Symantec™ Data Loss Prevention System Requirements and

Transcription

Symantec™ Data Loss
Prevention System
Requirements and
Compatibility Guide
Version 12.5.x
Last updated: 27 February 2015
Symantec Data Loss Prevention System
Requirements and Compatibility Guide
Documentation version: 12.5g
Last updated: 27 February 2015
Legal Notice
Copyright © 2015 Symantec Corporation. All rights reserved.
Symantec, the Symantec Logo, and the Checkmark Logo are trademarks or registered
trademarks of Symantec Corporation or its affiliates in the U.S. and other countries. Other
names may be trademarks of their respective owners.
The product described in this document is distributed under licenses restricting its use, copying,
distribution, and decompilation/reverse engineering. No part of this document may be
reproduced in any form by any means without prior written authorization of Symantec
Corporation and its licensors, if any.
THE DOCUMENTATION IS PROVIDED "AS IS" AND ALL EXPRESS OR IMPLIED
CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
NON-INFRINGEMENT, ARE DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH
DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. SYMANTEC CORPORATION SHALL
NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION
WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS DOCUMENTATION. THE
INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE
WITHOUT NOTICE.
Symantec Corporation
350 Ellis Street
Mountain View, CA 94043
http://www.symantec.com
Technical Support
Symantec Technical Support maintains support centers globally. Technical Support’s
primary role is to respond to specific queries about product features and functionality.
The Technical Support group also creates content for our online Knowledge Base.
The Technical Support group works collaboratively with the other functional areas
within Symantec to answer your questions in a timely fashion. For example, the
Technical Support group works with Product Engineering and Symantec Security
Response to provide alerting services and virus definition updates.
Symantec’s support offerings include the following:
■
A range of support options that give you the flexibility to select the right amount
of service for any size organization
■
Telephone and/or Web-based support that provides rapid response and
up-to-the-minute information
■
Upgrade assurance that delivers software upgrades
■
Global support purchased on a regional business hours or 24 hours a day, 7
days a week basis
■
Premium service offerings that include Account Management Services
For information about Symantec’s support offerings, you can visit our website at
the following URL:
www.symantec.com/business/support/
All support services will be delivered in accordance with your support agreement
and the then-current enterprise technical support policy.
Contacting Technical Support
Customers with a current support agreement may access Technical Support
information at the following URL:
Before contacting Technical Support, make sure you have satisfied the system
requirements that are listed in your product documentation. Also, you should be at
the computer on which the problem occurred, in case it is necessary to replicate
the problem.
When you contact Technical Support, please have the following information
available:
■
Product release level
■
Hardware information
■
Available memory, disk space, and NIC information
■
Operating system
■
Version and patch level
■
Network topology
■
Router, gateway, and IP address information
■
Problem description:
■
Error messages and log files
■
Troubleshooting that was performed before contacting Symantec
■
Recent software configuration changes and network changes
Licensing and registration
If your Symantec product requires registration or a license key, access our technical
support Web page at the following URL:
Customer service
Customer service information is available at the following URL:
Customer Service is available to assist with non-technical questions, such as the
following types of issues:
■
Questions regarding product licensing or serialization
■
Product registration updates, such as address or name changes
■
General product information (features, language availability, local dealers)
■
Latest information about product updates and upgrades
■
Information about upgrade assurance and support contracts
■
Information about the Symantec Buying Programs
■
Advice about Symantec's technical support options
■
Nontechnical presales questions
■
Issues that are related to CD-ROMs, DVDs, or manuals
Support agreement resources
If you want to contact Symantec regarding an existing support agreement, please
contact the support agreement administration team for your region as follows:
Asia-Pacific and Japan
customercare_apj@symantec.com
Europe, Middle-East, and Africa
semea@symantec.com
North America and Latin America
supportsolutions@symantec.com
Contents
Technical Support ............................................................................................... 3
Chapter 1
About this guide .................................................................... 8
About updates to Symantec Data Loss Prevention system
requirements ........................................................................... 8
Chapter 2
System Requirements and Recommendations ............. 10
Deployment planning considerations ................................................
About installation tiers .............................................................
The effect of scale on system requirements .................................
Minimum system requirements for Symantec Data Loss Prevention
servers .................................................................................
Small organization minimum hardware requirements .....................
Small/medium enterprise minimum hardware requirements .............
Large/very large enterprise minimum hardware
requirements ...................................................................
Operating system requirements for servers ..................................
Endpoint computer requirements for the Symantec DLP Agent ..............
Operating system requirements for endpoint systems ....................
Memory and disk space requirements for the Symantec DLP
Agent .............................................................................
Symantec Data Loss Prevention for Mobile requirements .....................
Supported languages for detection ...................................................
Available language packs ...............................................................
Oracle database requirements ........................................................
Browser requirements for accessing the Enforce Server administration
console ................................................................................
Requirements for using certificate authentication for single
sign-on .................................................................................
Virtual server and virtual workstation support .....................................
Virtual desktop and virtual application support with Endpoint
Prevent ................................................................................
...........................................................................................
Third-party software requirements and recommendations .....................
10
11
12
13
14
14
15
17
20
20
21
21
22
24
25
27
28
28
29
34
34
Contents
Chapter 3
Product compatibility ......................................................... 38
Environment compatibility and requirements for Network Prevent for
Email ...................................................................................
Proxy server compatibility with Network Prevent for Web ......................
Secure ICAP support for Network Prevent for Web using the stunnel
service .................................................................................
High-speed packet capture cards ....................................................
Data Insight compatibility with Symantec Data Loss Prevention version
12.5 .....................................................................................
Symantec Veritas Cluster Server compatibility ....................................
Symantec / Symantec Data Loss Prevention integrations ......................
Network Discover compatibility ........................................................
Supported file system targets ....................................................
Supported IBM Notes targets ....................................................
Supported SQL database targets ...............................................
Supported SharePoint server targets ..........................................
Supported Exchange Server Web Store connector targets ..............
Supported Exchange Server Web Services connector
targets ...........................................................................
Supported file system scanner targets ........................................
Supported Documentum (scanner) targets ...................................
Supported Livelink scanner targets ............................................
Supported Web server (scanner) targets .....................................
About Endpoint Data Loss Prevention compatibility .............................
Endpoint Data Loss Prevention supported operating
systems ..........................................................................
Endpoint Prevent supported applications .....................................
Mobile Prevent compatibility ...........................................................
Mobile Email Monitor compatibility ...................................................
38
39
40
41
41
42
42
44
45
46
46
46
47
47
48
48
48
49
49
49
51
55
58
7
Chapter
1
About this guide
This chapter includes the following topics:
■
About updates to Symantec Data Loss Prevention system requirements
About updates to Symantec Data Loss Prevention
system requirements
System requirements as described in this guide are occasionally updated as new
information becomes available. You can find the latest version of the Symantec
Data Loss Prevention System Requirements and Compatibility Guide at the following
link to the Symantec Data Loss Prevention knowledgebase.
https://www.symantec.com/docs/TECH221192
The following table provides the history of updates to this version of the Symantec
Data Loss Prevention System Requirements and Compatibility Guide.
Table 1-1
Change history for the System Requirements and Compatibility
Guide
Date
Description
27 February 2015
Added support for Red Hat Enterprise Linux 6.6. Added support for
Firefox 33.1, 34.0.5, and 35.0.1 with DLP Agent 12.5.2.
6 January 2015
Corrected browser support for Enforce Server administration console
access.
19 December 2014 Added support for Network Discover scanning of Oracle Database 12c
(12.1.0.2).
About this guide
About updates to Symantec Data Loss Prevention system requirements
Table 1-1
Change history for the System Requirements and Compatibility
Guide (continued)
Date
Description
5 December 2014
Added support for Network Discover scanning of Oracle Database 11g
(11.2.0.4). Added DLP Agent support for Apple Mac OS X 10.10. Added
support for running Mac DLP Agents on VMware Fusion. Added support
for Symantec Data Loss Prevention installations on Microsoft Windows
Server 2012 R2 and Red Hat Enterprise Linux 5.11. Added DLP Agent
support for Microsoft Windows Server 2012 R2. Added Endpoint Prevent
support for Microsoft Internet Explorer 11.
13 November 2014 Added support for Microsoft SQL Server 2014. Added support for IBM
Notes 9.0.x.
1 October 2014
Added support for Microsoft Active Directory 2012. Added support for
Single Server Installations on Red Hat Enterprise Linux 6.5 (64-bit).
29 September
2014
Added Discover target support for Microsoft Office SharePoint Server
2013 SP1 on Microsoft Windows Server 2012 R2. Added support for
Firefox version 32. Added support for Microsoft Windows 8.1 Update
2 Enterprise 64-bit operating system.
22 August 2014
Added support for Firefox version 30.
19 August 2014
Added Discover target support for Microsoft SQL Server 2008 R2 and
2012. Added support for Napatech driver version 4.26c.
14 August 2014
Added support for Single Server installations on Microsoft Windows
Server 2012. Added support for Firefox version 31.
17 July 2014
Corrected supported Squid proxy version. Clarified Secure ICAP
support. Corrected supported versions of Windows Server 2012.
17 June 2014
Added support for Firefox versions 28 and 29.
9
Chapter
2
System Requirements and
Recommendations
■
Deployment planning considerations
■
Minimum system requirements for Symantec Data Loss Prevention servers
■
Endpoint computer requirements for the Symantec DLP Agent
■
Symantec Data Loss Prevention for Mobile requirements
■
Supported languages for detection
■
Available language packs
■
Oracle database requirements
■
Browser requirements for accessing the Enforce Server administration console
■
Requirements for using certificate authentication for single sign-on
■
Virtual server and virtual workstation support
■
Virtual desktop and virtual application support with Endpoint Prevent
■
Third-party software requirements and recommendations
Installation planning and system requirements for Symantec Data Loss Prevention
depend on:
■
The type and amount of information you want to protect
System Requirements and Recommendations
■
The amount of network traffic you want to monitor
■
The size of your organization
■
The type of Symantec Data Loss Prevention detection servers you choose to
install
These factors affect both:
■
The type of installation tier you choose to deploy (three-tier, two-tier, or single-tier)
See “About installation tiers” on page 11.
