product brochure
Transcription
product brochure
GreenPeak GP691 Version 1.04 ZigBee Home Automation Communications Controller The GP691 ZigBee Home Automation Communications Controller provides a fully integrated solution for ultra low power wireless communications for smart home appliances. It is compliant with the IEEE Standard 802.15.4, providing robust spread spectrum data communication with a secure encrypted data flow. Its superior Wi-Fi interference rejection and antenna diversity offer additional robustness in a crowded wireless 2.4 GHz environment. The GP691 features a radio transceiver, integrated real-time Medium Access Control processor, integrated microcontroller, RAM and Flash memory, security engine, event scheduler, and an extensive set of peripherals. The integrated RF filtering simplifies the RF design complexity enabling very low cost single layer applications using simple PCB antennas requiring no shielding and a minimum number of external components. Advanced power management features ensure that power consumption is minimized in active as well as in standby states, enabling maintenance free and very small form factor products. The GP691 is capable of running the full stack and application for ZigBee Pro applications, including ZHA and ZLL. Its 2 internal microcontroller can communicate with external devices via UART, SPI or I C interfaces. Chip Overview and Key Features Excellent range through antenna diversity Ant.1 Ant.2 2.4 GHz IEEE 802.15.4 Radio IEEE 802.15.4 Real-Time MAC Robust to Wi-Fi Interference Packet Input / Output Packet-in-packet resynchronization Data Memory Program Memory 16 Kbyte RAM 248 Kbyte Flash I2C Slave UART I2C Master 16/32 bits Keyboard Scanner AES-CCM* G P I O XAP5™ high performance microcontroller IR Generator Power Management 32 MHz Supporting intermitted energy sources and coin cell batteries GreenPeak Technologies is a fabless semiconductor company offering innovative ultra low power wireless and battery-free data communication technologies for consumer electronics and sense and control applications. Battery Monitor Security Engine Timing & Control 2 UART, SPI and I C serial peripheral interfaces SPI Master MCU Hardware accelerated AES and CCM* encryption SPI Slave LED Generator ADC Timer / PWM Engine 4 LED generator with individual PWM support Watchdog Full internal IO pull-up / pull-down support during active and standby states GreenPeak Technologies B.V. The Netherlands +31 30 262 1157 info@greenpeak.com www.greenpeak.com GP691 ZigBee Home Automation Communications Controller Low Cost Excellent Range and Reliability The GP691 is designed to operate on very low cost, single layer, paper phenol like PCB material using only low cost components and printed circuit antennas. No expensive shielding, chip antennas or voltage regulators are required to design a high performance Home Automation application. The integrated microcontroller and program memory allow for fully integrated, single chip applications and the integrated Real-Time MAC greatly reduces software complexity and improves stability. The GP691 has been optimized for reliable communication in harsh radio environments. The -96 dBm receiver sensitivity allows extended coverage. Built-in antenna diversity with two antennas improves the reliable link budget by 9 dB resulting in approximately twice the reliable range compared to similar systems with only one antenna. In high density networks the packet-in-packet resynchronization further improves the communication reliability. The potential risks of interference by Wi-Fi and/or Bluetooth devices have been reduced by the combination of excellent receiver dynamic range and an auto tuned band-pass filter. Ultra Low Power Consumption The GP691’s advanced integrated energy management system allows it to operate from a standard lithium coin cell battery, like the CR2032, as well as from intermittent power supplies like photovoltaic (solar), electro-mechanical and piezoelectric, with a minimum of additional components. It includes ultra low power voltage level detectors and overvoltage protection circuitry, allowing safe operation and graceful shutdown. The battery lifetime monitor tracks the usage of the battery and provides an early exhaustion warning. Electrical Characteristics Standards compliant IEEE802.15.4-2003 IEEE802.15.4-2006 Radio Regulations compliant ETSI EN 300 328 FCC CFR-47 Part 15 ARIB STD-T66 Frequency Band Channels Modulation Chip rate Data Rate 1 Receiver Sensitivity 2 Antenna diversity gain 2400 – 2483.5 MHz 16 (programmable, 5 MHz step size) IEEE802.15.4 2 Mchip/s 250 kbit/s -96 dBm typical 9 dB (increases the 'effective' receiver sensitivity to -105 dBm) Transmit Power +7 dBm (adjustable down in 1 dB steps) 32.000 MHz (±40 ppm) Radio Management Antenna Diversity Digital RSSI Link Quality Indication QFN-32, 5x5 mm -40 to +85°C (industrial) -50 to +150°C 260°C (10 s max) RoHS 1) At 3.0V and 25°C, unless specified otherwise. 2) For typical indoor usage in an environment with 50 ns delay spread and 2 MHz signal bandwidth using the Rayleigh fading model: antenna diversity with 2 antennas results in a 9 dB improved link budget at a 1% outage probability compared to no antenna diversity. The 9 dB in link budget translates into 80% more range, if using a two slope range model with the breakpoint at 10m and g1 = 2, g2 = 3.5. 1 µA 760 µA 1 Operational Currents Receive Transmit (at 0 dBm) 12 mA 18 mA Supply Voltage 1.8 to 3.6 V Interfaces Programmable GPIO lines 15 (QFN-32) Analog input lines 2 (QFN-32) 20mA output drive GPIO 1 LED output lines 4 2 SPI Master, I C Master, and UART peripheral interfaces High speed programming interface Control for external LNA and/or PA Crystal Frequency General Characteristics Package Operating Temperature Storage Temperature Soldering Temperature Compliance GreenPeak Technologies’ reference designs, development kits, software libraries and production platforms provide a quick time-to-market solution for sensor and control devices for Home Automation networks. Radio Characteristics 1 Standby Mode Currents Using internal RC oscillator Using crystal oscillator Reference Designs, Tools and SW This document is the property of GreenPeak Technologies. Information provided in this brochure is subject to change without prior notice and does not form part of an offer or contract.