Wednesday, November 5 TIME ALMADEN BALLROOM ALMADEN 1

Wednesday, November 5
TIME
8:30 9:30am
ALMADEN BALLROOM
Keynote Address:
What Role Can Hardware Design Play in Cybersecurity?
Srinivas Devadas, Massachusetts Institute of Technology
TIME
9:30 10:00am
ALMADEN 1
ALMADEN 2
WINCHESTER
MARKET 1 & 2
Session 7C:
Design and CAD to
Enable 3D Integration
Designer Track 7D:
DFM for Extreme
Technology Nodes
Fast Track: Wednesday Regular Paper Presentations
10:30am Session 7A:
- 12:00pm Approximate and
Stochastic Circuits
Session 7B:
Cool Technologies
for Cool Chips
12:00 1:00pm
Lunch: Hyatt Hotel - Grand Hall
1:30 3:30pm
Embedded Tutorial 8A:
Automated and Quality-Driven
Requirement Engineering
Special Session 8B:
Pessimism Removal During
Timing Analysis
Session 8C:
Emulation, Modeling and
Simulation of Analog
Systems
Session 8D:
Advanced Placement
4:00 5:30pm
Special Session 9A:
Advances in Debug and
Formal Verification
Session 9B
Mathematical Methods for
Interconnect Modeling and Low
Power Design
Session 9C:
Software for Management
of Parallelism and Data
Integrity in Embedded
Systems
Session 9D:
Clock Network
Design and Timing
5:30 6:00pm
Networking Reception: Almaden Foyer
31
WEDNESDAY, NOVEMBER 5 - 8:30 - 9:30am
Role Can Hardware Design Play in Cybersecurity?
Keynote What
Srinivas Devadas - Massachusetts Institute of Technology
Room: Almaden Ballroom
Nary a day goes by without hearing about break-ins into software systems, with personal or confidential data being
compromised. Yet, as time goes on, we are trusting the cloud more and more to perform sensitive operations for us. emanding
more trust in software systems appears to be a recipe for disaster.
Can hardware rescue us? Suppose we only trust hardware manufacturers and cryptographers, and not system software
developers, application programmers, or other software vendors. It will be the hardware manufacturer’s job to produce a piece
of hardware that provides some security properties. The additional physical security that comes with hardware is a bonus;
however, there is still a leap of faith! We must trust that the hardware’s security guarantees really do take software out of
the loop.
This poses a challenging problem. Software that operates on our data is assumed to be curious or malicious. To make
matters worse, the cloud service provider can also be malicious and can run whatever program it wants on our data. How
can we ensure privacy of data despite the practically infinite number of malicious programs out there? In this talk, processor
architectures being developed in academia and industry will be described that are attempting to address cybersecurity and
privacy challenges through innovative hardware design.
Biography: Srinivas Devadas is the Webster Professor of Electrical Engineering and Computer Science at the Massachusetts Institute of Technology
(MIT). He received his MS and PhD from the Univ. of California, Berkeley in 1986 and 1988, respectively. He joined MIT in 1988 and served as Associate
Head of the Department of Electrical Engineering and Computer Science, with responsibility for Computer Science, from 2005 to 2011. Devadas’s
research interests span Computer-Aided Design (CAD), computer security and computer architecture. In CAD, his work on logic synthesis and power
estimation resulted in several best paper awards at the Design Automation Conference and in IEEE Transactions. Devadas was elected a Fellow of the
IEEE in 1999 for contributions to design automation. He received the IEEE Computer Society Technical Achievement Award in 2014 for inventing Physical
Unclonable Functions and single-chip secure processor architectures. Devadas’s work on hardware information flow tracking published in the 2004
ASPLOS received the ASPLOS Most Influential Paper Award in 2014.
32
FAST TRACK 9:30 - 10:00am - ROOM: ALMADEN BALLROOM Come see a mini preview of the presentations for the day.
