matie odukt infor Pr www.bafa.nl

Produkt informatie
www.bafa.nl
FRATELLI PETTINAROLI SPA
109L
DESCRIPTION
109L
“Domignon” thermostatic head with liquid sensor incorporated
with temperature locking device, for all Pettinaroli thermostatic
valves.
The actuator is compliant to EN 215 standard when mounted on
760P (DN10, DN15) or 761P (DN10, DN15) valves.
Ø 44
85
DIMENSIONS
MATERIALS
FULL RANGE
House parts
ABS
106CN
Wax sensor
Thermostatic sen
sensor
Liquid
107L
Liquid sensor – EN 215 n°49 certified
Spring
AISI 302
107LHN
Liquid sensor, for Heimeier connection
Ring nut
CW614N (DIN 50930
part.6) CuZn39Pb3
107LR
Liquid sensor with anti theft device. EN 215
n°49 certified
Internal components
POM thermoplastic
107LOD
Inner locking ring
PP plastic
Liquid sensor, for Danfoss connection or similar
107LD
Embedding remote liquid sensor, regulator
incorporated
107LKIT
107LKIT
Embedding remote liquid sensor
107LCRO
107L chrome plated
108L
Liquid sensor - EN 215 n°49 certified
109L
Liquid sensor - EN 215 n°49 certified
APPROVAL
APPROVAL
Certificate EN 215 n°49
Via Pianelli,38 - 28017 S.Maurizio d’Opaglio (NO) ITALY Tel. +39 0322 96217 - Fax. +39 0322 96546 - www.pettinaroli.com
STE0001 R3 – 08/07/2014
www.bafa.nl
TECHNICAL SPECIFICATION
TECHNICAL DATA
109L
The following technical details refer to the actuator mounted on
760P (DN10, DN15) and 761P (DN10, DN15) valves.
Max. differential pressure
0.8 bar
Differential pressure influence (D)
0.25K
Liquid sensor hysteresis (C)
0.45K
Flow temperature
temperature influence (W)
0.80K
Response time (Z)
30 minutes
Nominal flow rate (qmN)
175 Kg/h
Max temperature
110°C
7°C min. setting of the temperature selector
INSTALLATION INSTRUCTIONS
INSTRUCTIONS
Via Pianelli,38 - 28017 S.Maurizio d’Opaglio (NO) ITALY Tel. +39 0322 96217 - Fax. +39 0322 96546 - www.pettinaroli.com
STE0001 R3 – 08/07/2014
www.bafa.nl
TECHNICAL SPECIFICATION
109L
The flow direction has to be in accordance with the arrow
on the valve body. The suggested thermostatic head installation is the horizontal position;
1. turn the head into position “open”
2. insert the hexagon (1) of the headwork into the
thermostatic head
3. screw the nut (2).
4. block the temperature, as described below
5. install the two half rings (3 e 4) for the temperature blockage
During summer time it is advisable to set the thermostatic
head to completely open position.
The head is provided with the locking stops in neutral
position, to allow the free turn of the temperature handle.
To block the temperature to a prefixed value, follow the
steps as shown into the figure:
1. turn the head into close position and extract the
first red stop (3)
2. turn the head into open position and extract the
second red stop (2)
3. turn the head into the desired position (1)
4. push the temperature locking stops under the
handle (2 and 3)
To block the temperature to a prefixed range, follow the
steps as shown into the figure :
1. turn the head into close position and extract the
first red stop
2. turn the head into open position and extract the
second red stop
3. turn the head to the desired position for the maximum temperature (in figure the position with 3
points)
4. push the first temperature locking stop under the
handle (2)
5. turn the head to the desired position for the minimum temperature (in figure the position with 1
point)
6. push the second temperature locking stop under
the handle (4)
STE0001 R3 – 08/07/2014
www.bafa.nl
TECHNICAL SPECIFICATION
Via Pianelli,38 - 28017 S.Maurizio d’Opaglio (NO) ITALY Tel. +39 0322 96217 - Fax. +39 0322 96546 - www.pettinaroli.com