What They Didn’t Tell You in Lean Training About Managing Change Tom Schulte
Transcription
What They Didn’t Tell You in Lean Training About Managing Change Tom Schulte
What They Didn’t Tell You in Lean Training About Managing Change Tom Schulte TS Consulting Presentation Topics: Understanding Kaizen Blitz The 3 Stages for a Successful Blitz Managing the Change Leader’s Planning & Implementation Materials The KAIZEN BLITZ The Vision / Idea Plan the Details Design the Plan Execute the Plan (BLITZ) The KAIZEN BLITZ What is it? “Kai” means “change” “Zen” means “good (for the better)” “Blitz” means “lightening fast” “Kaizen Blitz” is a Team-based intensive short-term project to improve a process The KAIZEN BLITZ When is it most effective? Work cell implementation Improving process flow (demand pull system) Setup time reduction 5S applications Inventory reduction Cycle time improvement Reduce non “value-added” activities To streamline parts, people and information movement within a process The KAIZEN BLITZ Who needs to be involved? Decision Makers / Approvers / Sponsors • General Manager – Department Manager – Supervisor Kaizen Team Leader / Facilitator (1) Core people from the Process Area including the “Process Owner” (3-5) Lean expert (1) Influential skeptic (1-?) Support Engineering, Trades, Production Control, etc. The KAIZEN BLITZ How do I organize the Blitz? Form and train a cross-functional team Establish project goals, boundaries & kaizen dates Define the “current state” by collecting baseline data (value stream or process maps) Create a “future state” map that will eliminate waste from the “current state” process Team designs a detailed plan for implementing changes needed to reach the “future state” Assure availability of key people involved with the process during the Blitz (Engineering, Trades, Purchasing, etc.) The KAIZEN BLITZ To ensure success you must . . . Have adequate resources to support this short term, high level of intensity Ensure the team is highly empowered & supported by all levels of management Be able to withstand disruption of the process in the Target Area for a few days Be able to give the Kaizen Team (nearly) immediate priority in all areas Develop a strong communication plan with the entire organization before, during, and after Keep people from sliding back into old habits The KAIZEN BLITZ What is involved in the “BLITZ”? PREPARATION BLITZ “EVENT” FOLLOW-UP The KAIZEN BLITZ PREPARATION Form and train a cross-functional Kaizen Team Goals and measurements are agreed upon and all details of Kaizen Blitz Event are planned Follow-up Action Plans are made Start date & duration of event are determined Materials are obtained & key support personal are made available Training, Communication, Reward & Recognition, & Logistical Action Plans are developed and begun The KAIZEN BLITZ BLITZ EVENT Action Plans are implemented in the Target area The new process begins after changes are made The outcomes are measured “Tweaking” is done as needed Outcomes are communicated to all involved and feedback and ideas for improvement are solicited End of day meeting held to report progress and to review & adjust the next days activities The KAIZEN BLITZ FOLLOW-UP Results of the implementation are observed and measured for an agreed upon period of time Results are communicated to all involved and feedback and ideas for improvement are solicited “Tweaking” is done as necessary Positive gains are “standardized” Reward / Recognition Celebration is carried out Gains are documented and final report is made to the “Sponsors” of the Blitz The KAIZEN BLITZ The Change Process CURRENT STATE THAWING TRANSITION DESIRED STATE RESHAPING REFREEZING Key Stakeholders for Successful Change SPONSORS CHANGE AGENTS TARGETS SPONSORS Understand the need for the change and help others design the “Future State” Acknowledge what people are experiencing and give them opportunity to express it Model a confident and constructive view of change Monitor and readjust priorities & allocate resources Hold Change Agents & the Targets accountable Change the reward / recognition system Show personal support – both public and private throughout the change Solicit feedback CHANGE AGENTS Understand the need for the change & the impact on all involved Exhibit leader behavior and create dissatisfaction with the “status quo” Involve the Targets in planning whenever possible Integrate the change into the culture Plan and/or implement the “communication”, “education & training” and “reward” strategies CHANGE AGENTS Provide time and opportunity to move from the “Current State” Modify time frames / resources as needed Manage the change resources Communicate the change clearly and CONSTANTLY TARGETS Successful Change begins with understanding the Targets of the change CHANGE brings RESISTANCE! Targets of Change MAY. . . Think first about what they have to give up, not what they’ll get Feel self conscious and ill at ease when confronted by change Feel alone even if everyone else is going through the change Only be able to handle so much change Be at different levels of readiness for change Be concerned that they don’t have enough skill or resources Try to go back to doing things the “right way” when the pressure is off You will hear them say . . . We don’t have time for this We’ve tried something like this before It’s impossible; it just won’t work It would have worked years ago, but not now We need to spend more time thinking about it It’s a good idea; it just won’t fit here It’s unrealistic; reality will kill it The company is doing fine already; who needs it? The union / engineers / shop / etc. won’t go for it I like it the way it is It will cause conflict / difficulty / chaos I don’t get the point of it Too many changes have been made already I just want to be left alone to do my job / my thing Reasons People Resist CURRENT STATE THAWING TRANSITION RESHAPING DESIRED STATE REFREEZING • See no need to change • It’s more work for me/us • It is more work • Too much effort for so little gain • Don’t believe organization can get through