Coulters • Injection Kits • Knife Accessories

Coulters • Injection Kits • Knife Accessories
E0452
Yetter
Fertilizer Sealers & Injection Kit
Farm Equipment
Fertilizer Injection Kit: The
2910 Fertilizer Injection Kit is a
cost-effective unit for the deep
placement of liquid fertilizer. It
fits both 17" and 20" blades
and is available with a clamp
kit to make it adaptable to fit
many coulters.
D
Disc Sealer: The spring-loaded
disc sealer closes the knife slot by
redistributing soil and residue over
the strip. Its adjustable blades can
be positioned to push or pull the soil
depending on specific applications or
soil conditions. Stocked with 12" and
16" smooth blades. (Notched blades
are available for no till applications).
Part No.
Wt.
Net Ea.
YM 2920-012 12" Disc Sealer......... 40 lbs. $ 215.50
YM 2920-016 16" Disc Sealer......... 43 lbs. 255.50
YM 2910-114 Fertilizer Injection Kit 14 lbs.
79.50
2910-114
Fertilizer Injection Kit
Yetter Rolling Coulter
Yetter Coulters are adaptable to chisel plows, field cultivators and NH3
applicators. For use in trashy ground. Universal mounting hardware for
4" x 4" or 4" x 6" tool bars included (2931-20 fits 5x7 or 7x7 bars with C
shank). 17" or 20" ripple blades with straight or offset shanks available. See
selection guide.Tapered roller bearings are lubricated, sealed and adjustable.
The malleable iron spring cushion feature will reduce damage by rocks and
obstructions. 600 lbs. down pressure.
D
2920-016
Disc Sealer
shown with optional knife & shank
Chromium Carbide Inserts
Point Inserts
D
CI-2 for
NH3 Knives
C I -2 Chromium-Carbide
KNIFE POINT INSERT is
7-1/2" high with 3-1/2" long
wrap-around.
Fits WIESE Knives only.
Beaver Tail Sealer Wings
These 3" x 3" forged Beaver Tail sealers can be
installed on most NH3 knives. Use AS75 on knives
with a 1/2” or 3/4” profile. AS75N is available for
3/8” profile knives. Usually installed 3” or 4” above
the tube outlets at a slight downward angle.
D
2930 Straight Shank
2950 Offset Shank
Yetter
Farm Equipment
DEPTH
"A"
TB79
For use with spring shanks
BFRONT
D
BRACKET
WIDTH
C
CLEARANCE
DEPTH
4"x4"
REF.
HEIGHT
17"
REF.
HEIGHT
17"
AHEIGHT
HEIGHT
"B"
Tube Assembly is center mount and can be
used for liquid or NH3 Applications with field
cultivators or chisel plows. The 3/8" O.D. tubes
is closed and drilled.
FILL IN YOUR
PLOW'S
DIMENSIONS:
A
B
C
D
Is the frame 4" x 4" or larger.
blade size
Replacement Tube
Is there 4" or more clearance on at least one side of each bracket?
On implements where dimension
"B" is between 25" and 31", a
17" blade is recommended. 20"
blades should be used where
dimension "B" is taller than 31".
If dimension "A" is 20" or less,
it is necessary to use the 2950
disc-chisel to offset the blade
forward. In this case, be sure to
check clearance in front of main
frame. (Approximately 9-3/4")
Part No.
YM 2930-17
YM 2930-20
YM 2950-20
YM 2931-20
YM 2571-167
YM 2571-168
YM 2571-165
YM 2571-199
CLEARANCE
AS75
Tube Assembly
Selection Guide
For use with rigid shanks
D
Is dimension "A" 26" or more?
Is chisel plow spring shank bracket width 8" or less?
Is dimension "D" more than 24"?
W12
If bracket width "C" is 8", is "B" 2-1/2" or less? or
If bracket width "C" is 7", is "B" 4-3/4" or less? or,
If bracket "C" is 6", is "B" 5-3/4" or less?
If all of the above are checked "yes", the proper coulter
may be selected by referring to the chart below. If any of
the above were not checked, the coulters will not fit.
Dimensions "D"
24" to 26"
26" +
YETTER Coulters
17" Straight Shank................................
20" Straight Shank................................
20" Offset Shank..................................
20” Straight Shank for 5x7 or 7x7 Bars.
17" Ripple Blade...................................
20" Ripple Blade...................................
17" Notched Blade................................
20" Smooth Blade.................................
DULTMEIER SALES • OMAHA, NE
Number
2950-017
2950-020
Wt.
78 lbs.
84 lbs.
88 lbs.
88 lbs.
12 lbs.
15 lbs.
12 lbs.
15 lbs.
W34 Tube is 3/4" x 12" open end.
DISCOUNT
Wt.50 or More
Part No.
Lbs. One Number Net Ea.
WC CI-2Insert.................................1
5%
$ 9.58
WC AS75
Sealer Wing....................... 1/2 5%
5.00
WC TB79
Center Mount Tube Assembly1
5%
9.27
WC W12
Replacement Tube.............1/4
5%
2.96
WC 1212F
1/2" x 12" Knife Tube Open -
5%
4.16
WC W34
3/4" x 12" Knife Tube Open -
5%
8.37
Net Ea.
$ 250.00
255.00
282.50
245.50
40.85
49.60
36.80
58.65
(800) 228-9666
W12 Tube is 3/8" x 12" closed and drilled. 1212F Tube is 1/2" x 12" open end.
•
www.dultmeier.com
• DAVENPORT, IA
(800) 553-6975
E0452