■
The system requirements for your Symantec Data Loss Prevention installation
See “The effect of scale on system requirements” on page 12.
About installation tiers
Symantec Data Loss Prevention supports three different installation types: three-tier,
two-tier, and single-tier. Symantec recommends the three-tier installation. However,
your organization might need to implement a two-tier installation depending on
available resources and organization size. Single-tier installations are recommended
for branch offices, small organizations, or for testing purposes.
Single-tier
To implement the single-tier installation, you install the database, the
Enforce Server, and a detection server all on the same computer.
Typically, this installation is implemented when a small organization or
branch office needs a local deployment of Symantec Data Loss
Prevention. If you choose this type of installation, the Symantec Data
Loss Prevention administrator needs to be able to perform database
maintenance tasks, such as database backups.
Two-tier
To implement the two-tier installation, you install the Oracle database
and the Enforce Server on the same computer. You then install detection
servers on separate computers.
Typically, this installation is implemented when an organization, or the
group responsible for data loss prevention, does not have a separate
database administration team. If you choose this type of installation,
the Symantec Data Loss Prevention administrator needs to be able to
perform database maintenance tasks, such as database backups.
See “Minimum system requirements for Symantec Data Loss Prevention
servers” on page 13.
11
Three-tier
To implement the three-tier installation, you install the Oracle database,
the Enforce Server, and a detection server on separate computers.
Symantec recommends implementing the three-tier installation
architecture as it enables your database administration team to control
the database. In this way you can use all of your corporate standard
tools for database backup, recovery, monitoring, performance, and
maintenance. Three-tier installations require that you install the Oracle
Client (SQL*Plus and Database Utilities) on the Enforce Server to
communicate with the Oracle server.
See “Minimum system requirements for Symantec Data Loss Prevention
servers” on page 13.
The effect of scale on system requirements
Some system requirements vary depending on the size of the Symantec Data Loss
Prevention software deployment. Determine the size of your organization and the
corresponding Symantec Data Loss Prevention deployment using the information
in this section.
The key considerations in determining the deployment size are as follows:
■
Number of employees to be monitored
■
Amount of network traffic to monitor
■
Size of Exact Data Match profile (EDM) or Indexed Data Match profile (IDM)
The following table outlines three sample deployments based on enterprise size.
Review these sample deployments to understand which best matches your
organization’s environment.
Table 2-1
Types of enterprise deployments
Variable
Small Organization
Small/Medium
Enterprise
Large/Very Large
Enterprise
Number of employees
< 1000
< 10,000
> 10,000
Volume of network traffic to monitor
30-40 Mbps
30-40 Mbps
> 40 Mbps
12
Table 2-1
Types of enterprise deployments (continued)
Variable
Small Organization
Small/Medium
Enterprise
Large/Very Large
Enterprise
EDM/IDM size
EDM 4 million cells or
IDM 250 MB (1400
files). See the Symantec
Data Loss Prevention
Administration Guide for
information about EDM
and IDM sizing for
enterprise deployments.
See the Symantec Data
Loss Prevention
and IDM sizing for
See the Symantec Data
Loss Prevention
and IDM sizing for
Hardware requirements
See “Small organization
minimum hardware
requirements”
on page 14.
See “Small/medium
enterprise minimum
hardware requirements”
on page 14.
See “Large/very large
enterprise minimum
hardware requirements”
on page 15.
For additional related information see also Symantec Data Loss Prevention Network
Monitor and Prevent Performance Sizing Guidelines, available at the Symantec
Data Loss Prevention knowledgebase at
http://www.symantec.com/docs/TECH221999.
Minimum system requirements for Symantec Data
Loss Prevention servers
All Symantec Data Loss Prevention servers must meet or exceed the minimum
hardware specifications and run on one of the supported operating systems.
■
See “Small organization minimum hardware requirements” on page 14.
■
See “Small/medium enterprise minimum hardware requirements” on page 14.
■
See “Large/very large enterprise minimum hardware requirements” on page 15.
■
See “Operating system requirements for servers” on page 17.
New installations of Symantec Data Loss Prevention version 12.5 require Oracle
11.2.0.3 or 11.2.0.4 to store the Enforce Server database, depending on your
operating system.
If the Oracle database is installed on a dedicated computer (a three-tier deployment),
that system must meet its own set of system requirements.
See “Oracle database requirements” on page 25.
13
Small organization minimum hardware requirements
The following table provides the system requirements for branch office or small
organization single-tier systems.
Table 2-2
Required for
Single Server Installation
Processor
2 x 2.2 GHz 8-core CPU
Memory
64 GB RAM
Disk
3 TB, RAID 5 configuration (with a minimum of five
spindles)
NICs
1 copper or fiber 1 Gb Ethernet NIC (if you are using
Network Monitor you will need a minimum of two NICs)
Small/medium enterprise minimum hardware requirements
The following table provides the system requirements for small and medium-size
enterprise systems.
Table 2-3
Small/medium enterprise minimum system requirements
Required for
Enforce Server
Network Monitor
Network Discover,
Network Prevent, Mobile
Email Monitor, Mobile
Prevent, Endpoint
Prevent, or Classification
server
Processor
2 x 3.0 GHz CPU
2 x 3.0 GHz CPU
2 x 3.0 GHz CPU
Memory
6–8 GB RAM (EDM/IDM size 6–8 GB RAM (EDM/IDM size
can increase memory
can increase memory
requirements)
requirements. See the
Symantec Data Loss
Two-tier deployments may
Prevention Administration
require additional memory for
Guide for information about
running Oracle.
EDM and IDM sizing.)
6–8 GB RAM (EDM/IDM size
can increase memory
requirements. See the
Symantec Data Loss
Prevention Administration
Guide for information about
EDM and IDM sizing.)
14
Table 2-3
Small/medium enterprise minimum system requirements (continued)
Required for
Enforce Server
Network Monitor
Disk
500 GB, RAID 1+0 or RAID 140 GB
5 configuration is
recommended. RAID 5 is not
recommended for computers
that host the Oracle
database.
For Network Discover
deployments, approximately
150 MB of disk space is
required to maintain
incremental scan indexes.
This is based on an overhead
of 5 MB per incremental scan
target and 50 bytes per item
in the target.
NICs
1 copper or fiber 1 Gb/100
Mb Ethernet NIC to
communicate with detection
servers.
Mb Ethernet NIC to
communicate with the
Enforce Server.
Network Discover,
Prevent, Endpoint
server
140 GB
150 MB of disk space is
This is based on an overhead
of 5 MB per incremental scan
target and 50 bytes per item
in the target.
Mb Ethernet NIC to
communicate with the
Enforce Server.
Large/very large enterprise minimum hardware requirements
The following table provides the system requirements for large and very large
enterprise systems.
15
Table 2-4
Large/Very Large enterprise minimum system requirements
Required For
Enforce Server
Network Monitor
Network Discover,
Prevent, Endpoint
Server
Processor
2 x 3.0 GHz Dual Core CPU 2 x 3.0 GHz Dual Core CPU 2 x 3.0 GHz Dual Core CPU
Memory
8–16 GB RAM (EDM/IDM
size can increase memory
requirements)
requirements)
requirements)
140 GB
140 GB
Two-tier deployments
require additional memory
for running Oracle.
Disk Requirements
1 TB, RAID 1+0 or RAID 5
configuration is
recommended. RAID 5 is
not recommended for
computers that host the
Oracle database.
1 GB of disk space is
This is based on an
overhead of 5 MB per
incremental scan target and
50 bytes per item in the
target.
1 GB of disk space is
This is based on an
overhead of 5 MB per
incremental scan target and
50 bytes per item in the
target.
NICs
To communicate with
detection servers:
To communicate with the
Enforce Server:
To communicate with the
Enforce Server:
Mb Ethernet NIC
Mb Ethernet
Mb Ethernet NIC
For network traffic
monitoring (pick one):
Mb Ethernet NIC.
High-speed packet capture
cards
n/a
See “High-speed packet
n/a
capture cards” on page 41.
16
Operating system requirements for servers
Symantec Data Loss Prevention servers can be installed on a supported Linux or
Windows operating system. Different operating systems can be used for different
servers in a heterogeneous environment. (The Classification detection server, used
with the Enterprise Vault Data Classification Services, is not supported on Linux
operating systems.)
Symantec Data Loss Prevention supports the following operating systems for
Enforce Server and detection server computers:
■
Microsoft Windows Server 2008 R2, Enterprise Edition (64-bit)
■
Microsoft Windows Server 2008 R2, Standard Edition (64-bit)
■
Microsoft Windows Server 2008 R2 SP1, Enterprise Edition (64-bit)
■
Microsoft Windows Server 2008 R2 SP1, Standard Edition (64-bit)
■
Microsoft Windows Server 2012, Datacenter Edition (64-bit)
■
Microsoft Windows Server 2012, Standard Edition (64-bit)
■
Microsoft Windows Server 2012 R2, Datacenter Edition (64-bit)
■
■
Red Hat Enterprise Linux 5.7 through 5.11 (64-bit)
■
Red Hat Enterprise Linux 6.4 through 6.6 (64-bit)
Operating system requirements for Single Server installations
Symantec Data Loss Prevention supports the following operating systems for Single
Server installations:
■
Microsoft Windows Server 2008 R2, Enterprise Edition (64-bit)
■
■
Microsoft Windows Server 2008 R2 SP1, Enterprise Edition (64-bit)
■
Microsoft Windows Server 2008 R2 SP1, Standard Edition (64-bit)
■
Microsoft Windows Server 2012, Datacenter Edition (64-bit)
■
Microsoft Windows Server 2012, Standard Edition (64-bit)
■
Microsoft Windows Server 2012 R2, Datacenter Edition (64-bit)
■
17
■
Red Hat Enterprise Linux 6.5 and 6.6 (64-bit)
English language as well as localized versions of both Linux and Windows operating
systems are supported.
See “Supported languages for detection” on page 22.
See also the Symantec Data Loss Prevention Administration Guide for detailed
information about supported languages and character sets.
