Components for HD fibre installations

COMPONENTS FOR HD
FIBRE INSTALLATIONS
Each and every HD fibre infrastructure has different
requirements and budgets, but above all requires
ease of installation. For this reason LEMO UK has
prepared a range of components and kits to enable
customers to select those which most closely meet
their needs.
The use of modern splicing equipment provides a
fast and reliable means of installing HD fibre links in
fixed locations. There are many means of achieving a
suitable termination of panel mount connectors in
installations, from a simple termination to a fully
replaceable junction. Alternatively, if the conditions
permit, complete cable assemblies can be prepared
in the factory environment and installed using the
LEMO cable puller.
This leaflet gives an indication of the scope of supply
- other bespoke customer requirements can be
accommodated as required.
COMPONENTS FOR HD FIBRE INSTALLATIONS
Hardwired single junction kit
Simple hardwired single junction kit typically for wallbox
application where there is very little space.
Part number for complete kit: UKE.0528.FXW.3K.01
Customer supplies wall panel and installed cable. It is best to
ensure approximately 2m of the spare cable at the wallbox for
the purposes of termination. Patchcord is cut in half and spliced
directly to the installed cable. Electrical conductors of the
installed cable are terminated directly to the LEMO connector.
Component description
Quantity
per kit
Part Number
LEMO panel plug connector including
crimp electrical contacts
1
FXW.3K.93C.TLM
LEMO F2 - LEMO F2 fibre patchcord
to fit above connector
1
UKF.F2.A93.000100
Splice cassette
1
UKT.0000733
Other connectors
Panel socket connector including crimp
electrical contacts
Part Number
EDW.3K.93C.TLC
Bulkhead socket connector including crimp
electrical contacts
PEW.3K.93C.TLCT96Z
Alternative kit with “EDW” connector
UKE.0528.EDW.3K.01
Alternative kit with “PEW” connector
UKE.0528.PEW.3K.01
LEMO 3K.39C panel connectors with tails
LEMO 3K.93C panel connectors with tails, either for use with
boxes as described below, or other customer-defined use.
Component description
Part Number
FXW.3K.93C.TLM
with 0.5m bare end electrical and fibre tails
UKF.3K.B59.000050
FXW.3K.93C.TLM with 0.5m electrical and fibre tails
terminated to SC’s and standard 6-way electrical
connector for use with boxes below
UKF.3K.B60.000050
EDW.3K.93C.TLC
with 0.5m bare end electrical and fibre tails
UKF.3K.B61.000050
EDW.3K.93C.TLC with 0.5m electrical and fibre tails
terminated to SC’s and standard 6-way electrical
connector for use with boxes below
UKF.3K.B62.000050
Boxed junctions for wallbox applications
Boxed junction typically for wallbox application where space is
more readily available, suitable for up to 5 installed HD cables.
Supplied with cable fixing points and fibre connectors with tails
for splicing. Allows for easy replacement of panel connectors or
fibre tails. Select from above the required number of panel
connectors with tails to complete the kit.
Customer supplies wall panel
and installed cable(s). It is
best to ensure approx 2m of
spare cable for termination.
The cable is terminated
within the junction box, by
splicing of fibres and crimping
to standard 6-way electrical
connector electrical connectors,
the LEMO panel connector is
mounted to the wall panel and the tail
connectors are plugged into the junction box.
Component description
Part Number
Box for 1 HD cable
UKE.0528.WBX.3K.01
Box for 2 HD cables
UKE.0528.WBX.3K.02
Box for 3 HD cables
UKE.0528.WBX.3K.03
Box for 5 HD cables
UKE.0528.WBX.3K.05
Integrated panel with splice tray and connector junctions
Integrated panel with built in splice tray and connector junctions
for use where space is limited, either at a wallbox or a patching
unit. Up to 3 can be mounted side-by-side to fit in 3U rack
dimensions. External connectors can be either panel plugs, for
link to cameras, or panel sockets for links to CCU’s or OB van.
Allows for easy replacement of external connectors or the fibre
contacts if damaged in use.
Customer supplies wall/
rack mounting plate and
installed cable(s) - it is best
to ensure approx 2m of
spare cable for termination.
Cable is terminated to the
panel by splicing of fibres
and crimping to standard
6-way electrical connectors.
LEMO panel connector(s)
and tails come ready fitted.
Component description
Part Number
Panel with FXW.3K.93C.TLM for 1 HD cable
UKE.0528.IFX.3K.01
Panel with FXW.3K.93C.TLM for 2 HD cables
UKE.0528.IFX.3K.02
Panel with EDW.3K.93C.TLC for 1 HD cable
UKE.0528.IED.3K.01
Panel with EDW.3K.93C.TLC for 2 HD cable
UKE.0528.IED.3K.02
Rack mounted splice tray with connector junctions
Rack mounted splice tray with connector junctions for patch unit.
