Brochure - secoamerica.com

SECO GROUP USA
MOWS WHERE OTHERS CAN’T
DURABLE, AFFORDABLE,
PROFITABLE PERFORMANCE
BUILT TOUGH TO TAME OVERGROWN,
OUT-OF-CONTROL TERRAIN
TALL
GRASS
WEEDS
& BRUSH
UP TO
1.5-INCH
SAPLINGS
From tall grass, weeds and overgrown brush to rough terrain you might think only walk-behind or hand-held equipment
could reach, the Goliath 4x4 delivers professional-grade performance, enhanced traction, superior stability and maximum
productivity in virtually any environment, including wet conditions. That’s why Goliath is the go-to machine in the rental
industry, creating a whole new category of brush cutting solutions between labor-intensive walk-behind equipment and
more costly skid steers with tow-behind brush cutters. Goliath has created proven demand among:
•
•
•Municipalities
•
•
Landscape Contractors
Private Homeowners
• Hobby Farmers
•
Large Estate Owners
Trail Maintenance Staff
• Commercial Developers
•Schools/Universities
•
•
Golf Courses/Clubs
Ski Resorts
Christmas Tree Farms
• Small Forestry Landowners
In fact, many of these customers eventually purchase a machine for themselves, due to Goliath’s amazing performance
and utility. That’s no surprise, given its heavy-duty ATV body style, which hugs the terrain to power through the most
difficult conditions with ease. Goliath makes quick work of out-of-control vegetation — even saplings up to 1.5 inches
in diameter are no match for this durable machine!
DESIGNED TO STAY IN THE FIELD GENERATING REVENUE
Turnaround from job to job is easy with Goliath, since it’s built with the strength to withstand the most rugged terrain
and applications, along with the ease of maintenance that minimizes work between uses. Every feature is designed
to elevate performance, extend service life and eliminate potential damage during operation.
SUPERIOR TRACTION,
POWER AND HANDLING
DEPENDABLE POWER
FOR TOUGH JOBS
THE FEELING OF
POWER STEERING
Goliath’s all-terrain tires, balanced weight
distribution and an ultra-low center of gravity
provide superior traction and stability in challenging
conditions — including slopes up to 22 degrees.
Low parasitic loads and ample power propel
Goliath through overgrown and out-of-control
areas with ease.
Revolutionary Powerwheel steering system provides
intuitive and precise steering with one or both hands
to make quick work of tough mowing applications.
Choose from commercial-grade, pressure-lube
and filter 23-hp Vanguard or 26-hp FS730V
Kawasaki engines.
Operators compare Goliath’s easy handling ability
to power steering, which enhances reaction time
and maneuverability.
An advanced, commercial-grade hydrostatic
drive system designed for rugged, cross-terrain
use delivers on-demand four wheel drive that
controls tire speed, minimizes turf damage
and enhances maneuverability.
A lever-actuated, on-demand differential lock pulls
Goliath through areas too moist, overgrown or steep for
most traditional mowers or walk-behind brush cutters.
Dual-element air cleaner filtration and pre-cleaners
extend engine life in dusty conditions.
1
Front grille protector wraps under the front of
the unit to shield components and protect the
steerable front axle.
2
Rugged deck reinforcement, including heavy-duty
steel rods and lateral fins, protect the sides and
front edge of the deck from damage.
3
Rear hydrostatic transmission oil cooler and
cooling fans reduce operating temperatures
and extend transmission service life.
4
Comfortable, easy-access design features
a foam-padded adjustable seat and extra
operator legroom.
5
Both sides of the cutting deck feature hinged
segments that rotate up to facilitate simplified
cleaning and blade tip replacement for quick
turnaround between jobs.
6
Transaxle shroud reduces material buildup
and protects transmission seals.