Linux partition guidelines
Minimum free space requirements for Linux partitions vary according to the specific
details of your Symantec Data Loss Prevention installation. The table below provides
general guidelines that should be adapted to your installation as circumstances
warrant. Symantec recommends using separate partitions for the different file
systems, as indicated in the table. If you combine multiple file systems onto fewer
partitions, or onto a single root partition, make sure the partition has enough free
space to hold the combined sizes of the file systems listed in the table.
Note: Partition size guidelines for detection servers are similar to those for Enforce
Server without an Oracle database.
See Table 2-6 on page 19.
Table 2-5
Linux partition minimum size guidelines—Enforce Server with Oracle
database
Partition
Minimum free space
Description and comments
/home
6 GB
Store the Oracle installation tools, Oracle
installation ZIP files, and Oracle critical patch
update (CPU) files in /home.
/tmp
1.2 GB
The Oracle installer and installation tools require
space in this directory.
/opt
500 GB for Small/Medium installations
Contains installed programs such as Symantec
Data Loss Prevention, the Oracle server, and
the Oracle database. The Oracle database
requires significant space in this directory. For
improved performance, you may want to mount
this partition on different disks/SAN/RAID from
where the root partition is mounted.
1 TB for Large/Very Large installations
18
Table 2-5
Linux partition minimum size guidelines—Enforce Server with Oracle
database (continued)
Partition
Minimum free space
/var
Contains logs, EDM/IDM indexes, incremental
scan indexes, and network packet capture
directories.
46 GB for Large/Very Large installations
Note: The /var/spool/pcap and
/var/SymantecDLP/drop_pcap directories
must reside on the same partition or mount
point.
/boot
100 MB
This must be in its own ext2 or ext3 partition,
not part of soft RAID (hardware RAID is
supported).
swap
Equal to RAM
If you need to have the memory dump in case
of system crash (for debugging), you may want
to increase these amounts.
Table 2-6
Linux partition minimum size guidelines—Enforce Server without
a database, or detection server
Partition
Minimum size guidelines
/opt
10 GB
Contains installed programs such as Symantec
Data Loss Prevention and the Oracle client.
/var
Contains logs, EDM/IDM indexes, incremental
scan indexes, and network packet capture
directories.
46 GB for Large/Very Large installations
Note: The /var/spool/pcap and
/var/SymantecDLP/drop_pcap directories
must reside on the same partition or mount
point.
/boot
100 MB
This must be in its own ext2 or ext3 partition,
not part of soft RAID (hardware RAID is
supported).
swap
Equal to RAM
If you need to have the memory dump in case
of system crash (for debugging), you may want
to increase these amounts.
19
Endpoint computer requirements for the Symantec DLP Agent
Endpoint computer requirements for the Symantec
DLP Agent
If you install Endpoint Prevent, the endpoint computers on which you install the
Symantec DLP Agent must meet the requirements that are described in the following
sections.
■
See “Operating system requirements for endpoint systems” on page 20.
■
See “Memory and disk space requirements for the Symantec DLP Agent”
on page 21.
Operating system requirements for endpoint systems
Symantec DLP Agents can be installed on computers running any of the following
Windows operating systems:
■
Microsoft Windows Server 2003 SP2 (32-bit), or Windows Server 2003 R2
(32-bit)
■
Microsoft Windows Server 2008 Enterprise or Standard Editions R2 (64-bit)
■
Microsoft Windows Server 2012 R2 Datacenter, Standard, Essential, or
Foundation Editions (64-bit, Desktop mode only)
■
Microsoft Windows 7 Enterprise, Professional, or Ultimate, including Service
Pack 1 (32-bit or 64-bit)
■
Microsoft Windows 8 Enterprise 64-bit PC operating system
Note: Windows Store (Metro UI) apps are not supported.
■
Microsoft Windows 8.1 Enterprise 64-bit PC operating system
■
Microsoft Windows 8.1 Update 1 Enterprise 64-bit PC operating system
■
Microsoft Windows 8.1 Update 2 Enterprise 64-bit PC operating system
Note: Windows Store (Metro UI) apps are not supported.
■
Apple Mac OS X 10.8 (64-bit)
■
■
20
Symantec Data Loss Prevention for Mobile requirements
Symantec DLP Agents can also be installed on supported localized versions of
these Windows operating systems.
See “Supported languages for detection” on page 22.
See also the Symantec Data Loss Prevention Administration Guide for detailed
information about supported languages and character sets.
See “About Endpoint Data Loss Prevention compatibility” on page 49.
Memory and disk space requirements for the Symantec DLP Agent
The Symantec DLP Agent software reserves a minimum of 25 MB to 30 MB of
memory on the Endpoint computer, depending on the actual version of the software.
The DLP Agent software temporarily consumes additional memory while it detects
content or communicates with the Endpoint Prevent server. After these tasks are
complete, the memory usage returns to the previous minimum.
The initial Symantec DLP Agent installation consumes approximately 70 MB to 80
MB of hard disk space. The actual minimum amount depends on the size and
number of policies that you deploy to the endpoint computer. Additional disk space
is then required to temporarily store incident data on the endpoint computer until
the Symantec DLP Agent sends that data to the Endpoint Prevent server. If the
endpoint computer cannot connect to the Endpoint Prevent server for an extended
period of time, the Symantec DLP Agent will continue to consume additional disk
space as new incidents are created. The disk space is freed only after the agent
software reconnects to the Endpoint Prevent server and transfers the stored
incidents.
Symantec Data Loss Prevention for Mobile
requirements
The following table contains requirements you need to set up Symantec Data Loss
Prevention for Mobile (Mobile Prevent). If there are multiple options available for a
requirement, each option is listed.
Note: The Symantec Data Loss Prevention Mobile Prevent for Web detection server
is not supported in a virtual or hosted environment, or on Single Server installations.
For system requirements for Mobile Prevent detection servers:
■
■
21
Table 2-7
Mobile Prevent requirements
Requirement
Description
Supported
devices
iPad 2, iPad 3, iPad Mini
Operating
systems
iOS for iPad: 6.0, 6.0.1, 6.1, 6.1.2, 6.1.3, 7
ActiveSync
(Required only for detection of corporate email) Microsoft Exchange 2003,
2007, and 2010 with ActiveSync
Web proxy
Blue Coat Proxy SG version 5.5.3.1, 6.2.12.1, and 6.5.x for Mobile Prevent,
or for Mobile Prevent deployed with Network Prevent for Web
iPhone 4, iPhone 4S, iPhone 5, iPhone 5S, iPhone 5C (all carriers)
iOS for iPhone: 6.0, 6.0.1, 6.1, 6.1.2, 6.1.3, 7
Note: Your proxy server must not use network address translation (NAT)
where it is located in your infrastructure.
VPN server
Cisco ASA series
Cisco AnyConnect
Juniper SA series
Symantec Data Loss Prevention supports a large number of languages for detection.
Policies can be defined that accurately detect and report on the violations found in
content in these languages.
Table 2-8
Languages supported by Symantec Data Loss Prevention
Language
Version 10.x
Versions 11.0,
Version 12.x
11.1.x, 11.5, 11.6
Arabic
Yes
Yes
Yes
Brazilian Portuguese
Yes
Yes
Yes
Chinese (traditional)
Yes
Yes
Yes
Chinese (simplified)
Yes
Yes
Yes
Czech
Yes
Yes
Yes
Danish
Yes
Yes
Yes
Dutch
Yes
Yes
Yes
22
Table 2-8
Languages supported by Symantec Data Loss Prevention
(continued)
Language
Version 10.x
Versions 11.0,
Version 12.x
11.1.x, 11.5, 11.6
English
Yes
Yes
Yes
Finnish
Yes
Yes
Yes
French
Yes
Yes
Yes
German
Yes
Yes
Yes
Greek
Yes
Yes
Yes
Hebrew
Yes
Yes
Yes
Hungarian
Yes
Yes
Yes
Italian
Yes
Yes
Yes
Japanese
Yes
Yes
Yes
Korean
Yes
Yes
Yes
Norwegian
Yes
Yes
Yes
Polish
Yes
Yes
Yes
Portuguese
Yes
Yes
Yes
Romanian
Yes
Yes
Yes
Russian
Yes
Yes
Yes
Spanish
Yes
Yes
Yes
Swedish
Yes
Yes
Yes
Turkish
Yes*
Yes*
Yes*
*Symantec Data Loss Prevention cannot be installed on a Windows operating
system that is localized for the Turkish language, and you cannot choose Turkish
as an alternate locale.
For additional information about specific languages, see the Symantec Data Loss
Prevention Release Notes.
A number of capabilities are not implied by this support:
23
■
Technical support provided in a non-English language. Because Symantec Data
Loss Prevention supports a particular language does not imply that technical
support is delivered in that language.
■
Localized administrative user interface (UI) and documentation. Support for a
language does not imply that the UI or product documentation has been localized
into that language. However, even without a localized UI, user-defined portions
of the UI such as pop-up notification messages on the endpoint can still be
localized into any language by entering the appropriate text in the UI.
■
Localized content. Keywords are used in a number of areas of the product,
including policy templates and data identifiers. Support for a language does not
imply that these keywords have been translated into that language. Users may,
however, add keywords in the new language through the Enforce Server
administration console.
■
New file types, protocols, applications, or encodings. Support for a language
does not imply support for any new file types, protocols, applications, or
encodings that may be prevalent in that language or region other than what is
already supported in the product.
■
Language-specific normalization. An example of normalization is to treat accented
and unaccented versions of a character as the same. The product already
performs a number of normalizations, including standard Unicode normalization
that should cover the vast majority of cases. However, it does not mean that all
potential normalizations are included.
■
Region-specific normalization and validation. An example of this is the awareness
the product has of the format of North American phone numbers, which allows
it to treat different versions of a number as the same, and to identify invalid
numbers in EDM source files. Support for a language does not imply this kind
of functionality for that language or region.
Items in these excluded categories are tracked as individual product enhancements
on a language- or region-specific basis. Please contact Symantec Support for
additional information on language-related enhancements or plans for the languages
not listed.
