the schedule - Materialise World Conference

the schedule - Materialise World Conference

23.04
08h30 - 10h00
Last Update 18.03.2015
Mimics® Innovation Summit
Engineering on AnatomyTM & 3D Printing for Research and Hospital Communities
KEYNOTE SESSION FOR ALL CONFERENCE ATTENDEES
REGISTRATION
& COFFEE & COFFEE REGISTRATION
10h00 - 10h30
KEYNOTE 1: Official Welcome by Wilfried Vancraen, CEO Materialise, Belgium
10h30 - 11h00
KEYNOTE 2: 3D Printing: The Next 25 Years by Prof. Hod Lipson, Prof. of Engineering, Cornell University, USA
11h00 - 11h30
KEYNOTE 3: Additive Manufacturing in the EU Research Framework Programmes by Clara de la Torre, Director for KETs, RTD/D, European Commission Keynote Speaker, Belgium
11h30 - 12h00
KEYNOTE 4: Additive Manufacturing State of the Industry by Terry Wohlers, Principal Consultant & President, Wohlers Associates, Inc. - Keynote Speaker, USA
12h00 - 12h30
Networking moment for medical professionals
12h30 - 14h15 NETWORKING LUNCH
TO MAINSTREAM
TRACK 1 EXTREME
3D PRINTING IN HOSPITALS
TRACK 2
INNOVATIVE USES WITH
THE MIMICS INNOVATION SUITE
14h15 - 14h50
3D Printing Bones in Archaeology:
From Stonehenge to Digitized Diseases
Dr. Andrew Wilson
Senior Lecturer in Forensic & Archaeological
Sciences, University of Bradford, UK
14h50 - 15h10
The Mimics Innovation Suite: A Key Tool in Natural Sciences
Florent Goussard
Scientific Imaging Engineer, Muséum National
d’Histoire Naturelle, France
15h10 - 15h30
Three Dimensional Skull and Face Models
and Measurements for Forensic Anthropology using Mimics
Prof. Dr. U-Young Lee
Associate Professor, The Catholic University
of Korea, South Korea
15h30 - 15h50
Multi-Material Temporal Bone Modeling for
Surgical Rehearsal and Education
Caroline Webster
Doctoral Student, North Carolina State University, USA
Coffee break
15h50 - 16h30
Coffee break
16h30 - 17h00
Keynote: 3D Printing in Facial Deformity, a New Frontier
Prof. Dr. Maurice Mommaerts
Head European Face Centre, University Hospital Brussels, Belgium
16h30 - 16h50
The Translation of Engineering Principles to Clinicians
Dr. Peter Theobald, Lecturer, Cardiff University, UK
17h00 - 17h20
Integration of Computer Imaging and
Additive Layer Manufacture in Head & Neck Reconstruction
Dr. Muhanad Hatamleh
Senior Maxillofacial Prosthetist / Reconstructive Science,
King’s College London, UK
16h50 - 17h10
Metacarpophalangeal Joint Injection Using
a 3D-Printed Model
Dr. John Burford
Assistant Professor in Equine Surgery,
University of Nottingham, UK
17h20 - 17h40
From 3D Planning to Patient-Specific Surgery: A Paradigm
Shift of Limb Salvage Operation in Orthopaedic Oncology
Dr. Kwok Chuen Wong, Prince of Wales Hospital, Hong Kong
17h10 - 17h30
17h40 - 18h00
Additive Manufacturing and Design: Key Points
in Developing Patient-Specific Maxillofacial Prosthesis
Gerrie Booysen
Director CRPM, Central University of Technology, South Africa
Dr. Cules van den Heever
Prosthodontist, University of Pretoria/Central University
of Technology, South Africa
14h15 - 14h45
