Plug and Play with Phoenix Contact’s Highly Compact MINI Pro

Transcription

Plug and Play with Phoenix Contact’s Highly Compact MINI Pro
US Headquarters
1000 N. Main Street, Mansfield, TX 76063, USA
(817) 804-3800 Main
www.mouser.com
New Product Announcement
Plug and Play with Phoenix Contact’s Highly Compact MINI Pro
Signal Conditioners Now at Mouser
November 17, 2014 – Mouser Electronics, Inc. is now stocking MINI Pro Signal Conditioners from
Phoenix Contact. Designed as one of the first families of isolation amplifiers in a 6.2mm width, these
Mini Pro Signal Conditioners from Phoenix Contact offer easy installation and startup in a confined
space for use in isolation, conversion, filtering or amplification of analog signals. These conditioners
use the latest pluggable connection and transmission technology, and provide safe electrical isolation
with a 3 kV test voltage range. Since the MINI Pro Signal Conditioners measure just 6.2 mm wide, they
require up to 65 percent less space over traditional signal conditioner designs.
The Phoenix Contact MINI Pro Signal Conditioners, available from Mouser Electronics, feature
multiple configuration options, including easy setup with DIP switches, extended configuration using PC
software, or simple configuration using an Android app. This flexibility makes it extremely simple for
engineers to configure the signal conditioners even without printed data sheets.
All devices within the family are designed for fast installation and ease of use. The Phoenix
Contact MINI Pro Signal Conditioners feature FASTCON Pro plug-in connection terminal blocks, easy
to access terminal points, and power bridging using a mounting rail bus connector. Each connection
and operating element is accessible from the front. Wiring can be accomplished in any order using
through screw-type connectors or push-in technology with no special tools. Optimum signal quality is
achieved using the latest switching technology paired with safe electrical isolation between input, output
and supply. These devices operate over an extended supply voltage range from 9.6V to 30V DC, and
have a broad operating temperature range from -40°C to +70°C.
Large labeling areas offer ample space for complete loop marking, and status LEDs in every
isolation amplifier ensure quick and continuous diagnosis. Only one measurement is needed to capture
an entire current loop from sensor to controller without isolating the loop, and signal and supply circuits
can be quickly interrupted during startup and service using the built-in isolation functionality.
The Phoenix Contact MINI Pro Signal Conditioner products include interface modules, power
distribution modules, monitoring modules and signal conditioners/converters. All products within the
family are well-suited for a variety of industrial applications.
To learn more, visit:
http://www.mouser.com/new/Phoenix-Contact/phoenix-contact-mini-pro-conditioners/.
– continued –
Mouser / Phoenix Contact Mini Pro
Page Two
With its broad product line and unsurpassed customer service, Mouser caters to design engineers
and buyers by delivering What’s Next in advanced technologies. Mouser offers customers 20 global support
locations and stocks the world’s widest selection of the latest semiconductors and electronic components for
the newest design projects. Mouser Electronics’ website is updated daily and searches more than 10 million
products to locate over 4 million orderable part numbers available for easy online purchase. Mouser.com
also houses an industry-first interactive catalog, data sheets, supplier-specific reference designs, application
notes, technical design information, and engineering tools.
About Mouser Electronics
Mouser Electronics, a subsidiary of TTI, Inc., is part of Warren Buffett's Berkshire Hathaway family of
companies. Mouser is an award-winning, authorized semiconductor and electronic component distributor,
focused on the rapid introduction of new products and technologies to electronic design engineers and
buyers. Mouser.com features more than 4 million products online from more than 500 manufacturers.
Mouser publishes multiple catalogs per year providing designers with up-to-date data on the components
now available for the next generation of electronic devices. Mouser ships globally to over 400,000 customers
in 170 countries from its 492,000 sq. ft. state-of-the-art facility south of Dallas, Texas. For more information,
visit http://www.mouser.com.
About Phoenix Contact
Phoenix Contact is a worldwide leader in the development and manufacture of electrical connection,
electrical interface, and industrial automation technology solutions. A global company founded in 1923 with
the U.S. headquarters in Pennsylvania, Phoenix Contact has developed a strong industry presence in
innovative products and processes through its wide product range. Components offered include sensor,
controller, modular terminal block (invented by Phoenix Contact in 1928), splash proof machine connector,
and wireless Ethernet products.
Trademarks
Mouser and Mouser Electronics are registered trademarks of Mouser Electronics, Inc. All other products,
logos, and company names mentioned herein may be trademarks of their respective owners.
– 30 –
Further information, contact:
Kevin Hess, Mouser Electronics
Vice President Technical Marketing
(817) 804-3833
Kevin.Hess@mouser.com
For press inquiries, contact:
Kelly DeGarmo, Mouser Electronics
Corporate Communications Manager
(817) 804-7764
Kelly.DeGarmo@mouser.com