Safedrive 10/15 ® Drive system for non counter-balanced Industrial Doors

Safedrive® 10/15
Drive system for non counter-balanced Industrial Doors
• Three phase with 100Nm output torque and
15rpm output speed
• High precision worm drive gear box
• Horizontal or vertical mounting
• Safety brake incorporated
• Low level hand chain operation as standard
• Plug-connected digital control equipment
• Certified to BS EN 12453
Application
Approvals & Certification
The Safedrive® 10/15 is a specially
developed drive unit for powering
rolling shutter doors and grilles which
are not counter-balanced by springs
or other devices. A high precision
worm gearbox is used to ensure
smooth operation and a long life.
The gearbox incorporates a separate
safety brake meeting the anti-fallback
requirements for vertically lifting
doors, a digital limit mechanism
for precise control of the stopping
position and is provided with plug in
pre-wired control systems.
Using the Safedrive® 10/15
manufacturers can construct power
operated shutter doors and grilles
to meet the British and European
Standards for Industrial and
Commercial Doors.
The Drive units are type tested to:
BS EN 12453
BS EN 60335-1
BS EN 60335-2-103
TÜV NORD CERT GmbH
Installation
The Safedrive® 10/15 may be
installed with the motor axis either
horizontal or vertical*. The hand chain
operator is suitable for use in any
plane to optimise installation space.
The floating foot provided is suitable
for use as the roller end bearing itself
but it is recommended that the drive
is normally installed so the roller is
fitted between the bearings and the
drive restrained by a torque arm. Full
details available on request.
Reliability
The drive is designed, for a typical
door size, to have a life of more than
30,000 cycles.
* Motor down
Construction Product
Built in Safety Brake
Certificate of conformity according to:
BS EN 12604 / 12605
TÜV SÜD Industrieservice GmbH
Regulation CPR 305/2011
By using Safedrive® 10/15 it enables
the door manufacturer to meet
the required Construction Product
Regulations (CPR) and C.E. mark
their doors.
Control Panels
The Safedrive® 10/15 is compatible
with the following range of three
phase GfA digital control panels. All
control panels incorporate up/ down/
stop buttons and plug. For more
information on functionality please
see corresponding datasheets.
Commercial Ref.
Description
GE29590A
TS 959 three phase
GE29700S2A
TS 970 three phase
GE29710B
TS 971 three phase
GE29810B
TS 981 three phase
GA10/15RD
120mm
413mm
2
4
3
120mm
183mm
246mm
1
5
30mm
ø12.5mm
80mm
95mm
160mm
200mm
230mm
442mm
GA10/15RD
80mm
ø10mm
1. Gearbox with built in safety brake
Shaft Detail (nominal)
ø22mm
Hand Crank Option
D (mm)
H (mm)
B (mm)
30
33.3
8
D
B
2. Motor
3. Limit switches
4. Hand chain mechanism
H
5. Floating foot
253mm
Technical Specification
Model
GA10/15RD
Output torque
Nm
100
Output speed
rpm
15
Hollow shaft dia.
mm
30
Locking Torque
Nm
510
Safety brake approval number
TorFV 4/024
Motor power
kW
0.3
Supply voltage
V
3x400
Motor rated current
A
1.5
Supply fuse (slow blow)
A
10
Frequency
Hz
50
Max cycles per hour
H-1
20
Limit switch capacity
Turns
20
Weight
Kg
15.3
Max. hand override
Handcrank/Handchain
N
65/172
GfA ELEKTROMATEN UK Ltd
Unit 1, Titan Business Centre,
Spartan Close, Warwick, UK. CV34 6RR
Tel: (+44) 01926 452 452
Fax: (+44) 01926 336 417
Email: sales@gfa-elektromaten.co.uk
Company Reg. No. 1489927 V.A.T Reg. No. GB 307 3656 62 © 08.14
www.gfa-elektromaten.co.uk