Keynote: Contribution of a 3D-Printed Model in the Surgical
Planning of Complex Congenital Heart Disease
Prof. Dr. Marc Gewillig
Paediatric Cardiologist, University Hospital Leuven, Belgium
14h45 - 15h05
Title to be Confirmed
Dr. Colin McMahon
Paediatric Cardiologist, Our Lady’s Children’s Hospital, Ireland
15h05 - 15h25
3D Printing in Complex Congenital Cardiac Anomalies
Prof. Dr. Issam El-Rassi
Cardiac Surgeon, American University of Beirut Medical School,
Lebanon
15h25 - 15h45
15h45 - 16h05
16h05 - 16h30
Feasibility of 3D Printing Cardiac Structures
From Ultrasound
Alex Pearce, Chief Cardiac Physiologist, Papworth Hospital, UK
Title to be Confirmed
Prof. Dr. Mario Carminati
Director of Paediatric Cardiology Unit, San Donato Milanese
Hospital, Italy
18h00 - 18h20
3D Printing Technology in Medical Design and Manufacturing
Prof. Dr. Erbil Oguz
GATA-MDMC Director, Gülhane Military Medical Academy, Turkey
18h20 - 18h40
Orthopaedic Surgical Navigation Assisted by
Patient-Specific Registration Guides
Prof. Facundo Pedemonte
Head of the Biomedical Design Department, RAOMED SA, Argentina
18h40 - 19h00
Closing Remarks
19h00 - 22h00
17h30 - 17h50
17h50 - 18h10
Coffee break
TRACK 3
THE QUEST FOR BETTER IMPLANTS
AND ACCURATE PLACEMENT
16h30 - 16h50
Use of a Three-Dimensional Simulation
Model to Determine the Etiology of Voiding Dysfunction
Prof. Dr. Shigehiro Soh
MD, PhD, Dokkyo Medical University
Koshigaya Hospital, Japan
Looking Back on Accuracy Studies
for Total Knee Arthroplasty
Dr. Sebastian De Boodt
Product Manager Orthopaedics & CMF,
Materialise, Belgium
16h50 - 17h10
Additive Manufacturing for Patient Specific
Limb Sparing Endoprostheses
Dr. Timothy Horn
Research Assistant Professor, Center for Additive Manufacturing
and Logistics: North Carolina State University, USA
A Crash Course in “Accuracy”
Prof. Ir. Jos Vander Sloten
Chairman, Division of Biomechanics and
Engineering Design, University of Leuven, Belgium
17h10 - 17h30
Computational Modeling of Critical-sized Tibial Defects and
Prediction of the Safety of Fixator Removal
Dr. Nicola Kelly
Lecturer in Biomedical Engineering, National
University of Ireland, Ireland
Overview of Existing Post-Operative Implant
Position Measurement Methods
Dieter Vangeneugden
Clinical Hardware Manager, Materialise, Belgium
17h30 - 19h00
Closing Remarks and Continuated Discussion
at the Accuracy Booth (Grand Hall 2)
18h10 - 18h30
To be Confirmed
18h30 - 19h00
Closing Remarks
NETWORKING DINNER & EVENING EVENT
All World Conference visitors are welcome to join Materialise in opening the exhibition MAKING A DIFFERENCE / A DIFFERENCE IN MAKING
on the evening of April 23rd at BOZAR Centre for Fine Arts (Just a 5 minute walk from the SQUARE venue and Brussels Central Station).
• Exclusively for attendees of the Materialise World Conference or special invites
• Introduction by curator Marta Malé-Alemany followed by a walking dinner
You can enter the vernissage with your conference badge or conference ticket. Or register on-site if you are on the guest list.
