Requirements for installing RTIFPGA

dSPACE FAQ 295
FAQ 295
Requirements for installing RTIFPGA
Keywords
RTIFPGA; MATLAB; DS5203; MicroAutoBox II; DS1511; DS1512; DS1552; Xilinx; ISE;
SystemGenerator
Question
I have purchased dSPACE RCP&HIL with RTIFPGA. Which third party software is needed and is
there a prescribed order of installation?
Solution
1. Third party software required
RTIFPGA requires Xilinx System Generator (XSG) and Xilinx ISE or Vivado for generation of VHDL
code and its synthesis. Since ISE 11 XSG is part of ISE/ Vivado installer. Within installation, please
select a version containing XSG. This typically is “System Edition”.
Usage of (free of charge) WebPack-Edition is only possible when working with DS5203 LX50 or
DS2655 hardware. In this case, please ensure that XSG is installed separately when using RTIFPGA
blockset.
XSG versions compatible with RTIFPGA depend on version of RCP&HIL/ RTIFPGA you use. Detailed
information regarding software compatibility can be found in “NewFeaturesAndMigration.pdf”. This
document is stored on dSPACE DVD within \Doc\Print – folder.
MATLAB compatibility is restricted when using RTIFPGA. For further information, please also refer to
“NewFeaturesAndMigration.pdf”.
When using a 32-bit MATLAB version, you need to use 32-bit versions of Xilinx tools. When using 64bit Windows and 32-bit MATLAB, please ensure that 32-bit installer of Xilinx ISE is used. You find the
32-bit installer xsetup.exe in <Xilinx_setup_directory>\bin\nt.
Please note that 32-bit version of Vivado can only be used with Windows 7 32-bit. The consequence is
that you need to use the 64-bit tool chain when working with Windows 7 x64 and Vivado.
2. How to install RTIFPGA
RTIFPGA blockset is part of dSPACE RCP&HIL software. The blockset is installed with dSPACE
setup. There is no sequence which has to be maintained when installing RCP&HIL and third party
tools needed.
Please note that you need RTIFPGA license (contained in license.dsp and keys.dsp files) within
installation process in case you want to view or edit FPGA designs. For downloading and working with
FPGA designs, you do not need RTIFPGA license. When installing RTIFPGA without RTIFPGA
license the FPGA Interface library will not be part of dSPACE RCP&HIL installation.
Requirements for installing RTIFPGA
FAQ Version: 14 / 2015-03-04
Page 1
dSPACE FAQ 295
3. Example of how RTIFPGA can be installed
A common sequence of installation is as follows

Install MATLAB (32-bit or 64-bit)

Install Xilinx ISE / Vivado (32-bit or 64-bit, compatible with MATLAB version) containing XSG
o

