SECTORS - Wingate

CORPORATE BROCHURE
SECTORS
CONSTRUCTION, RAIL,
POWER STATIONS, AIRPORTS
& RENEWABLE ENERGY
www.wingate.co.uk
WE OPERATE NATIONALLY, LOCALLY... SAFELY
CONTENTS
Introduction03
Building Services
04
Construction Site Services
08
Power Stations
12
Renewable Energy
16
Case Studies
20
Contact Us 21
Above: Terminal 5, Heathrow (Left) – Birmingham Library (Right)
Cover: Crossrail Station Canary Wharf (Top Left) – Glasgow Hospital (Top Right)
London Olympic Park 2012 (Bottom Left) – Hammersmith Train Depot (Bottom Right)
WE BEGIN BY LISTENING, WE ASSIST THROUGH EXPERIENCE
AND WE RESOLVE WITH EXPERTISE
WINGATE are a family owned company with a proven
record of client acknowledged performance on Iconic
projects throughout the UK with ten operational centres
from Aberdeen to Basingstoke.
OUR SERVICES
OUR PEOPLE
We provide a combination of survey, design, supply,
installation, maintenance, testing and commissioning in
the following areas:-
We have a high percentage of staff and operatives who
have exceeded 20 years service to the company. The
four Board Director’s total 90+ years and our ten regional
managers exceed 200 years. At Wingate we appreciate
that loyalty but it also demonstrates the depth of
experience available to you… our client.
• Electrical
• Mechanical
• Security
• Communications
OUR MARKETS
HEALTH & SAFETY
Our experience and expertise is diverse with many
differing types of projects in the following sectors:-
Health & Safety is a Wingate Management Board priority
and we have a Behavioural Safety Programme called
‘Make it Safe - Make it Home’ which is based on the IIF
programme.
• Commercial
• Retail
• Transport
• Government
• Urban Regeneration
• Education
• Military & Defence
• Healthcare
• Pharmaceutical
• Infrastructure
• Hotel
• Sports & Leisure
• Residential
• Industrial
• Arts & Culture
3
We have an excellent H&S record of which we are proud
but not complacent; as we work hard to improve year
on year.
BUILDING
SERVICES
4
BUILDING SERVICES
ELECTRICAL & MECHANICAL
OUR SERVICES
Design, Supply, Installation, Test, Commission, Maintenance and Handover:
DESIGN
Our Building Services Division will take your design and build project through each
design stage from concept to completion. Our Engineers and Designers are efficient in
the use of design software (Dialux and Amtech) to value engineer your design to meet
the project commercial constraints. We offer experience to deliver detailed designs to
meet Grip Stage 5 and RIBA Stage C, D, E & F.
SUPPLY
Throughout our fully audited supply chain, our clients and projects are fully supported by
a vast network of suppliers, managed by both our central and branch level procurement
team with a wealth of experience and product knowledge to ensure your project is
delivered not only to the highest standard, but also on time and within the cost constraints.
MECHANICAL INSTALLATION
Our mechanical installation teams are experienced in delivering a full diversity of
mechanical services within commercial, industrial and rail environments. Our Building
Services Division will undertake your storm water management; hot and cold water systems;
comfort cooling and refrigeration; air handling; air extract and tempered air heating; heat
recovery; gas installation; purging; compressed air; commissioning or decommissioning.
These services are carried out throughout our UK network of regional branches.
WE OPERATE WITH A DETERMINATION TO
DELIVER OUR SERVICE ON TIME AND WITH
MINIMUM DISRUPTION – BUT WE NEED THE
HELP OF YOUR PROJECT TEAM
5
ELECTRICAL INSTALLATION
Our Operatives are experienced in the installation of a full range of electrical services
within many different environments, from the deep tunnels of the London Underground
to the open farmland and vast roofs of PV Solar. We specialise in the installation of
mains and sub-mains through to final circuit installation, with our own cable pulling
teams capable of installing long cable runs of large cables in areas from underground
duct and trench systems to roof mounted cable ladder ways.