You can install any of the available language packs for your Symantec Data Loss
Prevention deployment. Language packs provide a limited set of non-English
languages for the Enforce Server administration console user interface and online
Help. Note that these language packs are only needed to provide a translated user
interface and online Help; they are not needed for data detection. Language packs
24
also contain translated versions of selected Symantec Data Loss Prevention
documentation.
As they become available, language packs for Symantec Data Loss Prevention are
distributed along with the software products they support. You can also download
and add a language pack to an installation. Language packs do not require any
additional purchase or license. Consult the Symantec Data Loss Prevention
Administration Guide for details on how to add and enable a language pack.
Language packs are distributed in the Symantec_DLP_12.5_Lang_Pack-ML.zip file
on the Symantec FileConnect website. When you extract the contents of the ZIP
file, the individual language pack files have names in the form:
Symantec_DLP_12.5_Lang_Pack_<language>.zip
Language packs are available for the following languages:
Language
Locale code
Brazilian Portuguese
PT_BR
Chinese (Simplified)
ZH_CN
Chinese (Traditional)
ZH_TW
French
FR_FR
Japanese
JA_JP
Korean
KO_KR
Mexican Spanish
ES_MX
Russian
RU_RU
Note: Not all language packs are available when a product is first released.
All new Symantec Data Loss Prevention installations must install and use Oracle
11g Standard Edition version 11.2.0.3 or 11.2.0.4 (64-bit) with the most recent
Critical Patch Update. Symantec Data Loss Prevention includes Oracle 11g and
the necessary patches.
25
Note: Symantec only supports the Standard Edition of the Oracle database, but the
Symantec Data Loss Prevention database schema is supported on all editions of
Oracle.
Symantec Data Loss Prevention requires the Oracle database to use the AL32UTF8
character set. If your database is configured for a different character set, the installer
notifies you and cancels the installation.
You can install Oracle on a dedicated server (a three-tier deployment) or on the
same computer as the Enforce Server (a two-tier or one-tier deployment):
■
Three-tier deployment.
System requirements for a dedicated Oracle server are listed below. Note that
dedicated Oracle server deployments also require that you install the Oracle
11g Client on the Enforce Server computer to communicate with the remote
Oracle 11g instance.
■
Single- and two-tier deployments.
When installed on the Enforce Server computer, the Oracle system requirements
are the same as those of the Enforce Server.
See “Small organization minimum hardware requirements” on page 14.
If you install Oracle 11g on a dedicated server, that computer must meet the following
minimum system requirements for Symantec Data Loss Prevention:
■
One of the following operating systems:
■
Microsoft Windows Server 2008 R2 Standard or Enterprise (64-bit) (Oracle
11.2.0.3)
■
Microsoft Windows Server 2008 R2 SP1 Standard or Enterprise (64-bit)
(Oracle 11.2.0.3)
■
Microsoft Windows Server 2012 Standard or Datacenter (64-bit) (Oracle
11.2.0.4)
■
Red Hat Enterprise Linux 5.7 through 5.10 (64-bit) (Oracle 11.2.0.3)
■
Red Hat Enterprise Linux 6.4 or 6.5 (64-bit) (Oracle 11.2.0.4)
■
6 GB of RAM
■
6 GB of swap space (equal to RAM up to 16 GB)
■
500 GB – 1 TB of disk space for the Enforce database
26
Browser requirements for accessing the Enforce Server administration console
Note: Support for 32-bit platforms for Oracle is discontinued as of version 12.0 of
Symantec Data Loss Prevention.
See the Symantec Data Loss Prevention 64-bit Server Migration and Tuning Guide
for more information.
On a Linux system, if the Oracle database is on the same computer as the Enforce
Server, then the /opt file system must have at least 500 GB of free space for small
or medium installations. 1 TB of free space is required for large or very large
installations. If Oracle is installed on a different computer from the Enforce Server,
then the /opt file system must have at least 10 GB of free space, and the /boot
file system must have at least 100 MB of free space.
The exact amount of disk space that is required for the Enforce database depends
on variables such as:
■
The number of policies you plan to initially deploy
■
The number of policies you plan to add over time
■
The number and size of attachments you want to store (if you decide to store
attachments with related incidents)
■
The length of time you intend to store incidents
See the Symantec Data Loss Prevention Administration Guide for more information
about developing policies.
See the Symantec Data Loss Prevention Oracle Installation and Upgrade Guide
for more Oracle installation information.
Browser requirements for accessing the Enforce
Server administration console
You can access the Enforce Server administration console using any of the following
browsers:
■
Microsoft Internet Explorer 9.x or 10
■
Mozilla Firefox 24 or 27
Adobe Flash Player 11.1 is required to view the folder risk report for Network
Discover (Incidents > Discover > Folder Risk Report).
27
Requirements for using certificate authentication for single sign-on
Requirements for using certificate authentication for
single sign-on
Certificate authentication enables a user to automatically log on to the Enforce
Server administration console using a client certificate that is generated by your
public key infrastructure (PKI). To use certificate authentication, your PKI must
deliver an X.509-compliant client certificate to the Tomcat container when a user
accesses the Enforce Server administration console URL. The client certificate
must contain a unique CN value that maps to an active user account in the Enforce
Server configuration.
The client certificate must be delivered to the Enforce Server when a client's browser
performs the SSL handshake with the Enforce Server administration console. For
example, you might use a smart card reader and middleware with your browser to
automatically present a certificate to the Enforce Server. Or, you might obtain an
X.509 certificate from a certificate authority and upload the certificate to a browser
that is configured to send the certificate to the Enforce Server.
Symantec Data Loss Prevention supports two mechanisms for checking whether
a client certificate has been revoked: Online Certificate Status Protocol (OCSP)
and Certificate Revocation Lists (CRLs). Symantec Data Loss Prevention can
operate with an RFC 2560-compliant OCSP responder. If the OCSP responder
cannot be reached, Symantec Data Loss Prevention will perform CRL validation
using the method described in section 6.3 of RFC 3280. To use CRL validation,
each client certificate must include the HTTP URL of a CRL distribution point
(CRLDP). Symantec Data Loss Prevention extracts the HTTP URL from the CRL
distribution point extension to the X.509 certificate. Note, however, that Symantec
Data Loss Prevention cannot use LDAP URLs that are embedded in the CRL
distribution point extension.
For more information about configuring certificate authentication and certificate
revocation checks, see the Symantec Data Loss Prevention System Administration
Guide.
Virtual server and virtual workstation support
Symantec supports running Symantec Data Loss Prevention on VMware ESX 4.x
and later virtualization products, provided that the virtualization environment is
running a supported operating system.
See “Operating system requirements for servers” on page 17.
At a minimum, ensure that each virtual server environment matches the system
requirements for servers described in this document.
28
See “Minimum system requirements for Symantec Data Loss Prevention servers”
on page 13.
Be aware of the following limitations for virtualization:
■
Endpoint Prevent servers are supported only for configurations that do not
exceed the recommended number of connected agents.
■
Symantec does not support running the Oracle database server on virtual
hardware. If you deploy the Enforce Server to a virtual machine, you must install
the Oracle database using physical server hardware.
■
Symantec does not support running the Network Monitor or Mobile Prevent for
Web detection servers on virtual machines.
■
Symantec Data Loss Prevention does not support Single Server installations
on virtual machines.
Note that a variety of factors influence performance of virtual machine configurations,
including the number of CPUs, the amount of dedicated RAM, and the resource
reservations for CPU cycles and RAM. The virtualization overhead and guest
operating system overhead can lead to a performance degradation in throughput
for large datasets compared to a system running on physical hardware. Use your
own test results as a basis for sizing deployments to virtual machines.
See the Symantec Data Loss Prevention Network Monitor and Prevent Performance
Sizing Guidelines, available at the Symantec Data Loss Prevention knowledgebase
at http://www.symantec.com/docs/TECH221999, for additional information about
running Network Prevent servers on virtual machines.
Virtual desktop and virtual application support with
Endpoint Prevent
You can deploy the DLP Agent on Citrix and VMware virtual machines.
Citrix virtualization support
Citrix XenDesktop and Citrix XenApp provide virtual Windows desktops and Windows
applications to clients of the Citrix servers. Symantec supports deploying the
Symantec DLP Agent software directly on Citrix XenApp application servers or
Citrix XenDesktop virtual machines to prevent clients from extracting confidential
data from Citrix published applications or desktops to the client computer. Symantec
Data Loss Prevention provides this functionality by monitoring volumes, print/fax
requests, clipboards, and network activity on the Citrix server to detect when
confidential data would be sent to a client computer. A Symantec DLP Agent does
not need to be installed on each individual Citrix client to support this functionality.
A single Symantec DLP Agent monitors all of the Citrix clients. All Citrix clients that
29
are protected by the agent monitor need to have a valid Endpoint Prevent license.
The license is required whether a Symantec DLP Agent is installed on the client or
not.
Note: All incidents that are generated on Citrix drives by the Symantec DLP Agent
software appear as Removable Storage Device incidents. In the Enforce Server
administration console, you cannot deselect the Removable Storage event for
Citrix drives because this event is always monitored by agents that are deployed
to Citrix servers.
The following Citrix products are supported, with the indicated limitations:
30
Table 2-9
Citrix virtualization support and limitations
Supported Citrix products
■
■
■
Citrix XenApp 4.5 on Windows Server 2003
(32-bit) Enterprise Edition SP2
Citrix XenApp 6 on Windows Server 2008
Enterprise Edition R2 (64-bit)
Citrix XenApp 6.5 on Windows Server 2008
Enterprise Edition R2 (64-bit)
Limitations
31
Table 2-9
Citrix virtualization support and limitations (continued)
Limitations
Performance and deployment:
■
■
■
■
■
You must install the Symantec DLP Agent software on each
XenApp server host, and on any individual application servers that
publish applications through XenApp.
All detection on Citrix XenApp is performed in a single thread (all
user activities are analyzed sequentially).
Symantec tests indicate that the Symantec DLP Agent software
can support a maximum of 40 simultaneous clients per Citrix server.
