F L A R E - IO Industries

FLARE
2KSDI
Small and Mighty
2KSDI
With it’s thick milled aluminum case, the 2KSDI is built tough. To prevent points of failure, the camera has no knobs or buttons on the case itself.
Though it is usually needed for operation of other pro mini-cameras, the 2KSDI does not require a camera control unit. The camera can be controlled
via handheld remote, serial connection, or can be set into autonomous operation. These features work together to accomplish maximum usability in
a minimal size.
No CCU Required:
Enable the OSD overlay on the
1st output using the optional
handheld remote. The 2nd
output stays clean for applications where a seperate feed
without OSD is needed.
Mount it Anywhere:
Centered mounting points
surround 4 sides of the
camera body. This design
allows for the mounting of the
camera from any angle.
Specifications
2KSDI
Imaging
Sensor Type
• Electronic Global Shutter CMOS
Active Sensor Area
• 2/3” , 11.264 x 5.94 mm, 5.5µm square pixels
Image Type
Color Control
Luma Control
• 4:2:2 (YCbCr), 4:4:4 (RGB), RAW (Bayer)
• Full color matrix, with RGB offsets and saturation
• Automatic white balance
• Tracking white balance with adjustable speeds
• Separate full gamma, black gamma adjustment
• Master pedestal level offset
• White clipping offset with adjustable knee function
Exposure Control
• Shutter angle (in 1/8th degree increments)
• Fractional shutter time
• Fine tune mode (microseconds)
Control Interface
• RS-485 up to 300m
• Handheld remote, OSD on SDI1
• Open command set, PC control software
Synchonization
• Reference input BNC connector
• 3G/HD-SDI modes require Tri-Level reference input
Output
HD-SDI Output Modes
• 720p 10bit 4:2:2/RAW:
• 1080p 10bit 4:2:2/RAW:
• 1080i 10bit 4:2:2/RAW:
• 2K 10bit 4:2:2/RAW:
50, 59.94, 60
23.98, 24, 25, 29.97, 30
50, 59.94, 60
23.98, 24, 25, 29.97, 30
3G-SDI Output Modes
• 1080p 10bit 4:2:2/RAW:
• 1080p 10bit 4:4:4:
• 2K 10bit 4:2:2/RAW:
• 2K 10bit 4:4:4:
50, 59.94, 60
23.98, 24, 25, 29.97, 30
47.95, 48, 50, 59.94, 60
23.98, 24, 25, 29.97, 30
Mechanical/Electrical
Housing
• Size: 63.5 x 63.5 x 44.1 mm
• Weight: 310g
• Material: Milled aluminum
Power Requirements
• AC Range: 100 - 240VAC (using AC adapter)
• DC Range: 10 - 19VDC (on power hirose)
• Consumption: 4.5W maximum
Lens Selection
2KSDI
Image Crop at Different Resolutions
Resolution
Image Diameter
m
7m
2048 x 1080
12.
1920 x 1080
12.
m
1m
mm
8.1
1280 x 720
Native C-Mount Lens Adaper
Lens Format
≥1 inch recommended
≥1 inch recommended,
or generous 2/3 inch
≥1/2 inch recommended
Sensor Comparison
Adapters for:
• Active EF/EF-S
• Passive F-mount
• B4-mount
• PL-mount
• Call for others
35mm Full Frame
Format
35mm Full Frame
Super-35 Film
Super-35 Film
Standard C-Mount Lens Optical Formats
m
16m
Crop Factor
3.15 : 1
2.25 : 1
1 inch
2KSDI
Shown with Fujinon lens using
C-mount to B4 adapter
The 2KSDI shown with the
back-focus adjustable standard
C-mount, which screws inside
of an M42 threading.
Shown with Zeiss lens using
C-mount to EF/EF-S adapter
m
11m
2/3 inch
m
8m
1/2 inch
Shown with Kowa 5mm on
native C-mount
Accessories
2KSDI
The 2KSDI Kit (P/N: 2KSDIKITxx)
P/N: 2KSDI
• Camera head
P/N: FLARESDIRMT
• Handheld remote
• Controls OSD
P/N: CABFLAREBATT
• Power/control cable
• Lemo, D-Tap, Hirose
P/N: ACPWRTAPxx
• AC-DC adapter
• xx = NA, EU, UK
P/N: CABUSB4852M
• 2m USB control cable
• Other lengths available
EF/EF-S Lens Control (P/N: FLARE2K-EFKIT)
Other Accessories
P/N: ADAPTER-C2EF
• C-mount adapter
P/N: CABFLAREBATT2
• Power/control cable
The 2KSDI is capable of controlling both focus and
aperture functions on different manufacturers of
EF/EF-S lenses. The attached lens can be
controlled through the RS485 connection to the
camera, or using the handheld remote with OSD
on SDI1 output.
P/N: CABLEMO3M
• 3m RS485 extender
P/N: FLARE-EF
• Interface adapter
P/N: FLARE24MT-EF
• Tripod mount spacer
P/N: FLAREPWRHR
• Power Hirose
IO Industries Inc.
12-1510 Woodcock St.
London, ON N6H 5S1
CANADA
Em. sales@ioindustries.com
Ph. 1 (519) 663-9570
www.ioindustries.com/ProVideo