Can accommodate up to 10 LEMO connectors.
Customer supplies rack and installed cable - allow 2m spare for
termination. Cable is terminated to the tray by splicing of fibres
and crimping to standard 6-way electrical connectors. LEMO
panel connectors and internal tails come ready fitted.
Component description
Part Number
Complete unit with FXW.3K.39C.TLM
for 1 installed HD cable
UKE.0528.STF.3K.01
Complete unit with FXW.3K.39C.TLM
for 2 installed HD cables
UKE.0528.STF.3K.02
Complete unit with FXW.3K.39C.TLM
for 3 installed HD cables
UKE.0528.STF.3K.03
Complete unit with FXW.3K.39C.TLM
for 6 installed HD cables
UKE.0528.STF.3K.06
Complete unit with FXW.3K.39C.TLM
for 10 installed HD cables
UKE.0528.STF.3K.10
Complete unit with EDW.3K.39C.TLC
for 1 installed HD cable
UKE.0528.STE.3K.01
Complete unit with EDW.3K.39C.TLC
for 2 installed HD cables
UKE.0528.STE.3K.02
Complete unit with EDW.3K.39C.TLC
for 3 installed HD cables
UKE.0528.STE.3K.03
Complete unit with EDW.3K.39C.TLC
for 6 installed HD cables
UKE.0528.STE.3K.06
Complete unit with EDW.3K.39C.TLC
for 10 installed HD cables
UKE.0528.STE.3K.10
Typical installation
The schematic opposite is a typical
HD layout showing where splicing
can benefit the installation of a
system. Also shown are abbreviations
of LEMO connector models most
commonly used in such applications
(e.g. “FMW” = “FMW.3K.93C.TLM”).
* CCU, Patching and floor cables can all be factory assembled for best results
COMPONENTS FOR HD FIBRE INSTALLATIONS
Other products available
Cable assemblies
Cable puller
Factory terminated LEMO cables assemblies ready for installation
consist of stainless steel LEMO connectors mounted to Furukawa
cable and are fully tested to the highest standards to ensure reliable
connectivity and dependable operation in the field.
With an outside diameter of only 17.5mm the LEMO cable puller,
temporarily replaces the outer shell of the connector. This pullthrough tool also ensures that the pulling force is applied directly to
the central strength member of the cable, thereby protecting the
optical fibres. Part number: DCS.3K.175.72.LN
Pre-terminated contacts
Field repair kit
The F2 pre-terminated fibre optic
contact was designed as a repair
solution but may also be used for
low use indoor fixed installations.
LEMO offers a wide
range of high quality
accessories and tooling
for field repair of fibre
optic connectors
and cable assemblies.
Pre-terminated F2 male contact
Part number: FFT.F2.BA2.LCE10
Pre-terminated F2 female contact
Part number: PST.F2.BA2.LCE10
Components for plug repair: FUW.3K.93C.ZLMC96W
Components for socket repair: PUW.3K.93C.ZLCC96W
Field repair toolkit: DRV.91.3K9.3CPRET
Patch cords
Fibre patchcords provide any installer with the means to flexibly
achieve a high quality installation of panel - or bulkhead-mounted
connectors to installed cables/equipment. A range of LEMO
patchcords is available as shown with a number of possible
connections to other industry standard connectors. Alternatively
the LEMO F2 to LEMO F2 patchcord can be cut in half for use in
fibre splicing. The LEMO F2 contacts in the part numbers shown
here all come with an alignment sleeve enabling use with both
plugs or sockets (where male contacts are required the alignment
sleeve can be retained as a spare).
Component description
For information on other HD Fibre products or connectors from LEMO,
please visit our website www.lemo.co.uk
LEMO UK Ltd
Unit 15 & 16, Hazelwood Trading Estate,
Worthing, West Sussex, BN14 8NP.
Tel: 01903 234543
Fax: 01903 206231
e-mail: uksales@lemo.com
www.lemo.co.uk
Part Number
LEMO F2 to FC/PC patchcords 1m long
UKF.F2.A90.000100
LEMO F2 to SC patchcords 1m long
UKF.F2.A91.000100
LEMO F2 to ST patchcords 1m long
UKF.F2.A92.000100
LEMO F2 to LEMO F2 patchcords 1m long
UKF.F2.A93.000100
LEMO F2 to SC patchcords 1m long
UKF.F2.A94.000100