TESTING & COMMISSIONING
With a dedicated team of Testing and Commissioning Operatives, we can cater for all
your project completion needs. Wingate boast a vast array of the latest calibrated test
equipment with trained and experienced Operatives, allowing us to cater for all areas
of solar PV testing, performance ratio testing and G59 relay set up with witness tests.
Testing to BS 7671, trend BMS commissioning, lux level survey and a full range of power
logging and harmonics analysis.
MAINTENANCE
Project completion and handover can often be just a milestone as we build a
maintenance programme specific to your needs/cost constraints and environmental
factors. Whether your needs are routine lamp changes, a light fitting clean, or portable
appliance testing, air filter changes or a full plant shutdown with motor rewinds, we will
support your needs through every stage by utilising out of hours visits to minimise disruption.
OUR PEOPLE
• Our Project Managers, Engineers, Supervisors, Foremen and Operatives hold current
ECS or CSCS certification, are JIB/SJIB graded or are each qualified and experienced
within their own discipline.
• Through training, Wingate encourage each individual to contribute to the best of their
ability, to increase their potential and fulfil personal ambition.
• Our employees receive regular training (for example IOSH and CITB) and specialist /
development training to remain aware of the latest changes in legislation.
6
OUR MARKETS
RAIL & INFRASTRUCTURE:
• London Underground
• Network Rail
• Airports Bridges & Tunnels
RENEWAL TECHNOLOGY:
• Solar Photovoltaics
• Commercial & Office Fit-Outs
• Private & Government Buildings
TECHNICAL ENVIRONMENTS:
• Testing, Laboratories
INDUSTRIAL:
• External & Flood Lighting
• Processing Plants
CURRENT AND COMPLETED PROJECTS
• LUL Stockwell Station, London: M&E Services to a Station refurbishment.
• Diamond Light Source, Beam Line, Oxfordshire: Electrical, Specialist Earthing, Data
& Comms within the National Synchotron facility.
• Olympic Village N12 Pedestrian Foot Bridge, London: Design, Install, Commission &
Handover an Integrated Lighting Scheme.
• LUL Euston Station, London: Station lighting upgrade and replacement.
• LUL Hammersmith Depot, London: M&E Services to the Depot Extensions, DC Power
Upgrade, Fire Alarm, Lighting, Comm’s upgrade.
• Chediston Hall Solar Farm, Suffolk: Installation of a 12.3 MWp, 50,400 ground mount
Solar Farm.
• LUL Cannon Street Station: M&E Surveys, Design & Services installation for the Station
development.
• LUL Notting Hill Gate Station, London: Electrical Services & Lighting upgrade during
a Station refurbishment.
7
CONSTRUCTION
SITE SERVICES
8
CONSTRUCTION SITE SERVICES
Since our inception in 1973 we have been providing temporary power, lighting and
mechanical distribution systems as an enabling function for other trades to complete
their works packages throughout the construction phase of a project.
During this period the products we use and services we provide have obviously moved
on and today a more professional approach in our Industry has assisted us in our
continuing efforts to promote the importance of a well thought out and well-designed
installation.
The benefit of good planning does not always provide the most competitive price
at outset but it will, in most projects, provide best value over the project programme,
improve Health & Safety, reduce utility consumption costs, and reduce carbon emissions.
We can provide a combination of design, supply, installation, maintenance, testing,
and final removal of the system against the following packages:
• 11Kv HV Installations
• Incoming Services and LV Distribution
• 415/110volt Power
• Hot & Cold Water Installations
• UPS Installations
• Lightning Protection
• Emergency Lighting
• Data
• Heating & Ventilation
• CCTV
• Fire Alarms
• Containment
• Generators
• Earthing & Bonding
• General Lighting
• Drainage
Our Contracts Managers, Supervisors, Foremen and Operatives hold current CSCS
certification, are JIB/SJIB graded and qualified within their own discipline.