WEDNESDAY, NOVEMBER 5 - 10:30am - 12:00pm
7A
Approximate and Stochastic Circuits
Room: Almaden 1
7B
Cool Technologies for Cool Chips
Room: Almaden 2
Moderators:
Sergio Bampi - Univ. Federal do Rio Grande do Sul
Iris Hui-Ru Jiang - National Chiao Tung Univ.
Moderators:
Ravishankar Rao - Synopsys, Inc.
Muhammad Shafique - Karlsruhe Institute of Technology
This session presents innovations in approximate and stochastic circuits. Approximate circuits allow precision to be trade-off for improvements in area,
delay and power. Stochastic circuits use random bitstreams to encode values
-- the value encoded is the probability any given bit of the stream is 1. The first
paper describes multi-level logic synthesis techniques for approximate circuits that
handle user-provided constraints on error magnitudes and frequency. The second
paper describes models for the error characteristics of approximate adders and
presents a new approximate adder design. The last paper offers an approach to
reduce the silicon area required to generate multiple stochastic bitstreams having
different probabilities.
Thermal management is critical to virtually all chips and electronic systems, from
mobile devices to supercomputers. The papers in this session present various
technologies for thermal modeling and management. The first paper proposes
a modeling framework for an integrated microfludic cooling and power delivery
system. The second paper deals with thermoelectric cooling and integrates a thermal
simulator with thermoelectric device models. The third paper improves the accuracy
of thermal measurements of integrated circuits by modeling thermal emissivity.
7A.1 Multi-Level Approximate Logic Synthesis
Under General Error Constraints
Jin Miao, Andreas Gerstlauer, Michael Orshansky - Univ. of Texas at Austin
7A.2 On Error Modeling and Analysis of Approximate Adders
Li Li - Synopsys, Inc., Inc.
Hai Zhou - Northwestern Univ.
7A.3 Generating Multiple Correlated Probabilities for
MUX-Based Stochastic Computing Architecture
Yili Ding, Yi Wu, Weikang Qian - Shanghai Jiao Tong Univ.
All speakers are denoted in bold | * ‑ denotes best paper candidate
7B.1 PowerCool: Simulation of Integrated Microfluidic Power
Generation in Bright Silicon MPSoCs
Arvind Sridhar - IBM Research and Ecole Polytechnique Fédérale de Lausanne
Mohamed M. Sabry - Ecole Polytechnique Fédérale de Lausanne
Patrick Ruch - IBM Research
David Atienza - Ecole Polytechnique Fédérale de Lausanne
Bruno Michel - IBM Research
7B.2 Workload Dependent Evaluation of Thin-Film Thermoelectric
Devices for On-Chip Cooling and Energy Harvesting
Sri Harsha Choday, Kon-Woo Kwon, Kaushik Roy - Purdue Univ.
7B.3 Fast and Accurate Emissivity and Absolute
Temperature Maps Measurement for Integrated Circuits
Hsueh-Ling Yu - Industrial Technology Research Institute
Yih-Lang Li - National Chiao Tung Univ.
Tzu-Yi Liao - GEL/ITRI
Tianchen Wang, Yiyu Shi - Missouri Univ. of Science and Technology
Shu-Fei Tsai - Industrial Technology Research Institute
33
WEDNESDAY, NOVEMBER 5 - 10:30am - 12:00pm
7C
Design and CAD to Enable 3D Integration
Room: Winchester
Moderators:
Hai Li - Univ. of Pittsburgh
Siddharth Garg - Univ. of Waterloo
This session focuses on the design and CAD skills for emerging vertical structures.
The first paper discusses a layout CAD flow for vertical channel devices. The second
paper talks how to efficiently integrate photonic ring resonators in the vertical
structure and alleviate the thermal issue. The third paper expands the discussion to
full chip power delivery network in 3D ICs.
7C.1 Efficient Layout Generation and Evaluation of
Vertical Channel Devices
Wei-Che Wang, Puneet Gupta - Univ. of California, Los Angeles
7C.2 Thermal-Aware Synthesis of Integrated Photonic Ring Resonators
Christopher Condrat - Calypto Design Systems, Inc.
