10...72 kWe powered by

10...72 kWe powered by
Characteristics
Code
15SI-44F
COP
[kWe]
COP
[kVA]
Engine
Power
[kWm]
Cylinders
Bore/Stroke
[mm]
10
12.5
13
3 in line
84/900
Displace
Fuel
ment
consumption
[cm3]
[l/h]
1496
TBD
Fuel tank
capacity
[l]
Engine speed
[rpm]
Dimensions LxWxH
[mm]
Dry Weight
[kg]
Dimensions in canopy
[mm]
Weight with
canopy
[mm]
100
1500
1800x725x1338
1081
-
-
22SI-144D
16
20
18
4 in line
84/100
2216
TBD
100
1500
1800x725x1338
1126
-
33SI-144E
25
31
32
3 in line
105/127
3300
TBD
100
1500
1800x725x1338
1141
-
-
44SI-144K
34
42.5
43
4 in line
105/127
4410
TBD
-
1500
2200x725x1338
1221
-
-
1500
2200x725x1338
1251
-
-
1500
2200x725x1338
1484
-
-
60SI-224E
48
60
54
6 in line
100/127
5990
TBD
-
70SI-224F
72
90
80
6 in line
105/127
6600
TBD
-
Continuous power is defined as being the maximum power which the generating set is capable of delivering continuously
whilst supplying a constant electrical load when operated for an unlimited number of hours per year under the agreed
operating conditions with the maintenance intervals and procedures being carried out as prescribed by the manufacturer.
The manufacturer reserves the right to make changes at any time, without notice,
as to technical data, prices, materials, standard equipment, specifications
and models, and to discontinue models. The generating set illustrated may
not be entirely identical to production standard.
ZXS-2015-10-100-1502023-00
KVT Gas delivers
customers reliable power
from proven diesel engine
technology making the
installation versatile, quiet
and clean. The gas engines
are based on Perkins diesel
engines and therefore
compact and reliable, for
use as standby, prime or
continuous power
generation, as well as coand trigeneration CHP. They
also offer them engines for
variable speed applications
such as material handling
equipment. Available for use
with Natural gas, CNG,
LPG also Bio, syn gas and
other process gases. KVT
uses specially designed
components
to make the engine much
more structurally robust than
any other conventional
spark ignition
engine. The combustion
chamber components are
designed to withstand high
cylinder temperatures and
peak pressures. This lowers
the stress levels resulting in
longer service life,
higher reliability and lower
maintenance costs.
STANDARD EQUIPMENTS
Base Frame:
- mechanically welded chassis
- w or w/o fluid recovery tank
- antivibration dampers
Engine:
- 4 stroke industrial water cooled, spark ignition engine;
- 1500 rpm with mechanical/electronical governor;
- heat-exchanger or radiator with drain tap;
- standard air filter;
- protective grille for fan and rotating parts.
Alternator:
- brushless syncrhonous alternator;
- single bearing;
- IP23 up to 145 kVA;
- overload acceptance: 10% for 1 hour;
- AVR 0.5%;
- insulation class H, temperature rise class F;
- 231/400 V, 50Hz;
Engine Control Panel:
- microprocessed electronic controller;
- built-in governor control;
- automatic speed control;
- manual speed control via push buttons, digital input
or analogue input;
- automatic speed ramping;
- remote panel for control and monitoring.
Generating Set:
- exhaust compensator with brackets or pipe;
- double walled fuel line with leakage device;
- closed crankcase ventilation;
- oil drainage pump;
- 15 dB(A) silencer supplied separately
- air fuel ratio control & actuator
- complete ignition kit
- ignition coils
- stop valve & fuel level transducer
- pressure regulator & vaporisateur
ZYRAXES S.R.L.
76 Drumul Cretestilor str., 4th sector, 042183 code, Bucharest - Romania
Tel: +40(0)745 343735, +40(0)31 4250720; Fax: +40(0)31 4250721
e-mail: office@zyraxes.ro; www.zyraxes.ro