QorIQ LS1043A and LS1023A Communication Processors
Transcription
QorIQ LS1043A and LS1023A Communication Processors
QorIQ LS1 Processor Family QorIQ LS1043A and LS1023A Communication Processors Quad-core, 64-bit ARM-based processors designed for enterprise edge industrial and networking applications Overview The QorIQ LS1043A processor is Freescale’s first quad-core, 64-bit ARM®-based processor for embedded networking. The LS1023A (two core version) and the LS1043A (four core version) deliver greater than 10 Gbps of performance in a flexible I/O package supporting fanless designs. This SoC is purpose-built solution for small-form-factor networking and industrial Target Applications • Integrated Services Branch Routers applications with BOM optimizations for economic low layer PCB, lower cost power supply and • SDN & NFV Edge Platforms single clock design. • Industry 4.0 Gateways The QorIQ LS1043A delivers a next-generation performance boost over dual core ARM 32-bit • Industrial PLC & Control products such as the QorIQ LS1020A and the LS1024A processors. The LS1043A takes • Security Appliances ARM processing performance to the next level with up to 4x 1.5 GHz 64-bit processors and a large 1 MB L2 cache for the best CPU performance per watt in the value-tier line of QorIQ communications processors. This powerful CPU complex is coupled with the proven offload engines of the QorIQ Data Path Acceleration Architecture (DPAA) to deliver 10 Gbps performance with minimal CPU overhead. QorIQ LS1043 Processor Diagram QorIQ LS1043A Processor Block Block Diagram ARM® Cortex® A53 64b Cores 32KB I-cache 32KB D-cache 32-bit DDR3L/4 Memory Controller 1MB L2-cache Secure Boot CCI-400TM Coherency Fabric Trust Zone SMMU SMMU SMMU SMMU Power Management Parse, Classify, Distribute 1G 1G SD/eMMC PCIe® 1G 1G 1G 2x DUART, 6xLP UART DMA 1/10G PCIe PCIe Watchpoint Cross Trigger uQE QuadSPI Flash Real Time Debug Queue Manager SATA 3.0 Security v5.4 (XoR, CRC) IFC Flash Perf Monitor Trace Buffer Manager 4x 12C / SPI GPIO, FlexTimers, PWM 4-Lane 10GHz SERDES 3x USB 3.0 w/PHY Core Complex Basic Peripherals and Interconnect Accelerators and Memory Control Networking Elements QorIQ LS1043A Processor Features Features • Up to 4 ARM Cortex®-A53 cores Benefits • Best in class performance to power efficiency, engineered to deliver an estimated 15,000 CoreMarks®. • Total system power as low as 6 W for fan-less platform design • Leading Data Path Offload Engines • Free up valuable CPU cycles with the proven QorIQ Data Path Acceleration Architecture targeting 10 Gbps packet offload performance with hardware packet engines, queue and buffer management engines. • Integrated security engine, supporting Secure Boot and Trust Architecture • Based on the QorIQ SEC 5.5 hardware accelerated security engine, to provide in depth defense for customer applications • Rich connectivity and peripheral features, including PCI Express Gen 2, USB 3.0, SATA 3, IFC, QuadSPI • High versatility that enables support for 802.11ac modules and high bandwidth connectivity for ASICs, 4G/LTE, SATA and low-cost NAND/NOR Flash. Multiple USB 3.0 for redundant WAN fail over, storage and configuration. Advanced XFI, Quad SGMII and 2.5G Overclocked SGMII support for maximum Ethernet flexibility. • QUICC Engine • Proven BOM cost saving support required for legacy networking, industrial, building and factory protocols such as PROFIBUS, HDLC and TDM • Support for hardware-based virtualization • Enables partitioning of physical and virtual resources on LS1043A multicore parts for increased system flexibility •DDR3L/4 • DDR3L/4 First in its class to offer support for DDR4 memory, ensuring continued performance efficiency System Interfaces and Networking Complete Enablement, Rich Ecosystem The QorIQ LS1043A and LS1023A The rich ecosystem provided by the powerful communications processor includes a four- combination of Freescale’s strong legacy HDLC, TDM or Profibus support. lane, 10 GHz multi-protocol SerDes providing of networking expertise and ARM’s rapidly support for high-speed interfaces, including up growing development base delivers the best Core Complex to six Gigabit Ethernet ports with IEEE® 1588 of both worlds. All QorIQ LS series devices support, three DMA controlled PCI Express are supported by our extensive third-party generation 2.0 ports and a single SATA 3.0 ecosystem, the largest and most established port. The Ethernet interfaces are backed by in the communications market. In addition powerful packet processing engines called the vibrant, growing ARM ecosystem is the Data Path Acceleration Architecture supported including the Linaro™ not-for- which provides greater than 10 Gbps packet profit engineering organization and exciting parsing, classification and distribution along OpenDataPlane™ project which strives with hashing functions and even arbitrary to deliver open source, cross platform payload processing and in-line reassembly interoperability. Additionally, the QorIQ LS1043A processor continues the QorIQ legacy of I/O flexibility with up to 6x Gigabit interfaces, 3x PCIe interfaces, 3x USB 3.0 interfaces and integrated QUICC Engine for legacy glue-less ® The QorIQ LS1043A communications processor delivers the latest in energy efficiency and performance improvement of ARM Cortex-A53 64-bit processor technology. This new quad or dual core complex provides a generous 1MB L1 cache and a highly efficient 8 stage pipeline for maximum performance per watt. Coupled with the high performance CoreLink CCI-400 coherent interconnect and the SMMU units this LS1043 system also enables dedicated virtual machines with protected memory and dedicated I/O for maximum platform flexibility. or cryptographic processing. This powerful packet processing architecture frees up the quad 1.5 GHz ARM A53 cores for higher level, In conjunction with our expertise and worldwide support infrastructure, this broad value added tasks. ecosystem helps customers accelerate their The LS1043A processor also features triple from legacy Freescale devices, preserve USB 3.0 controllers with integrated PHY for investment costs and reduce time to market. migration from non-Freescale solutions and a variety of storage, WAN and configuration options. Additional interfaces include QuadSPI, IFC and support for SD/MMC. In addition, Serial IO includes quad I2C/SPI interfaces. For more information, visit freescale.com/QorIQ Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their respective owners. © 2014 Freescale Semiconductor, Inc. Document Number: LS1043AFS REV 1