NCS2-IXM407 Overview

NCS2-IXM407
4 ports 10G SFP+ NIC Module with
Intel® XL710 Ethernet Controller
Intel Ethernet Controller
PCIe Gen 3.0 x 8 gold finger
XL710 with heatsink
4 x 10GbE SFP+ ports
Overview
NCS2-IXM407 is a 4-port 10G NIC module with SFP+ Fiber connector. The NIC module can be installed onto FW-8896 network
appliance to expand the network connectivity to 4 x 10G network
capability.
Features
10 Times Faster by
High-Performance 10 GbE
The NCS2-IXM407 10 GbE NIC
module provides four SFP+ connectors which can connect 10G
SFP+ fiber Gigabit Ethernet.
Intel® XL710-AM1 10 GbE
Controller
The new Intel® XL710 Ethernet
Controller series aims to extend
virtualization capabilities and travels in PCIe Gen 3.0 x 8 connector
for optimized hardware acceleration.
Four SFP+ 10 GbE ports
This NIC module offers the expansion of 4 SFP+ 10GbE LAN
ports (using Intel XL710) to work
with fiber cabling, theoretical
maximum of 40 Gbps bi-directional throughput (20 Gbps in;20
Gbps out).
PCI ExpressTM 3.0 x8
NCS2-IXM407 comes with PCI
Express Gen 3 x8 golden fingers.
It can be inserted into PCIe 3.0
x8 NIC module slot of Lanner
network appliances but also
backward compatible with PCIe
Gen 2.1. The maximum interface
transfer rate of PCIe Gen 3 can
reach up to 8 GT/s bit rate.
Dimensions 196.1 x 77.2 x 39 mm
connect@lannerinc.com | www.lannerinc.com
Preliminary Specifications
PCB
IXM407
Chipset
Intel XL710
Interface
1 x PCIe Gen 3.0 x 8 gold finger
Connector
4 x SFP+ 10G ports
Switch
Temperature
N/A
Operating
0 ~ 40ºC
Storage
-40~70ºC
Cooling
Locking mechanism type heatsink
Humidity
5%~90% RH, Non-condensing
Physical Dimemsions
PCB: 194 x 75 mm
PCB Layer
8 Layers
Certifications
CE Class A, FCC Class A
Ordering Information
NCS2-IXM407
4 x 10 GbE SFP+ ports NIC module with Intel XL710
Compatible Lanner FW Network Appliances
Slim Module
FW-8771
FW-8877
FW-8896
NCS2-IXM407
Yes
Yes
Yes
V1.0.0
connect@lannerinc.com | www.lannerinc.com