However, detection performance varies depending on the server
hardware, the type of applications that are used, and the activities
that Citrix clients perform. You must verify the Symantec DLP Agent
performance characteristics for your environment.
The Symantec DLP Agent software should connect to an Endpoint
Prevent server that is reserved for Citrix agents. Using the same
Endpoint Prevent server for non-Citrix agents limits the functionality
of those agents, because you must disable Local Drive and
CD/DVD monitoring for the server as a whole.
See “” on page 34.
When you use the Enforce Server administration console to
configure endpoint events to monitor, you must deselect CD/DVD
and Local Drive events for XenApp agents. These items are present
on the server configuration page, but they are not supported for
Citrix XenApp.
Endpoint Prevent features:
■
■
■
■
■
■
■
Symantec DLP Agents that are deployed to Citrix XenApp servers
cannot detect confidential data in an HTTP/S attachment if the
attachment is from an Endpoint-published drive. Detection is
performed if the attachment is from a server local drive or from a
file server that is accessible to the Citrix Published App.
If XenApp streams an application directly to an endpoint computer,
the Symantec DLP Agent that is deployed to XenApp server cannot
monitor the streamed application.
FTP events are not supported.
Printer/Fax events for files on endpoint-published drives are not
monitored for Adobe Acrobat Reader.
Instant messenger events (MSN IM, Yahoo IM, and AIM) have not
been tested and are not supported.
IP addresses in Data Loss Prevention incident snapshots contain
the IP address of the XenApp server, and not a Citrix client.
If the Symantec DLP Agent software blocks an attempted copy to
a client drive, it does not provide an option to restore or recover
32
Table 2-9
Citrix virtualization support and limitations (continued)
Limitations
the file at a later time.
■
■
■
Citrix XenDesktop 4 on Windows 7 (32-bit Performance and deployment:
or 64-bit)
■ You must install the Symantec DLP Agent software on each virtual
Citrix XenDesktop 5.0 on Windows 7 SP1
machine on the XenDesktop server.
(32-bit or 64-bit)
■ The Symantec DLP Agent software can connect either to a
Citrix XenDesktop 5.6 on Windows 7 SP1
dedicated Endpoint Prevent server or to an Endpoint Prevent server
(32-bit or 64-bit)
that is shared with non-Citrix agents. You cannot connect to an
Endpoint Prevent server that is reserved for Citrix XenApp. Note
that if you use the same server for both Citrix and non-Citrix agents,
you cannot configure events independently for each environment.
Endpoint Prevent features:
■
■
■
■
■
■
Symantec DLP Agents that are deployed to Citrix XenDesktop VMs
cannot detect confidential data in an HTTP/S attachment if the
attachment is from an Endpoint-published drive. Detection is
performed if the attachment is from a server local drive or from a
file server that is accessible to the Citrix Published Desktop.
FTP events are not supported.
Printer/Fax events for files on endpoint-published drives are not
monitored for Adobe Acrobat Reader.
Instant messenger events (MSN IM, Yahoo IM, and AIM) have not
been tested and are not supported.
IP addresses in Data Loss Prevention incident snapshots contain
the IP address of the XenDesktop virtual machine, and not a Citrix
client.
If the Symantec DLP Agent software blocks an attempted copy to
a client drive, it does not provide an option to restore or recover
the file at a later time.
Detection server restriction for Symantec DLP Agents on Citrix
XenApp
Symantec does not recommend using a single Endpoint Prevent detection server
with both physical endpoint computers and Citrix XenApp servers. When you use
the Enforce Server administration console to configure endpoint events to monitor,
you must deselect CD/DVD and Local Drive events for Citrix XenApp agents. (These
items are present on the server configuration page, but they are not supported for
Citrix XenApp.) Using the same Endpoint Prevent Server for non-Citrix agents limits
the functionality of those agents, because you must disable Local Drive and CD/DVD
events for the server as a whole.
33
To support Symantec DLP Agent software on both Citrix XenApp servers and
physical endpoint computers, Symantec recommends that you deploy two Endpoint
Prevent detection servers and ensure that each server is reserved for either Citrix
XenApp agents or physical endpoint agent installations.
VMware virtualization support
Symantec supports running the Symantec DLP Agent software on virtual
workstations using VMware Workstation 6.5.x, VMware View 4.6, VMware Fusion
(Mac OS), and Hyper-V.
Third-party software requirements and
recommendations
Symantec Data Loss Prevention requires certain third-party software. Other
third-party software is recommended. See:
■
Table 2-10 for required software
■
Table 2-11 for required Linux RPMs
■
Table 2-12 for recommended software
Table 2-10
Required third-party software
Software
Required for
Description
Adobe Reader
All systems
Adobe Reader is required for reading
the Symantec Data Loss Prevention
documentation.
Download from Adobe.
Apache Tomcat version 7.0.52
Enforce Server
Required to support the reporting
system.
The correct version of Tomcat is
automatically installed on the Enforce
Server by the Symantec DLP Installation
Wizard and does not need to be
obtained or installed separately.
Java Runtime Environment (JRE) All servers
1.7.0_51
The Symantec DLP Installation Wizard
automatically installs the correct JRE
version.
Flex SDK 4.6
Required SDK for Folder Risk Reporting.
Network Discover Server
34
Table 2-10
Software
Required third-party software (continued)
Required for
Description
Napatech driver version 4.22a
Napatech NT4E high-speed packet
(RHEL 5.10 only), 4.22c (Windows capture card
Server 2008 R2 only), 4.26a and
4.26c (Linux and Windows)
Provides high-speed montitoring.
WinPcap 4.1.1, 4.1.2, 4.1.3
Windows packet capture library.
Required for Windows-based Network
Monitor Server. WinPcap 4.1.3 is
required for Microsoft Windows Server
2012.
Napatech cards are not supported on
Single Server installations.
Download from winpcap.org.
Recommended for all Windows-based
detection servers.
Endace card driver 4.2.4
Detection servers equipped with an
Endace network measurement card.
Endace cards are not supported on
Download from Endace.
See “Small/medium enterprise minimum
hardware requirements” on page 14.
VMware
Required to run supported components Virtualization software.
in a virtualized environment.
Download from VMware.
See “Virtual server and virtual
workstation support” on page 28.
Microsoft Active Directory 2003,
2008 R2, or 2012
Required versions for connecting to
Active Directory.
Provides directory services for Windows
domain networks.
In addition to the Linux Minimal Installation, Linux-based Symantec Data Loss
Prevention servers require the Red Hat Package Managers (RPM) listed in
Table 2-11.
35
Required Linux RPMs
Table 2-11
Linux-based servers
Required RPMs
Enforce Server
apr
apr-util
binutils
compat-libstdc++-296
compat-libstdc++-33
expat
libicu
Xorg-x11*
Oracle server
*Required only for graphical installation.
Console-mode installation does not require an X
server.
Network Monitor Server
apr
apr-util
compat-libstdc++-296
compat-libstdc++-33
expat
libicu
Xorg-X11*
*Required only for graphical installation.
Console-mode installation does not require an X
server.
Red Hat Enterprise Linux versions 6.4 and 6.5 have these additional dependencies:
■
compat-openldap
■
compat-expat1
■
compat-db43
■
openssl098e
Note: SeLinux must be disabled on all Linux-based servers.
Symantec recommends the third-party software listed in Table 2-12 for help with
configuring and troubleshooting your Symantec Data Loss Prevention deployment.
36
Table 2-12
Recommended third-party software
Software
Location
Description
Wireshark
Any server computer
Use Wireshark (formerly Ethereal) to verify that
the detection server NIC receives the correct traffic
from the SPAN port or tap. You can also use
Wireshark to diagnose network problems between
other servers.
Download the latest version from Wireshark.
dagsnap
Network Monitor Server computers that Use in combination with Wireshark to verify that
use Endace cards
the detection server Endace NIC receives the
correct traffic from the SPAN port or tap. Dagsnap
is included with Endace cards, and is not required
with non-Endace cards.
Sysinternals Suite
Any Windows server computer
Troubleshooting utilities. Recommended for
diagnosing problems on Windows server
computers.
Download the latest version from Microsoft.
LDAP browser
Enforce Server
An LDAP browser is recommended for configuring
or troubleshooting Active Directory or LDAP.
37
Chapter
3
Product compatibility
■
Environment compatibility and requirements for Network Prevent for Email
■
Proxy server compatibility with Network Prevent for Web
■
Secure ICAP support for Network Prevent for Web using the stunnel service
■
High-speed packet capture cards
■
Data Insight compatibility with Symantec Data Loss Prevention version 12.5
■
Symantec Veritas Cluster Server compatibility
■
Symantec / Symantec Data Loss Prevention integrations
■
Network Discover compatibility
■
About Endpoint Data Loss Prevention compatibility
■
Mobile Prevent compatibility
■
Mobile Email Monitor compatibility
Environment compatibility and requirements for
Network Prevent for Email
The Network Prevent for Email Server is compatible with a wide range of
enterprise-grade third-party SMTP-compliant MTAs and hosted email services.
Consult your MTA vendor or hosted email service for specific support questions.
Network Prevent for Email Server can integrate with an MTA or hosted email service
that meets the following requirements:
Proxy server compatibility with Network Prevent for Web
■
The MTA or hosted email service must be capable of strict SMTP compliance.
It must be able to send and receive mail using only the following command
verbs: HELO (or EHLO), RCPT TO, MAIL FROM, QUIT, NOOP, and DATA.
■
When running the Network Prevent for Email Server in reflecting mode, the
upstream MTA must be able to route messages to the Network Prevent for Email
Server once and only once for each message.
In practice, these requirements mean that you can use an SMTP-compliant MTA
that can route outbound messages from your internal mail infrastructure to the
Network Prevent for Email Server. For reflecting mode compatibility, the MTA must
also be able to route messages that are returned from the Network Prevent for
Email Server out to their intended recipients.
Network Prevent for Email Server attempts to initiate a TLS connection with a
downstream MTA only when the upstream MTA issues the STARTTLS command.
The TLS connection succeeds only if the downstream MTA or hosted email service
supports TLS and can authenticate itself to the Network Prevent for Email Server.