3
4
6
2
5
1
2
3
6
1
ROUGH CUT OR
REAR-DISCHARGE/MULCHING OPTIONS
VERSATILE, YEAR-ROUND
PERFORMANCE
COMFORTABLE OPERATION
FOR EXTENDED MOWING
Goliath comes equipped with a 36-inch rough cut
deck designed to easily cut through heavy grasses
or thick vegetation.
Goliath can also be equipped with an optional manual
47-inch bidirectional, spring-loaded dozer blade.
Comfortable, foam-padded adjustable seat
features foldable armrests for easier operation
and reduced fatigue.
Solid steel, high-carbon blades with reversible
swing-back tips are tempered and hardened to stay
sharp for extended periods of heavy-duty cutting.
Optional 43-inch or 52-inch rear-discharge mulching
decks deliver the same heavy-duty performance in
heavy grasses with a higher quality finish, and can
be installed in less than 60 minutes.
Constructed of heavy-duty steel, the blade can be
positioned straight and 15 or 30 degrees to both
left and right.
Well-positioned operational controls include an
hour meter, PTO switch, key ignition, push-button
cruise control and both halogen and LED lights.
A height adjustment stop can be installed on the
console to limit the lower cutting range of the rough
cut deck.
A grade gauge, mounted on the foldable rollover
protective structure, lets you easily monitor
steepness of slopes.
SPECIFICATIONS
• STANDARD
−
NOT AVAILABLE ° OPTIONAL
MODELS
MODELS
GC 92/36 GC 92/36
Vanguard Kawasaki
GC 92/36 GC 92/36
Vanguard Kawasaki
ENGINE
Type/Horsepower, Cylinders, Displacement:
B&S Vanguard 23 hp V-Twin, 627 cc
Kawasaki FS730V 26 hp V-Twin, 726 cc
Crankshaft/Lubrication System: Vertical/Pressure Lube, filter
•
−
•
−
•
•
Fuel: Gasoline - unleaded
•
•
Fuel Capacity: 4.2 U.S. gallons
•
•
Air Cleaner: Dual element air filtration
•
•
•
•
•
•
•
•
•
•
•
•
•
•
°
°
DECKS
STANDARD 36-IN. ROUGH CUT
Construction: 3-gauge reinforced front section. Spring-loaded
foldup sides with 6-gauge reinforcements. Front side chains for
higher grass input. Rubber shield for rear axle protection.
Blades (Tempered, alloy steel): 7.7-in.-long, 0.24-in.-thick,
heavy-duty hardened reversible swivel tip flail blades mounted on
24.8-in.-long hardened spring steel bar, 0.23 in. thick.
Spindle Assemblies & Housing: 3.5 cm (1.37 in.) O.D. shaft. Double
sealed bearings and shaft seals, welded steel housing.
Blade drive: Belt with single Kevlar V-belt and idler arm tensioning.
Cutting height: 2 in. to 5.3 in. (4 cutting height positions)
Clearance under mower deck: 6.3 in. (transport position)
OPTIONAL 43-IN. AND 52-IN. REAR DISCHARGE/MULCHING
43-in. Deck Construction: 6-gauge reinforced front edge. 3-gauge
shell + laminate across spindle plane with flange reinforcements.
6-gauge welded suspension brackets. Front side chains for higher
grass input. Rubber shield for rear axle protection.
Blades (Tempered, alloy steel): 0.20-in., hardened 15.7-in.-long
high mulching blades with medium lift tips. Two blades per spindle,
6 blades total.
52-in. Deck Construction: 6-gauge reinforced front edge. 3-gauge
shell + laminate across spindle plane with flange reinforcements.
6-gauge welded suspension brackets. Front side chains for higher
grass input. Rubber shield for rear axle protection.
Blades (Tempered, alloy steel): 0.20 in., hardened 18.5-in.-long
high mulching blades with medium lift tips. Two blades per spindle,
6 blades total.
Spindle Assemblies & Housing: 2.5 cm (.98 in.) O.D. shaft. Double
sealed bearings and shaft seals, welded steel housing.
