technical depliant

CREMATORIA OVENS
FOR PET ANIMALS
ciroldi.it
ciroldi
FORNI CREMATORI - PRODOTTI INOX - SVERNICIATORI - INCENERITORI
CREMATORIA OVENS
FOR PET ANIMALS
STATIC OVENS FOR THE CREMATION OF REMAINS
OF PETS.
The “MINITRANSIT” series ovens are horizontal static combustion chamber crematoria that are characterised by their particular design, which enable
performing, simultaneously and in a single solution,
both of the cremation of one single animal and the
indistinct incineration of several remains for which preservation of the remains is not necessary.
In order to optimise its use and to limit the costs of management, the system can in fact also
only be activated when a quantity of material equal
to the maximum load capacity has been introduced into the combustion chamber , whether this involves cremating both individually or collectively.
The systems of the “MINITRANSIT” series were conceived to meet the demand, specifically expressed,
both of individuals (e.g., pet cemeteries or centres
affiliated with a network of veterinary facilities) and of
institutional entities involved in the control of strays,
for a low-capacity system that allows exploitation of
the economic impact resulting from the demand for
cremations of individual pets. This does not however preclude the possibility of meeting the demand
for collective cremation on a small scale and/in relation to the problems imposed by preventive control .
The “MINITRANSIT” system, starting from those traditional technologies already widely tested and of proven
reliability, enables the practical realisation of the need
referred to above in respect of the most recent national and Community health (Regulation no. 1774/2002
CE ) and environmental provisions, ensuring:
• Gaseous emissions in compliance with
current legislation.
• Reduced consumption and management costs.
• Installation and quick and easy start-up.
• Low and simple to perform maintenance.
Except as required by current regulations regarding fire prevention, the “MINITRANSIT” series ovens do not require special peripheral building structures: their size and compact structure
will often allow installation in existing premises.
Scrubber type fume abatement
Electrical control panel
THE RIGHT CHOICE
FOR YOUR WORK
MODEL
UNIT OF
TECHNICAL SPECIFICATIONS
A
B
C
D
E
F
G
H
I
J
K
L
N.B:
Oven type
Operation
Design hourly destructive capacity
Load per cycle
Combustion chamber volume
Post-combustion volume
Overall dimensions
G1 Width
G2 Length
G3 Length with doors open
G4 Height (at the outlet of the post-combustion)
Stack features
H1 Diameter
H2 Height
Weight
Burner type (*)
J1
Primary
J2
Secondary
Installed power
Supply voltage
MEASUREMENT
300
550
=
=
Kg/h
Kg/cycle
m3
m3
20
60
0,32
0,45
40
120
0,6
0,9
mm
mm
mm
mm
2250
2000
2950
2450
2450
2260
3420
2730
mm
m
Kg
combust.
KW
KW
KW
V/Hz
static
“batch”
400
480
7
7
3000
4500
diesel - methane - LPG fuel
95
200
165
300
2,75
3
three-phase 240/400 - 50Hz
The values refer to the treatment of waste with p.c.i . of 950 Kcal/h max and max humidity of 70%. By cycle it is meant the sum of the times required for heating, the incineration of waste and the period for forced cooling of the oven
before the opening and the insertion of a new load. None of the information contained in this specification is binding; Ciroldi S.p.A. reserves the right to make any modifications, while retaining the principles of operation indicated.
(*) The burner can also be supplied, upon request, with natural gas or LPG.
Ciroldi S.p.A, with headquarters in Modena (Italy), has operated for fifty years in the design, construction and installation of facilities for general incineration
and for the waste-to-energy incineration of various types of solid, organic and industrial waste. In addition to the systems mentioned above, in relation
to which there are hundreds of structures in Italy and
worldwide, also thanks to the remarkable experience
gained in this field, a comprehensive range of systems
has been developed for the cremation of human remains and the remains of pets, whose advantages
are represented by solidity, compactness, high technological and functional level as well as full compliance with the most stringent environmental regulations.
INNOVATIVE
TECHNOLOGY
TECHNICAL LEGEND
1. Combustion chamber
2. Twin door loading/unloading of ashes
3. Combustion chamber burner
4. Thermocouple cremation chamber
5. Post-combustion
6. Post-combustion burner
7. Combustion burner thermocouple
8. Combustion air fan
9. Smokeblock device
10. Water tank for Smokeblock
11. Smokeblock nozzles pump
12. Stack
13. Electrical cabinet and control panel
14. O2 sensor detection
CREMATORIA OVENS
FOR PET ANIMALS
MINITRANSIT
crematorium oven for pets
chosen by municipal entities
and by authorised private
individuals
Officine Meccaniche Ciroldi S.p.A.
Via Nazionale per Carpi, 1591 - 41123 Modena (loc. Ganaceto) - Italy
T. +39 059 386012 - F. +39 059 386215
ciroldi@ciroldi.it - www.ciroldi.it
ciroldi
FORNI CREMATORI - PRODOTTI INOX - SVERNICIATORI - INCENERITORI