Priyank Kalla, Steve Blair - Univ. of Utah
7C.3 Full Chip Impact Study of Power Delivery Network Designs in
Monolithic 3D ICs
Sandeep Kumar Samal - Georgia Institute of Technology
Kambiz Samadi, Pratyush Kamal, Yang Du - Qualcomm Technologies, Inc.
Sung Kyu Lim - Georgia Institute of Technology
All speakers are denoted in bold | * ‑ denotes best paper candidate
7D
Designer Track: DFM for Extreme
Technology Nodes
Room: Market 1 & 2
Moderator:
David Pan - Univ. of Texas at Austin
Organizer:
Frank Liu - IBM Research - Austin
As the technology approaches 10nm process nodes and beyond, complex Designfor-Manufacturability techniques and processes have to be adopted to ensure
the correctiveness and yield of the semiconductor product. In this designer track
session, three industrial presenters will describe the challenges and solutions from
different perspectives.
7D.1 Evolving Physical Design Paradigms in the Transition from 20/14
to 10nm Process Technology Nodes
Luigi Capodieci - GLOBALFOUNDRIES
7D.2 Design and Manufacturing Process Co-optimization
in Nano-Technology
Meng-Kai Hsu, Nitesh Katta, Tzu-Hen Lin, Yen-Hung Lin, King Ho Tam,
Chung-Hsing Wang - Taiwan Semiconductor Manufacturing Co., Ltd.
7D.3 Design and Technology Co-Optimization Near Single-Digit Nodes
Lars Liebmann, Rasit Topaloglu - IBM Corp.
34
WEDNESDAY, NOVEMBER 5 - 1:30 - 3:30pm
8A
Embedded Tutorial: Automated and
Quality-Driven Requirement Engineering
Room: Almaden 1
Moderator:
Robert Wille - Univ. of Bremen
Organizer:
Robert Wille - Univ. of Bremen
The design flow for complex safety critical systems starts way before the
implementation phase. A considerate amount of time is spent on extracting and
organizing requirements from several documents that are provided by the stakeholders
and customers. This process is called requirement engineering and usually carried
out manually thus far. Some software tools, in particular IBM Rational DOORS1, are
available that mainly focus on providing methods to organize requirements and link
them to artifacts of the design flow. Besides extracting and organizing requirements,
designers also link them to model elements, code blocks, and verification plans such
they can be traced during the implementation phase. In this tutorial, we present
(automatic) methods which ease this flow, i.e. (i) analysis schemes checking whether
requirements are indeed formulated according to proper guidelines, (ii) automatic
approaches for the extraction of requirements from customer specifications, and (iii)
verification methods that check the extracted requirements for consistency. Natural
language processing tools and formal methods are used for this purpose.
8A.1 Automated and Quality-Driven Requirement Engineering
Rolf Drechsler, Mathias Soeken, Robert Wille - Univ. of Bremen
All speakers are denoted in bold | * ‑ denotes best paper candidate
8B
Special Session: Pessimism Removal
During Timing Analysis
Room: Almaden 2
Moderator:
Jin Hu - IBM Corp.
Organizers:
Jin Hu - IBM Corp.
Debjit Sinha - IBM Corp.
Igor Keller - Cadence Design Systems, Inc.
Chirayu Amin - Intel Corp.
Static timing analysis is a key component of any integrated circuit (IC) chip designclosure flow, and is employed (i) to obtain bounds on the fastest (early) and slowest
(late) signal transition times for various timing tests and paths and (ii) drive various
physical synthesis and physical design optimizations. Growing chip design sizes
and complexities (e.g., increased number of clock domains, increased significance
of crosstalk coupling, voltage islands), as well as more complex and accurate timing
models (e.g., current source models) lead to longer timing analysis run-times, thereby
hindering designer productivity.