Install dSPACE RCP&HIL (32-bit or 64-bit, compatible with MATLAB version)
o

Connect XSG to MATLAB within installation process
Activate MATLAB Version, which has been connected to XSG before within
installation
Start MATLAB and check if XSG and RTIFPGA have been connected correctly using the
commands xlVersion and rtifpgaver.
4. Working with RTIFPGA
When working with RTIFPGA, it is recommended to start MATLAB via shortcut generated by Xilinx
setup. This shortcut can be found within Windows’ Start-menu and is named “System Generator”.
Requirements for installing RTIFPGA
FAQ Version: 14 / 2015-03-04
Page 2
dSPACE FAQ 295
5. Table of compatible software Versions
dSPACE Release
RTIFPGA
Programming
Blockset
Version
Operating System
MATLAB
R2013b, R2014a,
R2014b
2015-A
2.9
Windows 7 (32/64-bit)
(32/64-bit)
Windows 7 (32/64-bit)
Windows 7 (32/64-bit)
Windows XP (32-bit)
2014-A SP23)
(32/64-bit)
(32/64-bit) 8)
Windows XP SP3 (32-bit)
2013-B
2.6.2
Windows 7 (32/64-bit)
Windows 7 (64-bit)
Windows 7 (32/64-bit),
Windows XP SP3 (32-bit)
2013-A SP33)
(32/64-bit)
Vivado 2014.2
(32/64-bit) 9)10)
R2013a, R2013b
ISE 14.7
(32/64-bit)
(32/64-bit) 8)
R2012b, R2013a,
R2013b (32-bit)
ISE 14.7
(32-bit)
2.7.1
Windows 7 (64-bit)
SP23)
(32/64-bit) 9)10)
ISE 14.7
R2014a
2.8.1
Vivado 2014.4
R2013b
R2013a, R2013b,
2014-B SP13)
Xilinx Design
Tools
(ISE/XSG,
Vivado)
R2012b, R2013a,
R2013b (64-bit)
ISE 14.7
(64-bit) 8)
R2012a, R2012b (32bit)
ISE 14.6
R2012a, R2012b,
R2013a (32-bit)
(32-bit) 7)
R2012b, R2013a (64bit)
R2011b, R2012a,
R2012b (32-bit)
ISE 14.6
(64-bit) 7)
ISE 14.4
(32-bit)4)6)
2.5.2
ISE 14.4
Windows 7 (64-bit)
Requirements for installing RTIFPGA
FAQ Version: 14 / 2015-03-04
Page 3
R2012b (64-bit)
(64-bit)4)6)
dSPACE FAQ 295
dSPACE Release
RTIFPGA
Programming
Blockset
Version
Operating System
MATLAB
R2011a, R2011b
(32-bit)
7.4
SP33)
2.4.1
Windows 7 (32-bit and 64-bit),
Windows XP SP3 (32-bit)
R2010bSP21),
R2011a, R2011b
(32-bit)
Xilinx Design
Tools
(ISE/XSG,
Vivado)
ISE 14.1
(32-bit) 5)
ISE 13.4
(32-bit) 5)
R2010a1),
R2010bSP11),
7.3
2.3
Windows 7 (32-bit and 64-bit),
R2010bSP21),
Windows XP SP3 (32-bit)
R2011a, R2011b
ISE 13.4
(32-bit) 5)
(32-bit)
Windows Vista Business SP2
(32-bit),
R2009bSP11),
Windows XP SP3 (32-bit)
R2010a,
ISE 12.4
R2010bSP11),
(32-bit)
R2010bSP21) (32-bit)
R2010a1),
Windows 7 (32-bit and 64-bit),
Windows XP SP3 (32-bit)
7.2 SP13)
2.2.17
R2010bSP11),
R2010bSP2 (32-bit)1)
ISE 13.4
(32-bit) 5)
R2009a1),
Windows Vista Business SP2 (32-
R2009bSP11),
bit and 64-bit),
R2010a,
Windows XP SP3 (32-bit)
R2010bSP11),
ISE 12.4
(32-bit)
R2010bSP21) (32-bit)
Windows 7 (32-bit and 64-bit),
R2010a, R2010bSP1,
Windows XP SP3 (32-bit)
(32-bit)
ISE 13.2
(32-bit) 2)
R2009a1),
7.2
2.2
Windows Vista Business SP2 (32-
R2009bSP11),
bit and 64-bit),
R2010a,
Windows XP SP3 (32-bit)
R2010bSP11),
ISE 12.4
(32-bit)
R2010bSP21) (32-bit)
R2009a1),
7.1
2.1
Windows Vista Business SP2 (32-
R2009bSP11),
bit and 64-bit),
R2010a,
Windows XP (32-bit)
R2010bSP11)
ISE 12.4
(32-bit)
(32-bit)
Windows XP (32-bit)
Requirements for installing RTIFPGA
FAQ Version: 14 / 2015-03-04
Page 4
R2007b+, R2008a+
ISE 10.1.03
dSPACE FAQ 295
1) Tested
by dSPACE but not officially supported by Xilinx.
2) Please
contact dSPACE Support for getting software update providing support of Xilinx ISE 13.4
3) Installer
of Implementation-Software ServicePack is available at
http://www.dspace.com/goto?patchessfc
4) When
using Xilinx ISE 14.4 it is strongly recommended to install following patch:
http://www.xilinx.com/support/answers/54065.htm
5)
