RT 6.5 – RT 75 SAMPLE SPLITTERS SAMPLE DIVIDING

SAMPLE DIVIDING
RT 6.5 – RT 75 SAMPLE SPLITTERS
SAMPLE DIVIDING
RETSCH sample splitters are used for the simple
dividing and reduction of bulk materials of all
kinds.
Sample Splitters are ideal for the on-site reduction of sample material. They are easy to use,
easy to clean and do not need an electrical
power supply.
In every dividing operation, the feed material is
halved. This process can be repeated as many
times as necessary, as a function of grain size,
until the quantity needed for transport or
examination purposes has been obtained. The
feed grain size up to a maximum of 50 mm
and the feed quantities depend on the relevant
type.
ADVANTAGES
Dividing without major expenditure of time
Simple and quick to clean
Usable in the laboratory and on site
Dividing process to DIN 51701, Part 4
High-precision manual dividing process
Inexpensive
PERFORMANCE FEATURES
application:
feed stock:
Number of dividing quantities:
feed size:
Vessel volume:
Sample dividing
Bulk materials
2
max. 50 mm (type RT 75)
2 x 2.5 / 2 x 8 litres
SAMPLE DIVIDING
RETSCH SAMPLE SPLITTERS
ARE AVAILABLE IN 6 SIZES.
The choice of unit will depend on the feed size
and sample quantity. Because of the volume of
the two collecting dishes, in the smaller types
RT 6.5 and 12.5 the maximum feed quantity is
about 5 litres and in the larger types RT 25 –
75 about 16 litres.
Fraction of max. grain size
Grain size factor
Depending on the grain size, material and grain
size distribution, the opening width of the passages should be 1.5 – 3.5 times greater than
the diameter of the largest grain (grain size
factor).
RT TECHNOLOGY
95 à 100 % 60 à 80 % 40 à 60 % 20 à 30 % 5 à 10 %
3,5
3
2,5
2
1,5
REFERENCES
SAMPLE SPLITTERS TYPE RT 6.5 AND TYPE RT 12.5
REFERENCE
(incl. 3 collecting dishes, 2.5 litres, of tin plate, stand of painted sheet steel and dividing head of stainless steel)
Sample splitter type RT 6.5
Sample splitter type RT 12.5
with 12 passages
with 18 passages
6.3 mm
12.5 mm
SAMPLE SPLITTER TYPE RT 25, 37.5, RT 50 AND RT 75
40.610.0001
40.610.0002
ARTICLE NO.
(incl. 3 collecting dishes, 8 litres, stand and dividing head of hot-dip galvanized sheet steel)
Sample splitter type RT 25
Sample splitter type RT 37.5
Sample splitter type RT 50
Sample splitter type RT 75
with 16 passages
with 12 passages
with 8 passages
with 6 passages
25.0 mm
37.5 mm
50.0 mm
75.0 mm
40.610.0003
40.610.0004
40.610.0005
40.610.0006
With sample splitters the feed material is poured
with one of the dishes evenly distributed into
the dividing head. The material runs through
the alternately arranged passages in the opposite direction into the two collecting dishes
standing under the dividing head outlets. With
every operation the feed sample is halved. This
can be repeated as many times as necessary
until the required dividing quantity has been
obtained. The dividing head of the types
RT 6.5 and 12.5 is made of stainless steel, the
stand is of painted sheet steel and the collecting dishes of tin plate.
In the types RT 25, 37.5, 50 and 75, the dividing head, frame and collecting dishes are of
hot-dip galvanized sheet steel. Thanks to the
open design, the sample splitters are especially
easy to clean.
SPARE PARTS
Spare collecting dish 2.5 litres (for type RT 6.5 and type RT 12.5)
Spare collecting dish 8 litres (for type RT 25, RT 37.5, RT 50 and RT 75)
42.147.0001
42.147.0002
DIMENSIONS AND WEIGHTS
Types 6.5 + 12.5
Types 25 - 75
F. Kurt RETSCH GmbH & Co. KG
Rheinische Strasse 36 · D - 42781 Haan
POB 15 54 · D - 42759 Haan
Tel.:
+49 (0) 21 29 / 55 61- 0
Fax.: +49 (0) 21 29 / 87 02
E-Mail: info@Retsch.de
Internet: http://www.retsch.de
®
300 x 270 x 250 mm
approx. 3.5 kg
620 x 420 x 260 mm
approx. 12.5 kg
RETSCH offers a comprehensive line of equipment used to condition solid specimens for analysis. You need only request information on our
crushers, mills, specimen dividers, sieve shakers,
feeder chutes and cleaning and drying units. You
will receive complete literature gratis and with
no obligation.
Subject to technical modification
Copyright RETSCH
99.610.0001/E
Made in Germany 01/97