We have operational depots in Aberdeen, Glasgow, Newcastle, Manchester and
Leeds. Our Glasgow office is the central hub location for the Northern depots and
supports each one for all Wingate Plant requirements from their comprehensive
workshop facilities and skilled team.
9
We have further depots in Birmingham, Basingstoke, Heathrow and London Waterloo. In
the South our central location for Plant is Basingstoke where the workshop facilities are
similar to Glasgow but more extensive in Plant and Operative volume.
Each office has its own management structure to support in-house Design, Operational
and Commercial activities and the Depot Manager reports directly to Richard
Cummins who is a Main Board Director.
Central support facilities are provided at Head Office in Basingstoke for Health & Safety,
Sustainability and Environment, Supply Chain Approval, Human Resources, Marketing
and Finance.
We have a significant fleet of Electrical & Mechanical plant of over £5M in value.
Electrical: HV Transformers, Mains Distribution Assemblies, Sub Mains Distribution
Assemblies, 415 volt Transformers, Welding Outlet Units, Earth Leakage Protection
units, Evacuation Alarm Systems , 110 volt Distribution Boxes, LED Lighting, Fluorescent
Lighting, Floodlighting and Cables and accessories.
Mechanical: Single and twin speed controlled water pumps with PVC and Fibre Glass
Tanks. The capacity ranges from 500 to 2500 litres. We also have alarmed Macerator/
Grinder Waste Pumps with holding tanks ranging from 175 to 5000 litres.
PROJECT EXPERIENCE AND EXPERTISE
Our teams consist of skilled qualified individuals who have built their career in the
Construction Industry and are long serving employees with Wingate. Their experience
to overcome difficult operational constraints is invaluable whilst ensuring our high
standards of Health & Safety are maintained.
We operate on the majority of Private and Public sector projects which includes security
clearance in Airport Terminals (Airside), Rail Stations (Underground and Surface) and
MOD (Nuclear Licensed sites).
10
COMMERCIAL APPROACH
We have experienced commercial personnel who understand Construction Industry
Forms of Contract and can, if requested, provide cost transparency and monitor
market pricing to ensure competitiveness and value for money.
This approach is indicative of our belief to agree project values promptly after
completion of our works.
SERVICES OFFERED INCLUDE:
• Design – We do appreciate that time is not always available to you but if assistance
is required then we can help. We believe we can make a difference either at your
tender submission stage or prior to you inviting competitive tenders for our package
of works.
• Supply – We will provide all that is necessary to complete our installation although we
will consider incorporating items you may have available; providing the equipment
does not compromise our offer.
• Installation – All our installations conform to the latest British Standards and are carried
out by qualified personnel.
• Maintenance/Attendance – We can provide planned or visiting maintenance/
attendance to suit your projects requirements. We also operate a call-out facility that
includes out of site operational hours for any emergency.
• Testing – Our testing is carried out by our own test engineers who are not involved
with installation activities and report directly to the responsible Contract Manager for
your project.
WE UNDERSTAND THE NEED TO WORK
SAFELY, CONTROL COSTS AND COMPLY
WITH PROGRAMME CONSTRAINTS IN A
DEMANDING ENVIRONMENT
11
POWER
STATIONS
12
POWER STATIONS
TEMPORARY UTILITIES
Design, Supply, Installation, Adaption, Testing and Maintenance of:
ELECTRICAL:
HV/LV Distribution, Earthing, Cable Jointing, Internal/External Safety Access and Task
Lighting, Small Power Systems (110v), Testing and Certification.
MECHANICAL:
Potable/Non-Potable Water and Foul/Drainage Installations. Rainwater harvesting,
Pumped systems and Trace Heating.
DATA & COMMUNICATIONS:
Voice and Data network Installations, Structured cabling and wireless systems.
SECURITY:
Evacuation Alarms, CCTV, Turnstiles and Traffic Barriers.