When using Xilinx ISE 14.1 or 13.4 it is strongly recommended to install following patch:
http://www.xilinx.com/support/answers/50973.htm
6)
When using Xilinx ISE 14.4 as WebPack-Version, please install following patch:
http://www.xilinx.com/support/answers/53695.htm
7)
When using Windows7, Xilinx ISE 14.6 and MATLAB R2013a it is strongly recommended to install
following patch: http://www.xilinx.com/support/answers/56250.html
8)
When using Xilinx ISE 14.7 with a license file, the license should not be placed in \.Xilinx folder.
Please also refer to: http://www.xilinx.com/support/answers/61341.html
9)
Please check if the hardware platform you are using is compatible with Xilinx Vivado. Please
compare table at point 7). At the moment only dSPACE MicroLabBox can be used with Xilinx Vivado.
10)
The 32-bit Version of Vivado runs only on 32-bit operating systems and not on 64-bit operating
systems.
Requirements for installing RTIFPGA
FAQ Version: 14 / 2015-03-04
Page 5
dSPACE FAQ 295
6. Support of DS2655 / SCALEXIO
DS2655 FPGA Board is supported with dSPACE Release 2013-B with Service Pack 11 installed. If you
want to use your DS2655 FPGA Board with dSPACE Release 2013-A, please contact dSPACE
Support at support@dspace.de.
7. Software requirements of dSPACE FPGA Hardware
dSPACE Hardware Platform
DS5203 (SX95)
DS5203 (LX50)
DS5203 (7K325 or 7K410)
Required Xilinx Design Tools Version
ISE 10 to 14
ISE 10 to 14
ISE 14 (Vivado support planned)
MicroAutoBox II with DS1512
ISE 11 to 14
MicroAutoBox II with DS1514
Vivado 2014 or later
DS2655 FPGA Base Module
ISE 13 to 14 (Vivado support planned)
MicroLabBox
Vivado 2014 or later
8. Hardware recommendation
For building models containing RTIFPGA blocks, we recommend to use a computer which has a high
single-thread performance. We also recommend to use a computer, which is equipped with 8 to 16GB
RAM.
When using Xilinx Vivado or dSPACE platforms with Kintex 7 FPGA, we recommend to use a 64-bit
version of Windows, MATLAB, Xilinx and dSPACE software. We also recommend to use a computer
equipped with 16GB RAM in this case.
1
Service Pack 1 for dSPACE Release 2013-B is available at www.dspace.com/go/patchessfc
Requirements for installing RTIFPGA
FAQ Version: 14 / 2015-03-04
Page 6
dSPACE FAQ 295
Related FAQs
---
Requirements for installing RTIFPGA
FAQ Version: 14 / 2015-03-04
Page 7
dSPACE FAQ 295
How to Contact dSPACE Support
dSPACE GmbH
Rathenaustraße 26
33102 Paderborn
Germany
++49 5251 1638-941
mailto:support@dspace.de
http://www.dspace.com/support
dSPACE recommends that you use the support request form on the Internet to contact
dSPACE Support.
It is available at:

http://www.dspace.com/go/supportrequest
Software Updates and Patches
dSPACE strongly recommends that you download and install the most recent patches for your
current dSPACE installation. Visit http://www.dspace.com/go/patches for software updates
and patches.
FAQ
FAQ documents are available at http://www.dspace.com/go/faq.
Important Notice
This document contains proprietary information that is protected by copyright. All rights are
reserved. Neither the documentation nor software may be copied, photocopied, reproduced,
translated, or reduced to any electronic medium or machine-readable form, in whole or in part,
without the prior written consent of dSPACE GmbH.
© Copyright 2015 by:
dSPACE GmbH
Rathenaustraße 26
33102 Paderborn
Germany
This publication and the contents hereof are subject to change without notice.
A list of registered dSPACE trademarks is available at:
http://www.dspace.com/go/Trademarks
Requirements for installing RTIFPGA
FAQ Version: 14 / 2015-03-04
Page 8