Trade-offs are naturally performed on timing model complexity to achieve practical
turnaround-times for chip static timing analysis. To margin against the ignored (or tradedoff or uncertain) modeling limitations that are not explicitly and accurately modeled in
the native timing models, early and late signal propagation delays (for both gates and
wires) are made further pessimistic by the addition of extra guard bands. While these
forced early-late splits provide the desired safety margins, applying the splits for the
full path of some timing test introduces excessive and undesired pessimism if the data
path shares an overlap with the clock path. Common path pessimism removal (CPPR)
attempts to remove this pessimism by tracing these potentially problematic paths and
discarding some of the early-late difference along the common sub-path. This session
will showcase the techniques and methods used by the top-performing contestants of
the TAU 2014 Timing Contest to perform CPPR.
8B.1 TAU 2014 Contest on Removing Common Path Pessimism during
Timing Analysis
Jin Hu, Debjit Sinha - IBM Corp.
Igor Keller - Cadence Design Systems, Inc.
8B.2 Common Path Pessimism Removal: An Industry Perspective
Vibhor Garg - Cadence Design Systems, Inc.
8B.3 Fast Path-Based Timing Analysis for CPPR
Tsung-Wei Huang, Pei-Ci Wu, Martin D.F. Wong
Univ. of Illinois at Urbana-Champaign
8B.4 iTimerC: Common Path Pessimism Removal Using Effective
Reduction Methods
Yu-Ming Yang, Yu-Wei Chang, Iris Hui-Ru Jiang - National Chiao Tung Univ.
8B.5 TKtimer: Fast & Accurate Clock Network Pessimism Removal
Christos Kalonakis, Charalampos Antoniadis, Panagiotis Giannakou,
Dimos Dioudis - Univ. of Thessaly
35
George Pinitas - Delft Univ. of Technology
George Stamoulis - Univ. of Thessaly
WEDNESDAY, NOVEMBER 5 - 1:30 - 3:30pm
8C
Emulation, Modeling and Simulation of
Analog Systems
Room: Winchester
Moderators:
Ting Mei - Sandia National Labs
Jaijeet Roychowdhury - Univ. of California, Berkeley
The first two papers present formulations for analysing the steady-state and
transient behavior of oscillatory systems. The third paper describes a technique
for embedding high-frequency nonidealities in a standard BSIM model using
measurement data. The final paper describes a technique for mapping behavioral
models of AMS systems onto FPGAs for fast emulation.
8C.1 A Novel Linear Algebra Method for the Determination of Periodic
Steady States of Nonlinear Oscillators
Haotian Liu, Kim Batselier, Ngai Wong - Univ. of Hong Kong
8C.2 A Unifying and Robust Method for Efficient Envelope-Following
Simulation of PWM/PFM DC-DC Converters
Ya Wang, Peng Li, Suming Lai - Texas A&M Univ.
8C.3 Large-Signal MOSFET Modeling Using Frequency-Domain
Nonlinear System Identification
Moning Zhang, Yang Tang, Zuochang Ye - Tsinghua Univ.
8C.4 Pragma-Based Floating-to-Fixed Point Conversion for the
Emulation of Analog Behavioral Models
Frank Austin Nothaft, Luis Fernandez, Stephen Cefali, Nishant Shah,
Luke Darnell, Jacob Rael - Broadcom Corp.
All speakers are denoted in bold | * ‑ denotes best paper candidate
8D
Advanced Placement
Room: Market 1 & 2
Moderators:
Ismail Bustany - Mentor Graphics Corporation
Martin D.F. Wong - Univ. of Illinois at Urbana-Champaign
In this session, we have four interesting papers on circuit placement. The first one
gives a Lagrangian Relaxation method to solve the asynchronous circuit placement
problem. The second one is on large scale FPGA packing and placement. The
third paper is placement for regularity. The last one is power clamp placement for
ESD protection.
*8D.1 Asynchronous Circuit Placement by Lagrangian Relaxation
Gang Wu, Tao Lin - Iowa State Univ.
Hsin-Ho Huang - Univ. of Southern California
Chris Chu - Iowa State Univ.