CIVIL WORKS:
Design and installation of all builders’ works associated with utility installations, Trenching,
Ducts, Foundations, Concrete Bases and Foul Drainage systems.
MAINS UTILITY SUPPLY INSTALLATIONS:
Electrical, Water, Gas, Data and Communications for Contestable Works. This service is
provided for both Temporary and Permanent installations including all associated Civil
Engineering work.
PERMANENT MECHANICAL AND ELECTRICAL INSTALLATIONS:
HV/LV Mains Power Distribution , Internal and External Lighting including Emergency
Lighting, Small Power Distribution, Heating, Lightning Protection, Control Systems (BMS),
Fire Detection, Alarms, CCTV, Access Control, Data Cabling, Power to Mechanical
Services.
13
CURRENT PROJECTS
Carrington, Manchester
Ferrybridge, West Yorkshire
Ridham Dock
Courtauld Road
Battlefield, Shrewsbury
Hunterston, Ayrshire
Wilton, Cleveland
Brigg, Humberside
Birmingham, West Midlands
Manvers, Rotherham
860MW CCGT Power Station
108MW Multi Fuel Power Station
30MW Biomass CHP Plant
MBT and CHP Power Plant
15MW Energy from Waste Plant
Convertor Station
35MW Energy from Waste Plant, Cleveland
40MW Renewable Energy Plant, Humberside
Recovery Centre
MBT Recovery Facility, Rotherham
EARLY CONTRACTOR INVOLVEMENT
We believe our extensive knowledge and experience is of great benefit to our clients
when they engage us at the earliest stages of a project, even down to Wingate
supplying and installing a generator for the initial small site accommodation set up.
We are the specialists in your sector – it is what we do.
UNDERSTANDING CLIENT AND PROJECT TEMPORARY UTILITY REQUIREMENTS
• Initial Works; Design, set cost plan, Establish Temporary/Permanent main utility
supplies, Initial site accommodation setup, Final site accommodation compound.
• Construction Site utility distribution, electrical, water, drainage, data &
communications.
• Engineering Process Phase; upgrade power and lighting.
• Maintenance/Removal Phase: Maintenance, adaptions and phased removal
of temporary utility systems.
• CCGT, EfW, Biomass, Gasification, CHP plants require HV mains supplies typically from
1MVA to 3.5MVA
• High electrical demand items; Site Establishments, Cranes, Pumping, Cranes,
Welding and Commissioning supplies.
• Challenging installations conditions, built on rock, in quarries. Compatibility of
subcontractor electrical equipment with onsite installations.
14
• Increased lighting requirements from Construction phase going through to
engineering process phase.
• Security Systems; Access systems, safe keeping of process plant and equipment,
replacement time severely impacts on contract programme.
• Projects demand first class design, management, labour and materials.
OUR CLIENTS
UK, European and Global companies ranging from Project Developers, Client/Investors,
EPC’s (Engineering Procurement Contractor), Process Engineering companies, Civil/
Construction companies, Specialist Subcontractors.
EARLY NOTICE OF CHANGES TO
PROGRAMMED WORKS OR KNOWN FUTURE
WORKS CAN NOT ONLY SAVE ON COST BUT
ALSO ON FRUSTRATION TO ALL PARTIES
15
RENEWABLE
ENERGY
16
RENEWABLE ENERGY
Our involvement in Renewable Energy has seen success in both the Off-Shore Wind
Farm and Solar (PV) Farm sectors.
OFF-SHORE WIND FARMS
Albeit on one single project to date we have built considerable experience and
expertise in providing a comprehensive scope of our total service range to the Gwynt Y
Mor Off-Shore Wind Farm eight miles out of Liverpool Bay.
A detailed Case Study of our contribution to this project is available but to summarise
this is one of the world’s largest off-shore wind farm projects and currently the largest
under construction anywhere in Europe.
