Explosion-proof Marine Grounding System SEK-2

Transcription

Explosion-proof Marine Grounding System SEK-2
H. Timm Elektronik GmbH + Humboldtstr. 29 + D - 21509 Glinde
Tel. +49 40 248 35 63-0 + Fax +49 40 248 35 63-39
info@timm-elektronik.de + www.timm-elektronik.de
Explosion-proof Marine Grounding System SEK-2
For potential equalization during loading
and unloading of oil tankers in hazardous
areas of zone 1
SEK-2
for carrying out potential equalization
between ship and shore by using a special
ship grounding clamp of stainless steel
Controlled Potential Equalization
Our Marine Grounding Systems are in use for more than 25 years world-wide on
loading terminals for implementing a supervised potential equalization line during
the loading and unloading of sea oil tankers and inland tank vessels with fuels,
fuel oil or other petroleum products. The Marine Grounding System SEK-2 realizes
the potential equalization between the oil tanker and the loading bay. It is suitable
for operation in hazardous areas of zone 1.
When loading petroleum products and other non-conducting inflammable liquids
into oil tankers, an explosive atmosphere can occur at the loading bay. By reason of the physical determined potential differences between the tanker and the
loading bay (among others by galvanic processes), a sufficiently conductive
bonding line for potential equalization is required in order to prevent sparking
effectively (for example when connecting the product hoses or a gangway).
At the same time the electrostatic charges, which are generated by loading fuels,
are diverted in a safe way by ensuring a conductive bonding line. The danger of
explosion by an unintentional discharge of static electricity is eliminated.
Specially Designed Grounding Clamp
The specially designed grounding clamp ensures that the through-connection
of the potential equalization takes place only when the ground clamp has been
tightly fastened and a low-resistance contact is made.
A soon as the correct grounding is detected, the clearly visible indicator lamps
and the potential-free output to control the loading process are switched over to
release.
Certified to ATEX 95
All components are separately certified in accordance with the European
explosion prevention directive ATEX 95 for the operation in hazardous areas of
zone 1. All components are built into a compact water-jet protected switchgear
cabinet of stainless steel (Protection class IP 65). Thereto connected is a standard
20 m neoprene grounding cable of 4 x 10 mm² with the special ship grounding
clamp of stainless steel.
Components of SEK-2
Water-jet protected switchgear cabinet of
stainless steel (protection class IP 65) with:
■■
Grounding Control Device EKT-3
■■
Measuring Transducer EKOM-3
■■
Grounding Control Unit ESE-3
■■
20 m neoprene grounding cable 4 x 10 mm²
■■
Special grounding clamp of stainless steel
with integrated auxiliary contact for
connecting through the measuring line
■■
2 built-in indicator lamps “red” and “green”
to signal the operating status