Peter Beerel - Univ. of Southern California
8D.2 Efficient and Effective Packing and Analytical Placement for
Large-Scale Heterogeneous FPGAs
Yu-Chen Chen - National Taiwan Univ.
Sheng-Yen Chen - National Chiao Tung Univ.
Yao-Wen Chang - National Taiwan Univ.
8D.3 A Hierarchical Approach for Generating Regular Floorplans
Javier De San Pedro, Jordi Cortadella, Antoni Roca Univ. Politècnica de Catalunya
8D.4 Planning and Placing Power Clamps for Effective CDM Protection
Hsin-Chun Lin - National Chiao Tung Univ. and Global Unichip Corp.
Shih-Ying Liu, Hung-Ming Chen - National Chiao Tung Univ.
36
WEDNESDAY, NOVEMBER 5 - 4:00 - 5:30pm
9A
Special Session: Advances in Debug and
Formal Verification
Room: Almaden 1
Moderator:
Yirng-An Chen - Marvell Semiconductor, Inc.
Organizer:
Miroslav Velev - Aries Design Automation, LLC
The four papers in the session present recent advances in debug and formal
verification. The first paper, entitled “On Application of Data Mining Methods
in Functional Debug,” investigates the use of data mining in functional debug of
microprocessors. The second paper, entitled “Improving the Efficiency of Automated
Debugging of Pipelined Microprocessors by Symmetry Breaking in Modular Schemes
for Boolean Encoding of Cardinality,” presents a method for symmetry breaking
when encoding cardinality constraints in debug of pipelined microprocessors that
are formally verified by Correspondence Checking and exploiting the property of
Positive Equality. The third paper, entitled “Multiple Clock Domain Synchronization in
a QBF-based Verification Environment,” introduces a novel framework for verifying
designs with multiple clocks using Quantified Boolean satisfiability (QBF). The fourth
paper, entitled “Probabilistic Model Checking for Comparative Analysis of Automated
Air Traffic Control System Configurations,” explores techniques for probabilistic
model checking of the Automated Airspace Concept (AAC) system.
9A.1 On Application of Data Mining in Functional Debug
Kuo-Kai Hsieh, Wen Chen, Li-C. Wang - Univ. of California, Santa Barbara
Jayanta Bhadra - Freescale Semiconductor, Inc.
9A.2 Improving the Efficiency of Automated Debugging of Pipelined
Microprocessors by Symmetry Breaking in Modular Schemes for
Boolean Encoding of Cardinality
Miroslav Velev, Ping Gao - Aries Design Automation, LLC
9A.3 Multiple Clock Domain Synchronization in a QBF-Based
Verification Environment
Djordje Maksimovic, Bao Le, Andreas Veneris - Univ. of Toronto
9A.4 Probabilistic Model Checking for Comparative Analysis of
Automated Air Traffic Control System
Yang Zhao - Microsoft Corp.
Kristin Yvonne Rozier - NASA
All speakers are denoted in bold | * ‑ denotes best paper candidate
9B
Mathematical Methods for Interconnect
Modeling and Low Power Design
Room: Almaden 2
Moderators:
Wenjian Yu - Tsinghua Univ.
Eli Chiprout - Intel Corp.
This session contains papers addressing mathematical methods in the areas
of interconnect modeling and low power design. The first paper develops a nonlinear
zonotoped macromodel for verifying high-speed I/O links under variations, able
to generate worst-case eye diagram parameters with small error and much faster
than Monte Carlo. The second paper addresses accurate parasitic extraction for
high-density cylindrical ITVs by efficient techniques based on the floating random
walk method, consuming much less memory than Monte Carlo methods. The third
paper presents a self-learning methodology leading to optimal configurations for
channel-adaptive process-resilient low-power MIMO front-ends.
9B.1 A Zonotoped Macromodeling for Reachability Verification of
Eye-Diagram in High-Speed I/O Links with Jitter
Sai Manoj PD, Hao Yu - Nanyang Technological Univ.