It is a 2Billion (Euro) value project consisting of 160 Wind Turbines, once operational it will
produce an installed capacity of 576MW using Siemens 3.6MW turbines and generators.
It will be capable of generating enough energy to meet the average annual energy
needs of around 400,000 homes. The wind farm is due to be fully operational in 2015.
The Client is RWE Innogy in partnership with Stadtwerke Munchen Gmbh and Siemens AG.
SOLAR PV
Photovoltaic systems are considered an essential component for future power
generation infrastructure. Worldwide, hundreds of thousands of systems already provide
solar power directly to private households and commercial and industrial plants, or
feed the power into the public grid. This means that every user of electricity can now
have clean solar power.
WHAT IS A SOLAR FARM?
Solar farms, or solar parks, are the large-scale application of Solar Photovoltaic
(PV) installations used to generate electricity. They often cover large areas of land
(between 1 and 100 acres) and therefore they are usually developed in rural locations.
Approximately 25 acres of land is required for every 5 megawatts (MW) of installation,
enough to power 1,515 homes1.
1 Based on average annual consumption figures for a house of 3,300 kWh of electricity (source DECC, Ofgem)
17
Solar farms go through a rigorous planning procedure to get approval. This takes into
account the suitability of the site, any potential impact on the locality and relevant
renewable energy targets.
The UK needs solar power to meet the 15% EU renewable energy targets by 2020, but it
also creates investment and local green jobs, whilst reducing the reliance on overseas
fossil fuel imports. As this valuable and rapidly deployable sector grows, solar will help
businesses to manage their electricity costs while reducing their carbon emissions, and
will provide a choice about where you obtain your power.
The Department of Energy and Climate Change (DECC) considers that solar PV could
contribute up to 20 gigawatts (GW) of generating capacity by 2020 if costs continue
to fall towards grid parity. To support this at the large scale, solar farms are eligible for
financial incentives under the Renewables Obligation (RO) scheme. Systems under
5MW can choose between the RO and the Feed-in Tariff Scheme (FITs).
SOME FACTS ABOUT SOLAR FARMS
1. They generate electricity locally and feed into the local electricity grid using a free
source of energy (the sun) to generate electricity on bright cloudy days as well as in
direct sunlight.
2. For every 5MW installed, a solar farm will power 1,515 homes for a year and save
2,150 tonnes of CO2.
3. They represent time-limited, reversible land use and provide an increased, diversified
and stable source of income for landowners.
4. They may have dual purpose usage with sheep or other animals grazing between
rows, and can help to support biodiversity by allowing small animals access to
otherwise fenced-off land, with bird and insect fodder plants and wildflowers sown
around the modules.
5. If 10,000MW of solar was installed on the ground, it would only use 0.1% of UK
agricultural land area, whilst being able to generate enough electricity for over 3
million homes.
6. There are no moving parts, and maintenance is minimal.
7. There is no by-product or waste generated, except during manufacturing or dismantling.
8. They have lower visual and environmental impacts than other forms of power generation.
9. Renewables give the customer the choice of buying green electricity and reduce
reliance on scarce fossil fuels.
18
TYPICAL SCOPE OF WORKS PROVIDED
INSTALLATION OF:
• Sub-surface cable ducting system
• DC string cables
• String combiner boxes, fuses and surge protection
• SWA cables between invertors and combiner box
• Cat 5e cable data infrastructure
• CCTV system
• HV cable and protective tiles
• Perimeter and mass grid earthing systems
• 400volt power supplies
• 230volt small power within sub stations
• Performance monitoring system
TERMINATION OF:
• MC4 terminations to DC string cables
• String combiner boxes
• RJ45 plugs
• 400/230volt power supplies
• Perimeter and mass grid earthing
TESTING OF:
• DC string and module performance
• Cat 5e comms cabling and data networking
• 400/230volt power supplies to BS 7671
• Perimeter and mass grid earthing
• Termination integrity
To date we have completed or are currently operational on twelve Solar Farms in the
West Country and East Anglia.
