SAC/EOI/07/2014-15 dt:26-11-2014

Transcription

भारत सरकार
अंत�रक �वभाग
अंत�रक उपयोग क��(इसरो)
आंबावाड� �वस्ता पी.ओ.
अहमदाबाद – 380 015 (भारत)
दरू भाषः +91-79-2691 3051/98
फैक् नं. : +91-79-2691 5835/02/48
Government of India
Department of Space
SPACE APPLICATIONS CENTRE (ISRO)
Ambawadi Vistar P.O.
Ahmedabad – 380 015 (INDIA)
Telephone : +91-79 – 2691 3051/98
Fax No. : +91-79 – 2691 5835 / 02 /48
Email: publictender@sac.isro.gov.in
Tender Notice No: SAC/EOI/07/2014-15
Dt.: 26-11-2014
EXPRESSION OF INTEREST (EOI)
For and on behalf of the President of India, Sr. Head, Purchase & Stores, Space
Applications Centre, Ahmedabad invites Expression of Interest (EOI) from capable
vendors for Design, Development and Testing of Space Qualified CCD Clock Driver
Devices (Global).
Interested parties may download the documents attached hereunder and submit
detailed response to the undersigned on or before due date and time i.e. 29-12-2014
(15.00 Hrs. IST) in sealed cover. While submitting your EOI, super-scribe above
mentioned tender notice No., and due date on the envelope.
In the event the due date indicated is declared as holiday, the next working day at
SAC shall be considered as the due date for receiving & opening of responses.
Late/Delayed responses will not be accepted. No request for extension of due date
shall be entertained. For any clarifications, queries can be addressed in writing to:
Sr. Purchase & Stores Officer, (email: publictender@sac.isro.gov.in), reference
no. of this notice should be indicated in all correspondence.
As ISRO has implemented e-tendering, the commercial bids after completion of
technical assessment may be invited through online tender. For this purpose the
interested parties must register themselves on ISRO e-procurement portal
www.eprocure.isro.gov.in and also apply for empanelment as authorized vendors
for Space Applications Centre. Detailed instructions in this regard are available on
the portal.
S/d
Sr. Head, Purchase & Stores
अिभरुिचक� अिभव्य�� ह ेतु
आवेद के िलए अनुरोध
Request for Expression of Interest (REoI)
सीसीड� क्लॉक �ाइवर उपकर
CCD Clock Driver Devices (Global)
अंत�रक्ष उपयोगक� (सैक), भारतीय अंत�रक्ष अनुसंधान संगठ (इसरो), भारत सरकार
शांितपूण्र उ� ेश्य� किलए अंत�रक्ष �वज्ञान एवं �ौ�ोिगक� के उपयोग हेतु नीतभार� के �वकास
कायर् करता ह ै। इस स ंबंध म, आवश्यकता दस्तावेजम� उ�ल्ल�खत चाजर् यु�ग्मत उप करण
आवश्यकताओं को पूणर् करने के िल सैक अंत�रक् ष �ेड क्लॉक �ाइ क� खर�द के िलए
अिभरूिचक� अिभव्य� हेतु आवेदन (ईओआई) आमं��त करता है । ईओआई म� क्लॉक �ाइवर
क� अिभकल्पन, �वकास, पर�क्षण एवं अंत�रक्ष गु संबंधी दृ��को का उल्लेख �कयागया हो।
Space Applications Centre (SAC), Indian Space Research Organization (ISRO), Govt.
of India is engaged in the development of payloads for utilization of Space Science and
Technology for peaceful purposes. In this context, SAC invites Expression of Interest
(EoI) for the procurement of space grade Clock Driver meeting requirements of Charge
Coupled Devices mentioned in the requirement document. EOI shall include
approaches for design, development, testing and space Qualification of clock drivers.
आरईओआई दस्तावेज �ारंिभक
आवश्यकता, कायर् का क्, गुणव�ा एवं उ�रदाियतत्व उपलब्
कराता है , �जसे वेबसाइट www.sac.isro.gov.in से एक्सेस �कया जा सकता ह ै
REoI document provides the preliminary requirements, scope of work, quality and
responsibility, which may be accessed from website www.sac.isro.gov.in.
For
CCD Clock Driver Devices (Global)
Nov 2014
Space Applications Centre (SAC)
Indian Space Research Organization (ISRO)
Ahmedabad- 380015
INDIA
SPACE APPLICATIONS CENTRE, AHMEDABAD
Page 1
Table of Contents
1.
INTRODUCTION ....................................................................................................................................3
2.
CONDITION OF INTELLECTUAL PROPERTY..............................................................................................3
3.
SCOPE OF THE WORK ...........................................................................................................................4
4.
RESPONSIBILITIES .................................................................................................................................5
5.
TECHNICAL SPECIFICATIONS .................................................................................................................5
6.
RELIABILITY AND QUALITY ASSURANCE REQUIREMENTS .......................................................................7
7.
DEVICE REQUIREMENTS .......................................................................................................................7
8.
VENDOR DETAILS .................................................................................................................................8
Page 2
1. INTRODUCTION
Space Applications Centre (SAC) of Indian Space Research Organization (ISRO), Govt. of
India is responsible for the different payloads development under its Space Science and
Technology Utilization Program for peaceful use of outer space. SAC proposes Expression of
Interest (EoI) for the procurement of CCD Clock Driver devices for space use fully compliant
to the requirement delineated in this document. EOI includes design and development of high
voltage monolithic devices, testing and delivery of qualified flight model devices.
High speed clock driver devices should be capable of running upto frequency of 40MHz,
voltage swing upto 20V and with capacitive loads driving upto 850pF.
This Expression of Interest (EOI) document provides the preliminary information of the
