WF22 Specifications Wall Forms®

Wall Forms® WF22
Cutoff Face Surface Mount, Round
revision 10/23/14 • kl_wf22_spec.pdf
Approvals:
Type:
Job:
Catalog number:
WF22
/
/
Fixture
Electrical Module
Finish
See page 2
Specifications
8D"
(219.1 mm)
10K"
(266.7 mm)
J-box in wall by others.
Cutoff Face
Surface Mount
Light distribution
Cutoff Face
/
Options
See page 2
Date:
Page: 1 of 2
Surface Mount: Die-cast, low copper (<0.6% Cu) aluminum alloy with
double side walls. Zinc plated steel mounting plate supplied for mounting
to standard 3" or 4" junction box.
Face Plate: Die-cast, low copper (<0.6% Cu) aluminum alloy with
vertical and horizontal double ribs covering the full hemisphere. Ribs
are minimum D" depth and F" thickness. Secures to housing with four
stainless steel captive socket head screws.
Cutoff Face: Solid upper half and solid lower half with vertical
light baffles.
Lens: Flat tempered glass, F" minimum thickness with internal sandblast.
Retained in face plate and sealed with a one-piece silicone gasket.
Socket: (HID): Porcelain medium base socket rated 4KV. (Fluorescent):
Plastic GX24q-3/GX24q-4 base socket.
Ballast: All components mounted on housing. (HID): Reactor - High
power factor with starting temperatures of -40°F. for HPS and -20°F. for
PMH lamp modes. For PMH/120 volt, a step-up transformer is provided.
For HPS/277 volt, a step-down transformer is provided. For PMH and
HPS/347 volt, a step-down transformer is provided. (Fluorescent):
Encapsulated with thermal cutoff. Electronic with multi-voltage (108V
to 305V) input, 50/60 HZ, High power factor with starting temperatures
of -0°F.
Finish: Each luminaire receives a fade and abrasion resistant,
electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC)
polyester powdercoat finish. Standard colors include (BL) Black, (DB)
Dark Bronze, (WH) White, (PS) Platinum Silver, (SG) Stealth Gray, (LG)
Light Gray, and (CC) Custom Color (Include RAL#).
Finishing Items: Electrical modules and face plates. Each set of
finishing items shall be in one container, clearly marked with the fixture
catalog number.
Caution: Fixtures must be grounded in accordance with national,
state, and/or local electrical codes. Failure to do so may result in serious
personal injury.
Listings and Ratings
ETL1 to UL Standards 1598 & 8750
1
U.S. PATENTS: D385,054, D381,452, D378,621
IP66 Rated
CE
Suitable for wet locations
25C Ambient
KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.
© 2014 KIM LIGHTING INC. • 16555 EAST GALE AVENUE, City of Industry, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716
Wall Forms® WF22
Cutoff Face Surface Mount, Round
revision 10/23/14 • kl_wf22_spec.pdf
Type:
Job:
Page: 2 of 2
Standard Features
Fixture£
Cat. No. WF22
Electrical Module
HPS=High Pressure Sodium
PMH = Pulse Start Metal
Halide
PL=Compact Fluorescent
Cat. Nos. for Electrical Modules available:
LampLamp Line
Watts Type Volts
70 PMH277
For PMH, HPS and PL.
High Pressure Sodium
l 50HPS120
l 70HPS120
l 50HPS277
l 70HPS277
l 50HPS347
l 70HPS347
Lamp ED-17, Clear
Socket Medium Base1
ANSI BallastS68
Type
ED-17, Clear
Medium Base1
S62
Pulse Start Metal Halide
l 50PMH120
l 50PMH277
l 50PMH347
l 70PMH120
l 70PMH277
l 70PMH347
ED-17, Clear
Medium Base1
M110
ED-17, Clear
Medium Base1
M98
Compact Fluorescent
l 42PL2
Lamp Compact Fluor.
Socket GX24q-4 Base
All surface mount fixtures use reactor ballasts.
1
42PL operates 26, 32, and 42 watt lamps at 120 thru 277 volts (50-60 Hz.)
2
Finish
TGIC powder coat
Color:
Black Dark Bronze Light Gray Stealth Gray Platinum Silver White Custom Colors3
Cat. No.: l BL l DB
l LG
l SG
l PS
l WH l CC
Custom colors subject to additional charges, minimum quantities and extended lead times.
Consult representative. Custom color description:
3
Optional Features
Fusing
Cat. No. l SF
l No Option
Single Fusing for 120V, 277V, and 347V primary.
© 2014 KIM LIGHTING INC. • 16555 EAST GALE AVENUE, City of Industry, CA 91745-1788 • TEL: 626/968-5666 • FAX: 626/968-5716