Successful authentication requires that the appropriate keys and X509 certificates
are available for each mail server in the proxied message chain.
See the Symantec Data Loss Prevention MTA Integration Guide for Network Prevent
for Email for information about configuring TLS support for Network Prevent for
Email servers operating in forwarding mode or reflecting mode.
Proxy server compatibility with Network Prevent for
Web
Network Prevent for Web Servers use a standard Internet Content Adaptation
Protocol (ICAP) interface and support many proxy servers. Table 3-1 indicates the
servers and the protocols.
Symantec Data Loss Prevention also supports secure ICAP (SICAP), using stunnel.
See “Secure ICAP support for Network Prevent for Web using the stunnel service”
on page 40.
Table 3-1
Proxy
Network Prevent for Web supported proxy servers
Supported protocols
Blue Coat ProxySG version 4.2.1,
HTTP, HTTPS, FTP over HTTP, or
5.2.4.8, 5.5.2.1, 5.5.3.1, 6.2.12.1, and FTP proxy
6.5.x for Network Prevent for Web
Blue Coat ProxySG version 5.5.3.1 for
Mobile Prevent
Configuration information
Blue Coat product documentation
39
Secure ICAP support for Network Prevent for Web using the stunnel service
Network Prevent for Web supported proxy servers (continued)
Table 3-1
Proxy
Supported protocols
Configuration information
Cisco IronPort S-Series version 6.0,
7.1.2
HTTP, HTTPS, FTP over HTTP
Cisco IronPort product documentation
Secure Computing Secure Web
HTTP, HTTPS, FTP over HTTP, or
(Webwasher) versions 6.9.x, 7.2, and FTP proxy
7.4
Secure Web documentation
(particularly the chapter that describes
setting up Secure Web with a DLP
Solution)
Squid Web Proxy version 3.3.x (Linux HTTP
only)
See the Symantec Data Loss
Prevention Integration Guide for Squid
Web Proxy
Symantec Web Gateway versions 5.0 HTTP, HTTPS
and 5.0.2.8
See the Symantec Web Gateway 5.0
Implementation Guide
Websense Appliance V5000 and
HTTP, HTTPS
V10000, with Websense Web Security
version 7.6.0
Does not support redaction.
Only supports "Block HTTP/HTTPS".
RESPMOD is not supported.
Websense blocks the traffic only when
the size of the Symantec Data Loss
Prevention rejection message (in the
response rule) is larger than 512
bytes. If the rejection message is less
than 512 bytes, an incident is
generated but the network traffic is not
blocked.
Secure ICAP support for Network Prevent for Web
using the stunnel service
Symantec has certified Network Prevent for Web to enable secure ICAP (SICAP)
communications with the Blue Coat ProxySG server, beginning with Blue Coat
ProxySG version 6.2.12.1. The open-source stunnel service acts as an external
SSL encryption wrapper to handle encrypted data sent by the Blue Coat ProxySG
server. This secure communications depends on the stunnel service and the
OpenSSL toolkit.
For instructions on how to configure secure ICAP functionality with Network Prevent
for Web on both Linux and Windows servers, see Symantec Data Loss Prevention
Knowledgebase article http://www.symantec.com/docs/TECH220170.
40
This topic describes the high-speed packed capture cards that are supported for
Network Prevent.
Supported high-speed packet capture cards
Table 3-2
Card
Version
Driver version
Endace
DAG_7.5 G2/G4 (PCI-E)
4.2.4
Note: Endace cards for use with Data
Loss Prevention are supported on
Linux 64-bit systems only. Endace
cards are not supported on Single
Server installations.
Napatech (64-bit hardware only)
NT4E
Note: Napatech cards are not
supported on Single Server
installations.
4.22a (RHEL 5.10 only), 4.22c
(Windows Server 2008 R2 only), 4.26a
and 4.26c (RHEL 5.x and 6.x,
Microsoft Windows Server 2008 R2
and 2012)
Data Insight compatibility with Symantec Data Loss
Prevention version 12.5
Symantec Data Insight is a separately licensed option to Symantec Data Loss
Prevention that helps organizations solve the problem of identifying data owners
and responsible parties for information due to incomplete or inaccurate metadata
or tracking information. Symantec Data Insight provides a connection from the
Enforce Server to a Symantec Data Insight Management Server.
Table 3-3
Supported versions of Symantec Data Insight for Symantec Data
Loss Prevention
Symantec
DLP version DLP version DLP version DLP version
Data Insight 11.0
11.1
11.5
11.6
Version
DLP version
12.0
DLP version
12.5
2.0
Yes
Yes
Yes
Yes
Yes
Yes
2.5
No
Yes
Yes
Yes. No
Yes
SharePoint
activities included
in incident data.
Yes
41
Table 3-3
Supported versions of Symantec Data Insight for Symantec Data
Loss Prevention (continued)
Symantec
DLP version DLP version DLP version DLP version
Data Insight 11.0
11.1
11.5
11.6
Version
DLP version
12.0
DLP version
12.5
3.0
No
Yes
Yes
Yes
Yes
Yes
3.0 RP1
No
Yes
Yes
Yes
Yes
Yes
3.0 RP2
No
Yes
Yes
Yes
Yes
Yes
3.0.1
No
Yes
Yes
Yes
Yes
Yes
3.0.1 RP1
No
No
No
Yes (11.6.1)
Yes
Yes
3.0.1 RU1
RP4
No
No
No
No
Yes
Yes
4.0
No
No
No
No
Yes
Yes
4.0 RP2
No
No
No
No
Yes
Yes
4.5
No
No
No
No
Yes
Yes
Symantec Veritas Cluster Server (VCS) is a high-availability solution that provides
failover capabilities for the Symantec Data Loss Prevention Enforce Server and
Oracle database hosts. Symantec Data Loss Prevention version 12.5 supports VCS
version 5.1 SP2 and 6.0 on Microsoft Windows operating systems, and VCS version
5.1 SP1 and 6.0 Linux 64-bit operating systems.
Symantec / Symantec Data Loss Prevention
integrations
This section describes compatibility of various integrations of Symantec Data Loss
Prevention with other Symantec products.
42
Symantec / Symantec Data Loss Prevention integrations
Table 3-4
Symantec
product
Version
Symantec product compatibility with Symantec Data Loss Prevention
Note
Symantec PGP
2.63
Universal Gateway
Email
Symantec
Messaging
Gateway (SMG)
Symantec Web
Gateway (SWG)
Symantec
Enterprise Vault
Yes
Yes
Yes
Yes
Yes
No
3.3.1
No
No
No
Yes
Yes
Yes
7.5
Yes
Yes
Yes
Yes
No
Yes
8.0
Yes
Yes
Yes
Yes
No
Yes
10.0.x
No
No
Yes
Yes
Yes
Yes
10.5.x
No
No
No
No
No
Yes
5.0
No
No
Yes
Yes
Yes
Yes
5.0,
5.0.2.8
No
No
Yes
Yes
Yes
Yes
10.0
Yes
Yes
Yes
No
No
No
10.0.1
No
No
Yes
Yes
No
No
10.0.2
No
No
No
No
Yes
No
10.0.3
No
No
No
No
Yes
No
10.0.4
No
No
No
No
No
Yes
11
No
No
No
No
No
Yes
No
No
Yes
Yes
Yes
Yes
Symantec Data
Insight
Symantec Mobile
Management
(SMM)
DLP
DLP
DLP
DLP
DLP
DLP
version version version version version version
11.0
11.1
11.5
11.6
12.0
12.5
See “Data Insight
compatibility with
Symantec Data
Loss Prevention
version 12.5”
on page 41.
7.1 SPI
43
Table 3-4
Symantec
product
Version
Symantec product compatibility with Symantec Data Loss Prevention
(continued)
Note
7.2
Symantec Veritas
Cluster Server
DLP
DLP
DLP
DLP
DLP
DLP
version version version version version version
11.0
11.1
11.5
11.6
12.0
12.5
No
For
Windows
64-bit: 5.1
SP2
High-availability
No
solution for the
Enforce Server and
Oracle database.
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
See “Symantec
Veritas Cluster
Server
compatibility”
on page 42.
For
Windows
64-bit: 6.0
No
No
Yes
Yes
Yes
Yes
For Linux
64-bit: 5.1
SP1
No
No
Yes
Yes
Yes
Yes
For Linux
64-bit: 6.0
No
No
Yes
Yes
Yes
Yes
For information
No
about configuring
Symantec Endpoint
Protection for use
with Network
Discover and
Network Monitor,
see the Symantec
Data Loss
Prevention 12.0
Release Notes.
No
No
No
Yes
Yes
Symantec Endpoint 12.1
Protection
Network Discover locates exposed confidential data by scanning a broad range of
enterprise data repositories such as: file servers, databases, Microsoft SharePoint,
Lotus Notes, Documentum, Livelink, Microsoft Exchange, and Web servers.
44
See “Supported file system targets” on page 45.
See “Supported IBM Notes targets” on page 46.
See “Supported SQL database targets” on page 46.
See “Supported SharePoint server targets” on page 46.
See “Supported Exchange Server Web Store connector targets” on page 47.
See “Supported Exchange Server Web Services connector targets” on page 47.
See “Supported file system scanner targets” on page 48.
See “Supported Documentum (scanner) targets” on page 48.
See “Supported Livelink scanner targets” on page 48.
See “Supported Web server (scanner) targets” on page 49.
Supported file system targets
The File System target supports scanning of the following network file systems.
Supported file servers:
■
CIFS Servers only
Supported file shares:
■
CIFS on Windows Server 2008 and 2012
■
NFS on Red Hat Enterprise Linux 5.x and 6.x
■
DFS scanning on Windows 2008 and 2012.
Note: DFS is not supported with Network Protect.
In addition, the File System target supports scanning of the following file types:
■
Microsoft Outlook Personal Folders (.pst files) created with Outlook 2007, 2010,
and 2013.
The Network Discover Server scanning this target must be running a Windows
operating system, and Outlook 2007 or later must be installed on that system.
■
File systems on UNIX systems, even if they are not exposed as CIFS or NFS
shares.