transition • Hidden “time bombs” • Change is a criticism of my past performance • Too high a cost for me/us • Don’t trust the Change Agents • Nobody asked my opinion • Don’t trust the Sponsors • Low personal reward • Too much disruption • The change is Irreversible • Doesn’t solve the problem • Can’t see it’s relevance to my/our work • Change not supported • Negative outcomes • Caused a loss of jobs • Loss of status for me Two Approaches To Making Change #1 The HAMMER approach THE HAMMER APPROACH TO CHANGE Decide what changes are necessary Dictate the required changes to “Targets” Expect compliance and go on Punish those who resist Two Approaches To Making Change #2 The PLAN & MANAGE approach PLANNING & MANAGING THE CHANGE PROCESS 1. Define the FUTURE STATE 2. Identify the Steps to Thaw, Shape & Refreeze 3. Design the Change Implementation Plan 4. Implement, Monitor & Support the Change Two Approaches To Making Change #2 The PLAN & MANAGE approach PLANNING & MANAGING THE CHANGE PROCESS An effective Communication Plan A useful Education & Training Plan A meaningful Reward & Celebration Plan Communication Plan CURRENT STATE THAWING Explain upfront why the change is necessary Validate the Current State Clearly define the Desired State Identify what is not going to change Focus on future positives TRANSITION RESHAPING Repeat the Desired State message again and again Provide information and answers in a variety of ways Create safe ways to express resistance Honor the old ways Bury the old ways DESIRED STATE REFREEZING Show the distance people have come Communicate positive results of Desired State Acknowledge the price they have paid Thank them for their efforts and the results Education & Training Plan CURRENT STATE THAWING Identify competencies and performance levels required in the Desired State Assess gap between current knowledge/skill level and desired level Plan training outlines and implementation process & schedule TRANSITION RESHAPING DESIRED STATE REFREEZING Carry out training plan on schedule Measure the performance levels Provide training about change and the change process Provide refresher courses as needed Tie training to the Desired State constantly and consistently Design curriculum for new hires and career development Reward & Recognition Plan CURRENT STATE THAWING Examine current performance measures Identify behaviors that are desired and need to be encouraged Develop new performance measures that support the Desired State TRANSITION RESHAPING DESIRED STATE REFREEZING Stop rewarding old ways and undesirable behaviors Recognize behaviors that support the Desired State Reward incremental steps toward new performance levels Reward achievement of new performance measurements Reward those who surface resistance by including them in the “Tweaking” Do not reward or ignore undesirable performance Penalize destructive behaviors The KAIZEN BLITZ The Team’s The “Planning Tools” are used Planning to help the Team plan all the details Tools for a successful Implementation MATERIALS & SUPPLIES NEEDED Things to consider! Any Special Hand Tools? Cleaning Supplies? Special Carts / Cabinets / Stools / Benches? Area Layouts - Drawings - Flowcharts? Flipcharts - Markers - Tape? Logbook - Follow Ticket - Inventory Sheet? Work Instructions - Procedures? Kanban Cards - Boards - Racks? Safety Equipment? Visual Signage / Markings? Product Inventory? Communication board? What is needed? When is it needed? Who is responsible for providing it? Date Complete MEASUREMENTS Things to consider! What are the "key" measurements we will track? What data is needed for those measurements? How will the data be acquired? How often will we acquire the data? Who's help is needed for acquiring the data? Who will be responsible for accurate data collection? Who will be responsible for providing the reports from the collected data? How will the reports look? How often will the results be reported? Who will the results be reported to? What method will be used to communicate results? How long will we continue to measure and report? OUTSIDE SUPPORT NEEDED Things to consider! Access to accurate Current / Historical Data? Procurement of new Machine - Tool - Equipment.? Changes to Machine / Tool / Fixture / Etc.? Physical or Floor Layout changes are needed? Changes to Production Schedule or Inventory? Movement of Machinery / Tables / Etc.? Electrical wiring needs / changes? Construction of any kind? Management support? Drawing / Design / Procedure updates? Painting / Floor or Wall changes? What is the need? Who can supply it? When is it needed? Who will arrange it? Date Complete COMMUNICATION PLAN Who must we communicate with before, during and/or after the Kaizen Blitz? (Line workers? Management? Blitz Team? Support personnel?) When must the communication happen? (Before/during/after the implementation? How often? Beginning of/during or end of the day/week/month?) What content must be included in the Communication? (Implementation update? Current challenges? Positive/negative results? Operator input/ideas? Performance reminders? Recognition? etc.) How will the content be communicated? (Special meeting? One on one? Visual boards? Newsletter? Included in the Training?, etc.) Who is responsible for planning & implementing the communication plan? Blitz Team member? Supervisor or other Management?) TRAINING PLAN What Knowledge or Skills are needed? What content must be included in the Training? Things to consider! Current state data - Future state data - Pertinent Lean method/tools - Kaizen goals Kaizen advantages - New work design details - Outcome expectations - Measurements used - Performance expectations - Kaizen Blitz events and schedule - Communication plans - New skill development - Cross training Who needs the Knowledge or Skill? Who will design & develop the Training Materials and Format? Who will teach it? When will it be delivered? Date Complete KAIZEN BLITZ It’s all about effective . . . PREPARATION BLITZ “EVENT” FOLLOW-UP ? ? What They Didn’t Tell You in Lean Training About Managing Change ? ? Tom Schulte TS Consulting