Chenji Gu, Cheng Zhuo - Intel Corp.
9B.2 Random Walk Based Capacitance Extraction for 3D ICs with
Cylindrical Inter-Tier-Vias
Wenjian Yu, Chao Zhang, Qing Wang - Tsinghua Univ.
Yiyu Shi - Missouri Univ. of Science and Technology
9B.3 Self-Learning MIMO-RF Receiver Systems: Process Resilient
Real-Time Adaptation to Channel Conditions for
Low Power Operation
Debashis Banerjee, Barry Muldrey - Georgia Institute of Technology
Shreyas Sen - Intel Corp.
Xian Wang, Abhijit Chatterjee - Georgia Institute of Technology
37
WEDNESDAY, NOVEMBER 5 - 4:00 - 5:30pm
9C
Software for Management of Parallelism and
Data Integrity in Embedded Systems
Room: Winchester
Moderator:
Jose Ayala - Complutense Univ. of Madrid
This session tackles the problem of managing the parallel execution and the data
integrity issues in embedded systems by means of novel software techniques. The
first paper proposes a context-switch-enabled pipelining approach for the synthesis
of data-parallel kernels. It formulates a scheduling problem for minimizing the
context-switching cost of the multithreaded pipeline with an exact formulation and
an efficient heuristic to solve the optimization problem. The second paper extends
previously proposed analytical modeling techniques in the field of floating-point
to fixed-point conversion to a larger class of programs. This approach extracts
a compact, graph-based representation of the program. Finally, it is presented a
warranty-aware page management design to mitigate the operation overhead
required for managing the endurance issue in PCM-based embedded systems.
9C.1 Multithreaded Pipeline Synthesis for Data-Parallel Kernels
Mingxing Tan - Cornell Univ.
Bin Liu - Micron Technology, Inc.
Steve Dai, Zhiru Zhang - Cornell Univ.
9C.2 Toward Scalable Source Level Accuracy Analysis for
Floating-Point to Fixed-Point Conversion
Gaël Deest - Univ. of Rennes 1
Tomofumi Yuki - INRIA
Olivier Sentieys - INRIA, Univ. of Rennes 1
Steven Derrien - Univ. of Rennes 1
9C.3 Warranty-Aware Page Management for PCM-Based
Embedded Systems
Sheng-Wei Cheng - National Taiwan Univ.
Yu-Fen Chang - National Tsing Hua Univ.
Yuan-Hao Chang - Academia Sinica
Hsin-Wen Wei - Tamkang Univ.
Wei-Kuan Shih - National Tsing Hua Univ.
All speakers are denoted in bold | * ‑ denotes best paper candidate
9D
Clock Network Design and Timing
Room: Market 1 & 2
Moderators:
Rajendra Panda - Oracle Corp.
Tao Huang - Synopsys, Inc., Inc.
Improving the accuracy of Static Timing Analysis (STA) through EDA advancements
in Common Path Pessimism Removal (CPPR), and improving the generation and
distribution of clocks through resonant clocking, are presented in this session. Two
types of resonant clocking, rotary and coupled LC, are featured in the first two
papers. An EDA solution to integrating CPPR into the STA flow for improved
accuracy is presented in the third paper.
9D.1 Frequency-Centric Resonant Rotary Clock
Distribution Network Design
Ying Teng, Baris Taskin - Drexel Univ.
9D.2 Opportunistic Through-Silicon-Via Inductor Utilization in
Resonant Clock: Concept and Algorithms
Umamaheswara Rao Tida - Missouri Univ. of Science and Technology
Varun Mittapalli - Missouri Univ. of Science and Technology
Cheng Zhuo - Intel Corp.
Yiyu Shi - Missouri Univ. of Science and Technology
9D.3 UI-Timer: An Ultra-Fast Clock Network Pessimism
Removal Algorithm
Tsung-Wei Huang, Pei-Ci Wu, Martin D.F. Wong Univ. of Illinois at Urbana-Champaign
38