19
CASE STUDIES
For a more detailed look at some of our completed projects click on any of the links below.
BUILDING SERVICES
POWER STATIONS
Haggerston Station
Hackney, London
TFL; Balfour Beatty; Mansell
Click here to view full case study >
Carrington CCGT Plant
Carrington, Greater Manchester
Carrington Power Ltd (owned by ESBI)
Click here to view full case study >
CONSTRUCTION SITE SERVICES
London 2012 Olympic Park
London
Olympics Delivery Authority (ODA)
Click here to view full case study >
BSkyB Building 2
Brentford, Middlesex
Sky
Click here to view full case study >
AIRPORTS
Terminal 2A
Heathrow Airport
Heathrow Airports Ltd. (HAL)
Click here to view full case study >
20
Four Ashes Energy from Waste Plant
Four Ashes, Staffordshire
Veolia Environmental Services
Click here to view full case study >
RENEWABLE ENERGY
Gwynt y Mor Offshore Wind Farm
Offshore: 8 miles offshore in Liverpool Bay
RWE Npower Renewables
Click here to view full case study >
Lexham Solar Farm
Tittleshall, Norfolk
Light Source Renewable Energies
Click here to view full case study >
OPERATING CENTRES
Aberdeen
Minto Drive, Altens Industrial Estate
Aberdeen, AB12 3LW
Contact: Sam F. Kerr
Tel: 01224 890434
Heathrow (Airports)
The Atrium, 31 Church Road
Ashford, Middlesex, TW15 2UD
Contact: Graham Jennings
Tel: 01784 424660
London
25 Copperfield Street
Waterloo, London, SE1 0EN
Contact: Andy Roberts
Tel: 020 7401 3856
Basingstoke (Head Office)
Wingate House, Rutherford Road
Basingstoke, RG24 8QD
Contact: Marc Fox
Tel: 01256 330000
Heathrow (M&E)
The Atrium, 31 Church Road
Ashford, Middlesex, TW15 2UD
Contact: Paul Simpson
Tel: 01784 424667
Manchester
Unit C1/C2, Sundance Court
Off Kansas Avenue, Salford, M5 2GZ
Contact: Danny Ayrton
Tel: 0161 872 3306
Birmingham
219 Bridge Street West
Newtown, Birmingham, B19 2YU
Contact: Matthew Cummings
Tel: 0121 380 0740
Leeds
Unit 7, Lockwood Close
Leeds, West Yorkshire, LS11 5UU
Contact: Danny Ayrton
Tel: 01132 765888
Newcastle
Unit A, Network Centre, Berkley Way
Jarrow, Tyne & Wear, NE31 1SF
Contact: Terry Spence
Tel: 0191 430 1600
Glasgow
70 Jessie Street
Polmadie, Glasgow, G42 0PG
Contact: Sam F. Kerr
Tel: 0141 422 1800
JIB (Joint Industry Board)
Registered Number D1731000
ECA (Electrical Contractors Association)
Registered Member
Registered Number 34-0167
NICEIC (National Inspection Council
for Electrical Installation Contracting)
Registered Number 10548
CHAS (Contractors Health and Safety
Assessment Scheme)
Accredited Contractor
Renewable Energy Consumer Code
Registered Number 00050977
ISO 14001:2004 registration
(Environmental Certificate)
Registered Number EMS 537051
NICEIC MCS Approved Installer
Registered Number NIC 2538
ISO 9001:2008 accredited for
Quality Assurance by BSI
Registered Number FS45508
Link Up
Registered Number 21651
OHSAS 18001:2007 registration
(Occupational Health and Safety
Management Certification)
Registered Number OHS 596810
Achilles UVDB
Registered Number 094518
SMAS Worksafe Contractor
Registered Number 32266
Achilles Building Confidence
Registered Number 300027
Constructionline
Registered Number 141423