DAVIES SUPRAFLOOR RAFLOOR

DAVIES SUPRAFLOOR
Self- Leveling Epoxy Floor Coating
Description
A solvent-free trowellable epoxy floor coating designed for floors to give a smooth
tile-like finish without joints which are subjected to heavy mechanical wear and
extreme chemical spillage.
Main Features
Suitable for the protection and decoration of interior concrete floors
Non-Pollutant- contains no solvent Smooth tile-like finish
Properties
Appearance
Color Range
Theoretical Coverage
Drying Time @ 28°C
Pack Sizes
Shelf Life
Application
: Glossy
: 9 standard colors, other colors per request
SF-00 White SF-21 Classic Blue SF-40 Canary Yellow
SF-10 Rustic Red SF-30 Mint Green SF-61 Velvet Gray
SF-20 Misty Blue SF-31 Tropical Green
SF-90 Sand Beige
: 1 mm thickness 4 m2/4L, 2 mm thickness 2 m 2/4L,
3mm thickness 1.33 m 2 /4L
: Light foot traffic after 24 hours. Full hardness
after 7 days.
: 4 liter can set
: One year when stored in dry cool conditions, out of
direct sunlight.
Apply by trowel or squeegee
Mixing Direction
Mixing Ratio
Pot Life @ 280C
Thinning / Cleaning
:Stir both components well before mixing. Add catalyst
to base and mix slowly but thoroughly for 10- 15
minutes. It is better to transfer contents to a bigger
container for easy and homogeneous mixing.
: 3 parts base to 1 part catalyst by volume
: 1 – 1 1/2hours
Use DAVIES 95 Epoxy Reducer for cleaning only. DO
NOT ADD REDUCER to
; Suprafloor mixture
1
DAVIES SUPRAFLOOR
Self- Leveling Epoxy Floor Coating
Specification
Painting System
Concrete Surfaces
1.
Seal with one coat of DAVIES Eposeal-Epoxy Penetrating Sealer by brush
or roller and let dry for 5-24 hours
Option 1 Plain Finish without aggregates. Proceed to Step 2 & 3.
Option 2 Non-Skid Finish- Broadcast anti skid additive on still wet Eposeal at 1
kilo/m2 and let it dry overnight When dry, dust-off excess additives. Then
proceed to step 3.
Option 3 Plain Finish with Aggregates - Adding aggregates on the Suprafloor
mixture at ratio of 3:1:1 byvolume (Base : Hardener : Aggregates). Apply by
trowel or squeegee. While still wet, finish off with a spiked roller to remove air
bubbles and level-off at the same time.
2.
When necessary, putty hollow surfaces with DAVIES Epopatch - Epoxy
Patching Compound. Mix Ratio (Base : Hardener) 1:1 by volume
3.
Finish with one coat of DAVIES SUPRAFLOOR by trowel or squeegee. While
still wet, finish off with a spiked roller to remove air bubbles and level-off at
the same time. Let dry overnight.
Steel Surfaces
1.
2
Apply one coat of DAVIES Epoxy Primer by brush or roller and let it dry.
Finish with one coat of DAVIES SUPRAFLOOR by trowel or squeegee.
While still wet, finish off with a spiked
MAIN OFFICE
1387-A Mercedes Ave.
San Miguel, Pasig City 1600
Tel. (02) 641-7101 / Fax. 641-9004
Customer Care Hotline: (02) 570-7000
MARKETING OFFICE & SHOWROOM
207 Banawe St., Quezon City
Tel. (02) 740-8386 to 87 / Fax. 740-6957
customercare@daviespaints.com.ph
www.daviespaints.com.ph
2