Use the SFTP protocol to provide a method similar to the scans of file shares.
You can also scan the local file system on a Linux Network Discover Server by
listing the path name in the content root. For example, you can enter
/home/myfiles.
45
Supported IBM Notes targets
The IBM Notes (formerly known as Lotus Notes) target supports scanning of the
following versions:
■
Lotus Notes 7.0
■
Lotus Notes 8.0
■
Lotus Notes 8.5.x
■
IBM Notes 9.0.x
The files Notes.jar and NCSO.jar are in the Lotus Notes client installation directory.
The manifest version number of these files depend on the Domino server version.
■
Version 7 has a manifest version in the JAR file of 1.4.2
■
■
Supported SQL database targets
The following SQL Databases were tested with Network Discover Target scans:
■
Oracle 10g, 11g (11.2.0.4), and 12c (12.1.0.2) (the vendor_name is oracle)
■
SQL Server 2005, 2008 R2, 2012, and 2014 (the vendor_name is sqlserver)
■
DB2 9 (the vendor_name is db2)
Contact Symantec Data Loss Prevention support for information about scanning
any other SQL databases.
Supported SharePoint server targets
The following SharePoint server targets are supported:
■
Microsoft Office SharePoint Server 2007, on Windows Server 2003, 32-bit or
64-bit, or Windows Server 2008 R1, 32-bit or 64-bit
■
Microsoft Office SharePoint Server 2010, on Windows Server 2008 R2, 64-bit
■
Microsoft Office SharePoint Server 2013, on Windows Server 2008 R2, 64-bit
■
Microsoft Office SharePoint Server 2013 SP1, on Windows Server 2012 R2,
64-bit
■
Microsoft Office SharePoint Online 2010
■
Microsoft Office SharePoint Online 2013
46
Supported Exchange Server Web Store connector targets
The Exchange Web Store connector supports the following Exchange Server targets:
■
Microsoft Exchange Server 2007 SP2 or earlier
For Exchange 2007 SP2 servers, you can either use the Exchange Web Store
connector or Exchange Web Services connector.
To use the Exchange Web Store connector, Outlook Web Access must be
configured, and WebDAV must be enabled.
The Exchange scan includes email message text and email file attachments from
the user’s mailbox.
You can scan the data objects that are stored within Public Folders, such as:
■
Email messages
■
Message attachments
■
Microsoft Word documents
■
Excel spreadsheets
The Exchange scan does not target mail stored in Personal Folders (.pst files) or
offline folders (.ost files) that are not on the Exchange server. To scan .pst files
on a file share, use the shared file system target.
Supported Exchange Server Web Services connector targets
The Exchange Web Services connector supports the following Exchange Server
targets:
■
Microsoft Exchange Server 2007 SP2 or later
For Exchange 2007 SP2 servers, you can either use the Exchange Web Services
connector or the Exchange Web Store connector.
■
Microsoft Exchange Server 2010
To use the Exchange Web Services connector, Exchange Web Services and the
Autodiscover Service must be enabled on your Exchange server and are accessible
to the Network Discover server.
You can scan the data objects that are stored within Public Folders, such as:
■
Email messages
■
Message attachments
■
Microsoft Word documents
■
Excel spreadsheets
47
The Exchange scan also targets mail stored in Exchange 2010 Personal Archives.
Supported file system scanner targets
The following remote Windows systems can be scanned:
■
Windows Server 2008
■
Windows Server 2012
The following Linux file systems can be scanned:
■
Red Hat Enterprise Linux 5.x
■
Red Hat Enterprise Linux 6.x
The following AIX file systems can be scanned:
■
AIX 5.3
■
AIX 6.1
AIX requires the following C run time libraries, as well as Java 1.5 and Java 7 JRE:
■
xlC.aix50.rte (v8.0.0.0+)
■
xlC.rte (v8.0.0.0+)
The following 32-bit Solaris file systems can be scanned (64-bit systems are not
supported):
■
Solaris 9 (SPARC platform)
■
Solaris 10 (SPARC platform)
Solaris requires the following patch levels for the scanner:
■
Solaris 9, 115697-01
http://sunsolve.sun.com/search/document.do?assetkey=1-21-115697-02-1
File systems on UNIX systems can also be scanned using the SFTP protocol. This
protocol provides a method similar to share-based file scanning, instead of using
the File System Scanner. Contact Symantec Professional Services for details.
Supported Documentum (scanner) targets
The Documentum scanner supports scanning a Documentum Content Server 5.3.x
or 6.6.x repository.
Supported Livelink scanner targets
The Livelink scanner supports scanning of Livelink Server 9.x targets.
48
Supported Web server (scanner) targets
The Web server scanner supports scanning of a static HTTP Web site.
Endpoint Data Loss Prevention is compatible with different operating systems and
software applications.
See “Endpoint Data Loss Prevention supported operating systems” on page 49.
See “Endpoint Prevent supported applications” on page 51.
Endpoint Data Loss Prevention supported operating systems
Endpoint Data Loss Prevention can operate on Endpoint systems that use the
following operating systems:
Table 3-5
Operating
system
Version
DLP Version
11.0
DLP Versions
DLP Version
11.1.x, 11.5, and 12.0
11.6
DLP Version
12.5
Windows XP
Professional
(32-bit)
SP2
Yes
Yes
Yes
No
SP3
Yes
Yes
Yes
No
SP2
Yes
Yes
Yes
Yes
R2
Yes
Yes
Yes
Yes
No
No
No
No
SP1
Yes
Yes
Yes
No
SP2
No
Yes
Yes
No
SP1
Yes (Windows 7
only, not SP1)
Yes (11.1.1 and
later only)
Yes
Yes
Windows Vista
unpatched
Enterprise (32-bit)
Windows 7
Enterprise,
Professional,
Ultimate (32-bit)
49
(continued)
Table 3-5
Operating
system
Version
DLP Version
11.0
DLP Versions
DLP Version
11.1.x, 11.5, and 12.0
11.6
DLP Version
12.5
Windows 7
Enterprise,
Professional,
Ultimate (64-bit)
SP1
Yes (Windows 7
only, not SP1)
Yes (11.1.1 and
later only)
Yes
Yes
Windows 8
Enterprise PC
operating system
(32-bit)
N/A
No
Yes (11.6.3 and
later only)
Yes (12.0.1 and
later only)
No
Windows 8
Enterprise PC
operating system
(64-bit)
N/A
No
Yes (11.6.3 and
later only)
Yes (12.0.1 and
later only)
Yes
Windows 8.1
Enterprise PC
operating system
(64-bit only)
Unpatched
No
No
Yes (12.0.1 and
later only)
Yes
Update 1
No
No
No
Yes
Update 2
No
No
No
Yes
SP2
Yes
Yes
Yes
Yes
R2
No
Yes
Yes
Yes
Windows Server R2
2008 Enterprise or
Standard (64-bit)
No
Yes
Yes
Yes
Windows Server
2012 Datacenter,
Standard,
Essentials, or
Foundation
(64-bit)
No
No
No
Yes (Desktop
mode only)
No
No
No
Yes
Windows Server
2003 (32-bit)
Apple Mac OS X
10.8 (64-bit)
R2
50
(continued)
Table 3-5
Operating
system
Version
DLP Version
11.0
DLP Versions
DLP Version
11.1.x, 11.5, and 12.0
11.6
DLP Version
12.5
Apple Mac OS X
10.9 (64-bit)
No
No
No
Yes
Apple Mac OS X
10.10 (64-bit)
No
No
No
Yes
Endpoint Prevent supported applications
This following table describes individual applications that can be monitored using
Endpoint Prevent.
Endpoint Prevent enables you to add monitoring support for other third-party
applications not listed in this table. Examples of third-party applications include
Skype, Thunderbird, and Google Chrome. Any application that is not specifically
monitored by Symantec Data Loss Prevention must be configured for application
monitoring before Symantec Data Loss Prevention can detect content with those
applications. Always test individual third-party applications before you enable
monitoring on a large number of endpoints. Individual applications may need
additional filtering settings to maintain acceptable performance. See the Symantec
Data Loss Prevention System Administration Guide for more information about
configuring and using application monitoring.
