HVLP Spray Guns

HVLP Spray Guns
Your solution for the best finish...
• Produce high quality finishes in all applications:
- High production
- Spot & panel refinishing
- Restoration
• Increased transfer efficiency means less wasted material
• Excellent atomization with reduced paint overspray
• Easy to handle due to ergonomic design and low weight
• Higher application rate and transfer efficiency
• Professional quality at affordable pricing
• Easy to clean and maintain
#6617
1.7 MM
Gun Ordering Inforamtion:
6613 1.3 HVLP Spray Gun
1/case
6614 1.4 HVLP Spray Gun
1/case
6617 1.7 HVLP Spray Gun
1/case
6618 1.0 HVLP Spray Gun
Touch Up Gun
(Not pictured)
1/case
See reverse side for additional HVLP
gun accessories
#6614
1.4 MM
#6613
1.3 MM
2040 Heiserman Drive
Brighton, MI 48114
(tel): (800) 824-2843
(fax): (800) 477-7923
Email: info@tat-co.com
Website: www.tat-co.com
HVLPFlyer-16097-Transtar.p65
1
11/10/05, 5:07 PM
DESCRIPTION:
Transtar HVLP professional spray guns are designed to produce high quality finishes in all applications...high production,
spot & panel refinishing and vehicle restoration. FOR PROFESSIONAL TOP QUALITY FINISHES.
TECHNICAL DATA:
Clear Coat & Color Gun HVLP (1.3 mm) Part #6613
• This is perfect for applying basecoats, clear coats and
single stage top coats.
Clear Coat & Color Gun HVLP (1.4 mm) Part #6614
• Provides excellent atomization of color and clear coats for
optimum coverage and leveling capabilities.
Primer Gun HVLP (1.7 mm) Part #6617
• Excellent for solvent and waterborne primers, finishing
fillers and self-etching primers and other fill and build
coatings.
Touch Up Gun HVLP (1.0 mm) Part #6618
• Excellent for use in touch-up, jamb areas and detail
applications.
1.3/1.4/1.7 HVLP Spray Guns:
Spray Set-Up
1.3MM (6613) 1.4MM (6614) 1.7MM (6617)
Color
6613 (black)
6614 (blue)
6617 (green)
Gun Weight
17 oz. (482 g)
Air Intake
1/4”
Inlet Pressure
50 PSI (max.)
Max Pressure
10 PSI (@aircap) or 43 PSI (@ regulator)
Air Consumption 80-225 L/m
Spray Width
12”
Cup Type/Capacity Aluminum (600ml)
Touch Up HVLP Gun:
Spray Set-Up
1.0MM
Color
6610 (silver)
Gun Weight
11.3 oz. (320 g)
Air Intake
1/4” BSP
Inlet Pressure
43 PSI (max.)
Max Pressure
10 PSI (@aircap)
Air Consumption 105 L/m
Cup Type/Capacity Aluminum (125ml)
SET UP AND ADJUSTMENT:
ACCESSORIES:
1. Starting
a. Use the spanner wrench to tighten the fluid nozzle.
b. Tighten the air cap and paint cup.
c. Check air lines and fittings to ensure that they are clean and
damage free before connecting to gun.
d. Flush gun thoroughly with cleaning solvent.
2. Fan adjustment
Use the fan adjustment control on the left side of the gun to obtain
the desired pattern.
3. Air adjustment
Air pressure can be adjusted using the air adjustment knob on the
bottom of the gun or by using #6620 Air Regulator.
4. Fluid adjustment
Use the fluid control knob to obtain the desired fluid flow volume.
6600
6601
6603
6604
6607
6608
6615
6620
6625
6630
6631
6632
6633
6634
6635
6640
6641
6642
MAINTENANCE:
1. Changing of air cap, fluid nozzle and needle – to assure proper
fit and performance always change as a matched set.
2. Changing of needle packing – the needle is sealed using a Teflon
packing, to change the packing remove the fluid needle, fluid
nozzle and the packing nut. For 6618, a narrow, flat head screwdriver
is required to remove the packing nut, and for 6614/6617, a 7mm
socket is needed to remove the nut.
3. Cleaning and gun care
a. After using immediately flush with solvent to remove all
coatings.
b. Clean the air cap with the brush provided.
c. Lightly lube all moving part with a non-petroleum based
lubricant.
Note: Never use improper cleaning instruments as they may damage
the part and adversely affect gun performance. Never immerse the
gun in solvent.
HVLPFlyer-16097-Transtar.p65
2
Rebuild Kit for 6613/6614/6617
Rebuild Kit for 6618
HVLP Needle Nozzle Kit 1.3
HVLP Needle Nozzle Kit 1.4
HVLP Needle Nozzle Kit 1.7
HVLP Needle Nozzle Kit 1.0
Air Cap Test Gauge 1.3/1.4/1.7 HVLP Guns
Air Regulator
Air Cap Test Gauge 1.0 HVLP Guns
1000cc Aluminum Cup
600cc Aluminum Spray Cup w/ Lid
125cc Aluminum Spray Cup w/ Lid
600cc Plastic Spray Cup w/Lid
Magnetic Spray Gun Holder
Mesh Spray Gun Filter for HVLP Guns (6 pack)
1000cc Aluminum Cup Lid
Spray Gun Filter (Ball Type) Single Pack
Spray Gun Filter (Ball TYpe) Multi Pack (Display)
#6620
#6634
#6642
2040 Heiserman Drive • Brighton, MI 48114
Tel: (800) 824-2843 • Fax: (800) 477-7923
email: info@tat-co.com
Z625 Rev 12/03
11/10/05, 5:07 PM
1/case
1/case
1/case
1/case
1/case
1/case
1/case
1/case
1/case
1/case
1/case
1/case
1/case
1/case
6/case
1/case
6/case
1/case