thorough analyses – fact basis, common understanding – before
jumping to solutions
• Value stream focus – LEAN in all elements!
• Test/experimenting solutions before rewriting all processes
• Key factors



4/23/2014
Ensure a common understanding of the situation and the problems we need to solve
Mobilise support in the development of solutions
Agree on how to move forward
XT Refurbishment Success 2014
8
STRUCTURED APPROACH
• To understand what the problems really were and secure efficient
improvement, we had a structured approach to analyzing the
issues and designing the solutions
4/23/2014
XT Refurbishment Success 2014
9
Creating pull and close daily coordination is critical to ensure
success in the flow
Purchasing
department
Pull
Key principles for efficient
flow:
Pull
(parts and services)
• Customer orientation
everywhere
Engineering
Pull
(documentation)
QA
• Simple and transparent
flow
• Pull at every step
• Level production
other
4/23/2014
Workshop
XT Assembly
Witeboard or
screens creating
transparency of
status of the project
at a glance
XT Refurbishment Success 2014
Coordination/
communications/
issue resolution
10
• Standards and zero
defects
Example from the purchasing process
– simplifying the upfront documentation process
Approval Process Products
Supplier
Phase
Send SMDR/
ITP
Send
procedures
Yes
SD
In SAP?
Put in SAP
SMDR team
No
Produce
In SAP?
Yes
Transmittal and
DR4-form to
supplier
Route in to
mail
ITP, SMDR ok, and need for procedures?
Route in to
mail
No
SMDRCoordination
SMDR
meeting
preparation
SMDR
meeting
Put in SAP
Route in to
mail
SMDRCoordination
SMDR
meeting
preparation
SMDR
meeting
Engineering
SMDR team
Verification
Review
Engineering
Kongsberg
Yes
Reuse
procedure in
SAP?
No
QA
Support
Kongsberg
ITP/NDT in
SAP
4/23/2014
XT Refurbishment Success 2014
Yes
No
Product
Engineer
Support
Verification
Review
11
Example from the torque process
The torque process steps - before
WS
MA
The torque process steps - after
Order slot time
at torque
Mount XT with
extra tools
Order slot time
at torque
Unscrew torus
connector
Order slot time
at torque
Disassemble
THOM
Transport
Transport
Transport
Transport
Transport
Transport
Building 2 Break torus
Unscrew
torus
connector
Break and disassemble
THOM
Break torus
connector
connector
Mount XT
with extra
tools
Order slot
time at
torque
Disassembl
e THOM
Transport
Transport
Break and disassemble
THOM
Results in number of days
15
OH82
OH20
4/23/2014
2
5
1 3
XT Refurbishment Success 2014
12
20
-85%
Key lessons learned
• Holistic approach is key: Look at the full process, seeking the root
causes
• Broad involvement is critical to succeed
• Applying a overall process perspective is difficult when the organization
is used to operating within discipline-oriented departments
• Unique opportunity to increase employee involvement and satisfaction
• It takes time to make the changes sustainable
• Challenging the way “we’ve always done things” reveals large potentials
4/23/2014
XT Refurbishment Success 2014
13