Applications supported by Endpoint Prevent
Table 3-6
Feature
Software Version
Symantec Data Loss Prevention
Version
10.0
Version
10.5
Versions
11.x
Version
12.0
Version 12.5
HTTP
All
browsers
All
Yes
Yes
Yes
Yes
Yes
Secure
HTTP
(HTTPS)
Internet
Explorer
6.0
Yes
Yes
Yes
Yes
Yes
7.0
Yes
Yes
Yes
Yes
Yes
8.0
Yes
Yes
Yes
Yes
Yes
51
Applications supported by Endpoint Prevent (continued)
Table 3-6
Feature
Software Version
Firefox
Version
10.0
Version
10.5
Versions
11.x
Version
12.0
Version 12.5
9.0
No
No
Yes (11.1.1
and later)
Yes
Yes
10.0
No
No
No
Yes (12.0.1
and later)
Yes
11.0
No
No
No
Yes (12.0.1
and later on
Windows 8.1
Enterprise
only)
Yes (Windows
7 and 8.1
Enterprise,
EPM disabled)
2.0
Yes
Yes
Yes
Yes
No
3.0
Yes
Yes
Yes
Yes
No
3.5
Yes
Yes
Yes
Yes
No
3.6
No
Yes
Yes
Yes
No
4.0
No
No
Yes (11.1.1
and later)
Yes
No
5.0
No
No
Yes (11.6 and
later, through
Application
Monitoring
[AFAC])
Yes (through
Application
Monitoring
[AFAC])
No
23 through No
32, 33.1,
34.0.5, and
35.0.1
No
No
No
Yes (33.1,
34.0.5, and
35.0.1 certified
on DLP Agent
version 12.5.2
on Windows 7
and 8.1)
Instant
Yahoo
7.5
messaging Messenger
Yes
Yes
Yes
Yes
Yes
8.0
Yes
Yes
Yes
Yes
Yes
8.1
Yes
Yes
Yes
Yes
Yes
52
Table 3-6
Feature
Software Version
Version
10.0
Version
10.5
Versions
11.x
Version
12.0
Version 12.5
9.0
Yes
Yes
Yes
Yes
Yes
10.0
No
Yes
Yes
No
Yes
11.0
No
No
No
No
Yes
Yes
Yes
Yes
Yes
No
9.0 (14)
Yes
Yes
Yes
Yes
No
5.9
Yes
Yes
Yes
Yes
Yes
6.0
Yes
Yes
Yes
Yes
Yes
6.1
Yes
Yes
Yes
Yes
Yes
6.5
Yes
Yes
Yes
Yes
Yes
6.8
Yes
Yes
Yes
Yes
Yes
6.9
Yes
Yes
Yes
Yes
Yes
1.4
Yes
Yes
Yes
Yes
Yes
1.5
Yes
Yes
Yes
Yes
Yes
2002
Yes
Yes
Yes
Yes
No
2003
Yes
Yes
Yes
Yes
Yes
2007
Yes
Yes
Yes
Yes
Yes
2010
No
No
Yes
Yes
Yes
2013
No
No
No
No
Yes
Outlook
2007
Web
Access
(rich and
light mode)
No
No
No
No
Yes
2010
No
No
No
No
Yes
MSN
8.1
Messenger
AIM
AIM Pro
Email
Outlook
53
Table 3-6
Feature
Software Version
Version
10.0
Version
10.5
Versions
11.x
Version
12.0
Version 12.5
No
No
No
No
Yes
Outlook.com
No
No
No
No
Yes
Eudora
No
No
No
No
No
Thunderbird
No
No
No
No
No
6.5
No
Yes
Yes
Yes
Yes
7.0
Yes
Yes
Yes
Yes
Yes
8.0
Yes
Yes
Yes
Yes
Yes
8.5
Yes
Yes
Yes
Yes
Yes
8.5.1
No
No
Yes (11.1.1
and later)
Yes
Yes
8.5.3
No
No
Yes (11.1.1
and later)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
BsClip
Yes
Yes
Yes
Yes
Yes
Bs
Recorder
Gold
Yes
Yes
Yes
Yes
Yes
BurnAware
Yes
Yes
Yes
Yes
Yes
Cheetah
Burner
Yes
Yes
Yes
Yes
Yes
Command
Burner
Yes
Yes
Yes
Yes
Yes
CopyToDVD
Yes
Yes
Yes
Yes
Yes
Creator10
Yes
Yes
Yes
Yes
Yes
2013
Lotus
Notes
FTP
CD/DVD
54
Table 3-6
Feature
Software Version
Version
10.0
Version
10.5
Versions
11.x
Version
12.0
Version 12.5
Deep
Burner
(32-bit
Windows
XP)
Yes
Yes
Yes
Yes
No
GEAR for
Windows
Yes
Yes
Yes
Yes
Yes
mkisofs
Yes
Yes
Yes
Yes
Yes
Nero
Yes
Yes
Yes
Yes
Yes
NeroStartSmart
Yes
Yes
Yes
Yes
Yes
Roxio
Yes
Yes
Yes
Yes
Yes
Roxio
RecordNow
Yes
Yes
Yes
Yes
Yes
Roxio5
Yes
Yes
Yes
Yes
Yes
Roxio
Mediahub
Yes
Yes
Yes
Yes
Yes
Silent
Night Micro
Burner
Yes
Yes
Yes
Yes
Yes
Star Burn
Yes
Yes
Yes
Yes
Yes
Windows
native
CD/DVD
writer
No
No
Yes
Yes
Yes
The following table lists the iOS applications and response rules that are supported
by Mobile Prevent. See the Symantec Data Loss Prevention Administration Guide
for more information on creating policies and response rules.
55
Mobile Prevent is not supported on Single Server installations.
Note: Applications for iOS are frequently updated. The following table lists the
application versions that have been verified for functionality with Mobile Prevent.
Mobile Prevent supports the following Web applications through the Safari Web
browser for iPads and iPhones (for iOS versions 6.0, 6.0.1, 6.1, 6.1.2, 6.1.3, and
7). This table also lists the supported type of response rules available for each Web
application. See the Symantec Data Loss Prevention Administration Guide for more
information on creating policies and response rules.
Table 3-7
Application
AOL
Facebook
Web applications supported by Mobile Prevent
iOS version
Symantec Data
Loss Prevention
version
Available Mobile Prevent
Response Rules
Notification Block
Content
Removal
4.3.x
12.0
Yes
Yes
Yes
5.0, 5.0.1, 5.1, 5.1.1
12.0
Yes
Yes
Yes
6.0, 6.0.1, 6.1, 6.1.2, 6.1.3 12.0
Yes
Yes
Yes
7
12.0
No
No
No
4.3.x
12.5
No
No
No
5.0, 5.0.1, 5.1, 5.1.1
12.5
No
No
No
6.0, 6.0.1, 6.1, 6.1.2, 6.1.3 12.5
No
No
No
7
12.5
Yes
No
No
4.3.x
12.0
Yes
Yes
Yes
5.0, 5.0.1, 5.1, 5.1.1
12.0
Yes
Yes
Yes
6.0, 6.0.1, 6.1, 6.1.2, 6.1.3 12.0
Yes
Yes
Yes
7
12.0
No
No
No
4.3.x
12.5
No
No
No
5.0, 5.0.1, 5.1, 5.1.1
12.5
No
No
No
6.0, 6.0.1, 6.1, 6.1.2, 6.1.3 12.5
No
No
No
7
No
No
No
12.5
56
Table 3-7
Application
Gmail
Windows Live Mail
Yahoo! Mail
Web applications supported by Mobile Prevent (continued)
iOS version
Symantec Data
Loss Prevention
version
Response Rules
Notification Block
Content
Removal
4.3.x
12.0
Yes
No
No
5.0, 5.0.1, 5.1, 5.1.1
12.0
Yes
No
No
6.0, 6.0.1, 6.1, 6.1.2, 6.1.3 12.0
Yes
No
No
7
12.0
No
No
No
4.3.x
12.5
No
No
No
5.0, 5.0.1, 5.1, 5.1.1
12.5
No
No
No
6.0, 6.0.1, 6.1, 6.1.2, 6.1.3 12.5
Yes
No
No
7
12.5
Yes
No
No
4.3.x
12.0
Yes
No
No
5.0, 5.0.1, 5.1, 5.1.1
12.0
Yes
No
No
6.0, 6.0.1, 6.1, 6.1.2, 6.1.3 12.0
Yes
No
No
7
12.0
No
No
No
4.3.x
12.5
No
No
No
5.0, 5.0.1, 5.1, 5.1.1
12.5
No
No
No
6.0, 6.0.1, 6.1, 6.1.2, 6.1.3 12.5
No
No
No
7
12.5
No
No
No
4.3.x
12.0
Yes
No
No
5.0, 5.0.1, 5.1, 5.1.1
12.0
Yes
No
No
6.0, 6.0.1, 6.1, 6.1.2, 6.1.3 12.0
Yes
No
No
7
12.0
No
No
No
4.3.x
12.5
No
No
No
5.0, 5.0.1, 5.1, 5.1.1
12.5
No
No
No
Yes
Yes
Yes
6.0, 6.0.1, 6.1, 6.1.2, 6.1.3 12.5
57
Table 3-7
Application
Web applications supported by Mobile Prevent (continued)
iOS version
Twitter
Symantec Data
Loss Prevention
version
Response Rules
Notification Block
Content
Removal
7
12.5
Yes
Yes
Yes
4.3.x
12.0
Yes
Yes
Yes
5.0, 5.0.1, 5.1, 5.1.1
12.0
Yes
Yes
Yes
6.0, 6.0.1, 6.1, 6.1.2, 6.1.3 12.0
Yes
Yes
Yes
7
12.0
No
No
No
4.3.x
12.5
No
No
No
5.0, 5.0.1, 5.1, 5.1.1
12.5
No
No
No
6.0, 6.0.1, 6.1, 6.1.2, 6.1.3 12.5
No
No
No
7
No
No
No
12.5
The following iOS components and applications are not supported in this release
of Symantec Data Loss Prevention Mobile Prevent:
■
SMTP and IMAP messaging
■
iCloud functionality
■
iTunes wireless synchronization
Note: iTunes synchronization is supported using a USB cable. See the
documentation that comes with your mobile device for more information.
■
Netflix for iPad application
The following two tables provide compatibility information for Mobile Email Monitor.
Table 3-8 list the Microsoft Exchange ActiveSync versions that are compatible with
Symantec Data Loss Prevention Mobile Email Monitor on various devices.
58
Note: Symantec Data Loss Prevention Mobile Email Monitor is not supported on
Microsoft Exchange ActiveSync versions compatible with Mobile
Email Monitor
Table 3-8
ActiveSync Versions
Devices
Mail Applications
Microsoft Exchange ActiveSync 2003 Samsung Galaxy S3
Android native email
HTC
Google
Motorola
Microsoft Exchange ActiveSync 2007 iPad
iOS native email
iPhone
Samsung Galaxy S3
HTC
Google
Motorola
Microsoft Exchange ActiveSync 2010 iPad
iOS native email
iPhone
Samsung Galaxy S3
HTC
Google
Motorola
Table 3-9 lists the devices and operating systems that are compatible with Symantec
Data Loss Prevention Mobile Email Monitor.
Table 3-9
Mobile devices and operating systems and compatible with Mobile
Email Monitor
Device
Operating systems
iPhone
iOS
iPad
iOS
Samsung Galaxy S3
Android Jelly Bean 4.1, 4.2, 4.3
59
Table 3-9
Mobile devices and operating systems and compatible with Mobile
Email Monitor (continued)
Device
Operating systems
HTC
Google
Motorola
60

Symantec™ Data Loss Prevention System Requirements and

Transcription

Similar documents

Document 6562494

Security Intelligence University/Symantec Research Intelligence

Antivirus - Marshall University

Symantec Identity: Access Manager Data Sheet: Identity

Confidence In A Connected World

Symantec™ System Recovery 2013 The gold standard in System Recovery

Symantec™ Messaging Gateway Small Business Edition

Symantec