DSP-D Datasheet - Powersoft Audio

DSP-D
2in/4out DSP board for DigiMod amplifier modules
DSP-D is a 2in/4out processing board
based on Analog Devices SigmaDSP ®
platform and represents a highly flexible and
powerful tool for both the designer and the
end user.
Specifically designed for DigiMod Series
amp modules, it provides the loudspeaker
designer with all tools needed for tailoring
the amplifier’s behavior through a precise
24 bit @ 48 kHz AD/DA conversion and 26
bit processing, to perfectly fit any application.
With the Analog Devices SigmaStudio™
software a totally customizable signal path
can be built by choosing from a library of
tens of different algorithms, from LinkwitzRiley crossovers (up to 48dB/oct) to IIR and
FIR filters, RMS and peak limiters and delay
for speaker alignment.
DSP-D is now fully supported into
Powersoft Armonìa Pro Audio Suite™
software, to allow easy and quick
programming process for the designer and
let end users easily control and monitor
audio systems active loudspeakers giving
access to parameters settings, preset banks
management and group information.
5 input filters and delay, 2 crossovers + 8
output filters, Peak limiter, RMS limiter with
filter shaping per output channel are available
in Armonìa™, with the possibility of locking
any part of the presets for OEM proprietary
processing protection.
4 different presets can be stored on the
DSP-D, allowing for easy selection of desired
processing setting by end user, even when no
network or remote control are available.
®
®
DIFFERENTIAL
PRESSURE CONTROL
PATENTED
onboard
33 Full integration with Armonía Pro Audio Suite™ software
33 A signal processing solution dedicated to Powersoft amplifiers
ff The DSP-D is a simm board that can be easily mounted in all DigiMod
Series amplifier modules and optimized for a compact integration,
guaranteeing consistency and compatibility with all products and
representing a simple-yet-powerful and reliable solution to have a fully
processed system with no need of additional wiring or other third-party
electronics.
33 Optional interface panel:
ff The optional interface panel provides a quick and easy way for
connecting signal input and implements RS-485 connectivity; a knob
for level adjustment, a push-button for switching preset and four status
LEDs are provided as well.
33 ProNet-485: Quick, Easy and “End User Friendly”:
ff The ProNet-485 programmer is a small but versatile tool, allowing
to access the DSP-D with optional interface panel from Armonìa Pro
Audio Suite™ via RS485 connection. It is perfect for both the designer
needing a simple and fast way to set up the processing and for the end
user to remotely control and monitor any single powered loudpspeaker,
changing processing parameters and managing the whole audio system.
33 One input channel:
ff Analog input: 24 bit @ 48 kHz AD converter with Tandem® architecture.
33 Line-arrays
33 High-Level 2-way systems
33 OEM rack processors
ff Digital input: 24 bit @ 32 to 196 kHz; internal SRC makes the system
independent from the clock of the digital input stream.
ff Input gain, trim and mute.
ff Input EQ: three layers of 32 raised-cosine filetrs each.
ff Up to 4 s of input delay.
33 DSP Programming Boards:
ff Both DSP Programming Boards allow the speaker designer to build
its own DSP path and customize it arbitrarily choosing among tens of
different algorithms within of the Analog Devices SigmaStudio® software
environment.
ff Loading the bank of presets into the DSP-D is fast, easy and error-proof;
the DSP Programming Board PRO can store on board up to 50 banks of
4 presets each.
© 2014 Powersoft – Data are subject to change without notice.
Powersoft S.p.A.
Via Enrico Conti, 5 - 50018 Scandicci (FI) Italy
Tel: +39 055 735 0230 - Fax: +39 055 735 6235
www.powersoft-audio.com
powersoft_DSPD_data_en_v2.5
ff The DSP Programming Boars PRO and LITE are perfect in production lines
and testing departments for easily setup and programming the DSP-D.
DSP-D
2in/4out DSP board for DigiMod amplifier modules
Specifications
General
Architecture
Internal processing
Latency
Configuration
Analog Devices SigmaDSP ® 50 MIPS
28 bit data path with 56 bit internal processing
1 ms fixed latency architecture
2 input, 4 output
User data storage
Up to 4 local presets, unlimited via Armonía Pro Audio Suite™ software
Firmware update
RS-485 protocol or DSP Programming Board
Remote control
Armonía Pro Audio Suite™ software
DSP features
Delay
Input equalizer
Output equalizer
Crossover
Limiters
Damping control and impedance monitoring
Input Impedance
Parameters locking
Up to 170 ms output delay for time alignment
5 parametric equalizers: hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
Parametric equalizers: custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
Peak limiter, RMS limiter, frequency dependent RMS limiter
DampingControl™ and cable resistance compensation, up to 2 � negative/positive compensation
for optimal low-end speaker control
High performance monitoring of Power Amp output voltage/current/impedance
Protection of OEM/user features
AD/DA converters
AD Converters
Sample rate supported
Dynamic range
DA Converters
THD+N
Dual 24 bit 48 kHz Tandem ® architecture
32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
120 dB
Dual 24 bit 48 kHz Tandem ® architecture
< 0.005% (20 Hz - 20 kHz)
Dynamic range
120 dB
Frequency response
20 Hz - 20 kHz (-0.5 dB)
Audio
Max
® input voltage
8 dBu
Max output voltage
16 dBu
S/N ratio
> 116 dB
THD+N
< 0.02% (20 Hz - 20 kHz)
DIFFERENTIAL
PRESSURE CONTROL
PATENTED
onboard
© 2014 Powersoft – Data are subject to change without notice.
Powersoft S.p.A.
Via Enrico Conti, 5 - 50018 Scandicci (FI) Italy
Tel: +39 055 735 0230 - Fax: +39 055 735 6235
www.powersoft-audio.com