Blade drive: Belt with single Kevlar V-belt and idler arm tensioning.
°
°
−
°
−
°
°
°
°
°
°
°
°
°
Maintenance-Free Battery/Starter: 12V / solenoid shift
•
•
Ignition: Breakerless
•
•
Interlock System: Prevents engine start when brake pedal is not
engaged. Allows operator dismount without engine shutdown only
when PTO is disengaged and parking brake is set.
•
•
Cutting height: 1.6 in. to 4.9 in. (4 cutting height positions)
Clearance under mower deck: 5.9 in. (transport position)
STARTER & ELECTRICAL SYSTEM
OPERATOR STATION
Seat: Foam-padded vinyl, adjustable position, foldable armrests
and coil spring suspension with seat belt.
Console-Mounted Instruments: Low engine oil pressure, parking
brake, battery voltage, fuel level, cruise control, deck engagement
lights and ignition & PTO switch.
Work Lights: Halogen 2 x 20W + LED diode. Front white, rear red.
Hour meter: Standard with service function.
TRANSMISSION & STEERING
Type: Tuff Torq K664E rear hydrostatic transaxle in aluminum die
cast housing with heat-treated steel gears, 10 cc pump and 10 rev
motor displacement, 1-in. axle shaft, mechanical differential lock,
oil cooler with cooling fan. Tuff Torq/Kanzaki steerable KXH10N
front axle with 10 cc fixed and 10 rev variable motor displacement.
Transmission Fluid: SAE 5W50 Synthetic Motor Oil
Filtration: 25 micron oil filter
Speed: 0-6.0 mph forward and 0-4 mph reverse
Turning radius: 33-1/2 in.
Steering: 12.5-in. diameter with knob, adjustable up and down.
Brakes: Wet disc, internal
TIRE SIZE
Front wheels (4 ply rating): 16 x 6.50 - 8 Ag/bar tread
Rear wheels (4 ply rating): 20 x 10.50 - 8 Ag/bar tread
DIMENSIONS & WEIGHT
Width (Including deck):
36-in. rough cut deck: 40.9 in.
43-in. rear discharge/mulching deck: 45.7 in.
52-in. rear discharge/mulching deck: 52.6 in.
Height (ROPS): 69.2 in.
Height: Seat back 40.6 in., Seat cushion 26.4 in.
Wheelbase: 58.3 in.
Weight (Including deck):
36-in. rough cut deck: 910 lbs.
43-in. rear discharge/mulching deck: 934 lbs.
52-in. rear discharge/mulching deck: 972 lbs.
OPTIONAL DOZER BLADE
Type: Front-mounted, multipurpose dozer blade, reversible.
Total width: 47.2 in.
Clearing Angle: Straight ahead or 15 and 30 degrees right or left.
Directional Control: Manual
Lift: Hand-controlled lever for proper height adjustment.
Lift range: 0 to 8.4 in.
Weight (Uncrated): 93 lbs.
OPTIONAL HEAVY-DUTY WINCH
Capacity: 2,500 lbs.
Cable: 45.9 feet long with 4.8-mm diameter
Weight (Uncrated): 19 lbs.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
°
°
°
−
•
•
•
•
•
•
•
•
°
−
°
°
°
°
°
°
°
°
°
°
°
°
°
°
°
°
°
°
°
°
°
°
For a complete listing of engine manufacturer power rating information, visit www.secogroup.cz. Mower features and
specifications are subject to change without notice. All photos are a representation of the product; actual product may differ.
SecoAmerica.com
Seco Group USA LLC | 58 Mimosa Court | Ridgefield, CT | 203.894.1001 | info@secoamerica.com
Goliath 4x4® is a registered trademark of Seco Group LLC a.s. Vanguard, Kawasaki and Tuff Torq are registered trademarks of their respective companies. © Seco Group 2015.