requirement specifications, work involved, responsibility and delivery schedule etc. The
details and requirements identified may undergo some changes due to the on-going
refinement and based on discussions with the vendors.
The vendors should provide budgetary estimates with different possible options,
configurations and proposals. The vendor is requested to submit following:
• Expression of interest for the execution of the work
• Vendor details as per Table- 1
• Compliance of understanding the EOI document
• Detailed technical proposal
• Budgetary proposal
• Schedule
SAC reserve right to identify qualified vendors based on outcome of EOI.
2. CONDITION OF INTELLECTUAL PROPERTY
“The Intellectual property rights relating to the design, development, processes, technical
information, documents and other details shared/ published by SAC/ISRO shall remain
the exclusive property of SAC/ISRO. Vendor or Personnel deputed/deployed/ assigned
job by the vendor shall make no attempt to unlawfully reveal, misuse or encroach upon
the intellectual or private data/ information/ Computer systems at SAC/ISRO or provided
by SAC/ ISRO to which they may have access to, as part of the work to be carried out “.
Page 3
3. SCOPE OF THE WORK
The work pertains to the procurement of
• Already qualified monolithic CCD Clock Driver devices or
• Devices under qualification or
• Custom developed devices (which will be qualified in the time frame mutually
agreed upon) meeting requirements outlined in this document.
There will be two phase development for devices under qualification and custom
developed devices.
•
•
Phase 1 pertains to design, development and qualification of the device
Phase 2 is the flight model development.
Vendor is requested to submit complete execution plan and comprehensive activities for
the following mentioned works.
The nature of work for new device will be typically (not limited) to the following jobs.
I.
II.
III.
IV.
V.
VI.
VII.
VIII.
IX.
X.
XI.
XII.
XIII.
XIV.
XV.
Formalization of the specifications/requirements generated by SAC
Feasibility analysis by vendor and review by SAC.
Fabrication process finalization
Front End & Back End design
Preliminary design review document generation by Vendor and review by SAC
Die/Wafer fabrication
Die/ wafer level testing and test result generation
Package modeling, thermal model generation and heat extraction methodology
Device Packaging**
Test set up development
Proto device characterization and sample prototype delivery to SAC
Critical design review document generation by Vendor and review by SAC
Device qualification as per section-6
Final Device datasheet generation
Result Review and clearance by SAC
** Device package should support for 40 MHz, 850pF load, 20V swing under thermo-vacuum
conditions @ 55 oC ambient.
Page 4
4. RESPONSIBILITIES
VENDOR
Design, develop and qualify the Tri level CCD clock driver devices as per requirements of
SAC, ISRO.
SAC
SAC will generate electrical, R & QA, approximate quantity and delivery schedule
requirements.
SAC engineers will review test results and provide final acceptance of the product.
Shipment/delivery will be initiated only after due clearances by SAC-ISRO.
SAC-ISRO will participate at different stage of development and reviews like Preliminary
design review (PDR), Critical Design Review (CDR) and sample tests etc.
5. TECHNICAL SPECIFICATIONS
Device will be capable of running from single or dual power supplies while using ground
referenced inputs. Each output can be switched to either the high level (VOH), middle level
(VM) or low (VOL) level, depending on the input/inputs signal level. The inputs will be
compatible with both 3.3V and 5V CMOS and TTL logic.
Features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
TTL/CMOS input-compatible
Clocking speeds DC to 40MHz
Wide output voltage swing (upto 20V)
4V ≥ VOL ≥ -9V
3V ≤ VOH ≤ 18V
VOL ≤ VM ≤ VOH
10ns Tr/Tf at 850pF CLOAD
Matched rise and fall time
Output duty cycle variation ±5%
Output ripple including supply noise, overshoot/undershoot <1 % of output swing
Low quiescent current <1mA and minimum quiescent power dissipation
Low turn On delay time(TON)
Fast output enable/disable
Operating temperature range -55oC to +125oC
4 channels
Page 5
•
•
•
•
•
•
•
Independent Input/output delay programmability for the rising and falling edges on
each channel.
Low output impedance
Low input capacitance
High Peak output current (>2A)
ESD protection, Latch up immune
Short circuit protection Preferred
Preferred Package style CFP with minimum pin count
Two Level clock waveform
Fig. -1
Tr = Rise Time
Tf = Fall Time
TON = Turn On Delay Time
Duty Cycle = Th / (Th + TL)
Page 6
Tri- Level Clock waveform
Fig. -2
6. RELIABILITY AND QUALITY ASSURANCE REQUIREMENTS
The devices already qualified or custom developed shall be Radiation hardened meeting
the requirement (SEL> 80MeV/mg/cm2, TID > 100Krad) and qualified to Class V
requirement of QML 38535 or processed equivalent to MIL-PRF-38535-J, class V for
Space application requirements. In case of processed equivalent to MIL-PRF-38535-J,
class V, the vendor shall clearly define with supporting documents, test reports how the
processing shall meet the requirement of MIL-PRF-38535 Class V in Design, Wafer
fabrication, assembly, packaging and testing.
7. DEVICE REQUIREMENTS:
Devices are required as flight model and equivalent Proto/Industrial/commercial model
with approximate quantity requirements given below:


Proto Type
: ~ >250
Screened Flight Devices : ~ >500
Page 7
8. VENDOR DETAILS
The prospective vendors should submit full details of their technical competence for
undertaking project of this nature, in the technical part of their proposal document. A
preferable format (not limited to) is provided in the following table.
TABLE - 1
S.
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Description
Details
Year of Establishment
Vendor’s Area of Core Competence / Activities
Infrastructure Details (Area, Facilities Etc.)
Annual Turnover in the last two financial years
from electronics device development
Value of major orders currently being executed
Number of VLSI design Engineers
List of in house facilities (license details)
Any tie-ups with relevant / specialized
companies/fab proposed for this activity and list
of their facilities with qualification Status. Concern
from those companies.
Quality certification and Internal QC procedures
followed
Details of similar device if developed for
commercial/Space applications.
Development and Testing of Electronics H/W
experience
Details of test facility planned to be used
Export license requirements, if any
Willingness to provide Non-Disclosure Agreement
(NDA), Confidentiality Agreement, Intellectual
Property Rights (IPR) and Arbitration
Page 8
Company Name:
Name:
Title:
Address:
Telephone:
Fax:
Email:
Website:
Signature:
Date:
Page 9
Contact for any clarification
Sr. Purchase & Stores officer,
Bldg. #30, Room #98,
Space Applications Centre (SAC), ISRO,
Ahmedabad-380015
Telephone: +91 079 2691 3098
Email: publictender@sac.isro.gov.in
Contact for any Technical Information
1. Mrs Shweta Kirkire
SCI/ENGR 'SE', SEDA
Bldg. #38, Room #77,
Ahmedabad-380015
Telephone: +91 079 26913873/3877
Email: shwetak @ sac.isro.gov.in
2. Mr. Hari Shanker Gupta
SCI/ENGR 'SE', SEDA
Bldg.#43,Room #68,
Ahmedabad-380015
Telephone: +91 079 26914368/4395
Email: hari@sac.isro.gov.in
3. Mr. Mohammad Waris
SCI/ENGR 'SD', SEDA
Bldg.#43,Room #94,
Ahmedabad-380015
Telephone: +91 079 26914396/3877
Email: waris@sac.isro.gov.in
Note: Response is expected as per line items proposed in REoI.
Page 10

SAC/EOI/07/2014-15 dt:26-11-2014

Transcription

Similar documents

NEMO-AM Science Workshop - Space Applications Centre

Document 6537362

How To Register Version No 2.1

Welcome History Cohort!

March 2015 - Scottsdale Aquatic Club

A SPECIAL WELCOME TO OUR NEW PRINCIPAL!

Sonoma County Supervised Adult Crew

HERE - Roadburn

Test Administrator Training Module FAQ 2813