GET YOUR TICKET
TRACK 4 TRACK 5
24.04
08h00 - 09h00
plenary SESSION
REGISTRATION
& COFFEE & COFFEE REGISTRATION
Last Update 18.03.2015
Mimics® Innovation Summit
Engineering on AnatomyTM & 3D Printing for Research and Hospital Communities
09h00 - 09h30
Opening Speech Day 2 - Mimics Innovation Summit by Wilfried Vancraen CEO Materialise, Belgium
09h30 - 10h00
Plenary Session Mimics Innovation Summit by Dr. Bryan Kirking Biomechanics & Testing Scientist, DJO Surgical, USA
10h00 - 10h30
A Regulatory History and FDA Perspectives on Additive Manufacturing of Medical Devices by James Coburn Senior Regulatory Research Engineer, US Food and Drug Administration, USA
10h30 - 11h15
Coffee break
Coffee breaK
TRACK 4
EVIDENCE BASED R&D
TRACK 5
INNOVATING DEVICE DESIGN
WITH MEDICAL IMAGE DATA
11h15 - 11h50
Keynote: Anatomical Challenges of
Transcatheter Heart Valve Design
Dr. Cindy Clague
Research Director, Medtronic Coronary & Structural Heart, USA
11h15 - 11h45
Keynote: Using Medical Images and Computational Models
to Improve Patient Care in Orthopaedics
Prof. Dr. Ir. Nico Verdonschot
Professor in Biomechanics, Radboud University Medical Center, The Netherlands
11h50 - 12h20
Simulative Balloon Angioplasty on 3D Virtual Models
to Predict Coronary Artery Compression
During Melody Valve Placement
Dr. Puneet Bhatla
Director of Congenital Advanced Noninvasive Imaging, NYU
School of Medicine, USA
11h45 - 12h15
Keynote: Utilizing Medical Imaging to Guide Design
in Total Joint Arthroplasty
Dr. Jeffrey Bischoff
Staff Engineer, Extremities Research Manager, Zimmer, USA
12h15 - 12h45
Keynote: Advanced Imaging, Preoperative Planning and Post
Operative Evaluation of Orthopedic Surgeries
Joseph Lipman
Director of Device Development, Hospital for Special Surgery, USA
NETWORKING LUNCH
12h45 - 14h00
NETWORKING LUNCH
Surgical Education and Training:
From Textbook to Real World Simulation
Dr. Lieven Maene
Vascular Surgeon, Our Lady’s Hospital Aalst, Belgium
14h00 - 14h20
Utilizing Population-Based Data to Drive the Design of a Novel Shoulder Arthroplasty Implant
John Kapitan
President, Kapstone Medical, LLC, USA
14h20 - 14h40
Virtual and Physical Population Models for Design, Testing and Workshops
Louise Mansson - Sawbones, Sweden
14h40 - 15h00
Ankle Biomedical Orthopaedic Device Biomechanical Testing Using
3D-Printed Pathological Anatomy
Dr. William Parr
Post Doctoral Research Fellow, Medical Design and Manufacturing Center,
University of New South Wales, Australia
15h00 - 15h20
Computational Model of Foot and Ankle for Evaluation of Ankle Arthroplasty Surgery
Prof. Ming Zhang - Professor at The Hong Kong Polytechnic University, Hong Kong
15h20 - 15h40
Reducing the Risk of Fracture in Calcaneal Bone Graft Harvest:
a Finite Element Analysis Study Following Corticocancellous Bone
Dr. Helen Ingoe - Trauma and Orthopaedics Trainee Registrar, Cardiff University, UK
15h40 - 16h15
Coffee breaK
16h15 - 16h35
CAD-BONE: Patient-Specific Prediction of Fracture Risk and Evaluation of Bone Healing for
Realistic 3D Oblique Fractures
Dr. Jesús Angel Alierta - Researcher, University of Zaragoza, Spain
Prof. Maria Angeles Perez - Associate Professor, University of Zaragoza, Spain
16h35 - 16h55
The Effect of Soft Tissues on Hip Biomechanics
Mohammadreza Yazdifar
PhD Student at Brunel University, UK
16h55 - 17h15
Advances in Personalized Musculoskeletal Modeling
Pavel Galibarov
Senior Consultant, AnyBody Technology A/S, Denmark
17h15 - 17h35
Development of Custom-Made System of TMJ Prosthesis and Reconstruction Plates for
Microvascular Grafts in Patients with Maxillofacial Defects
Tatiana Rios
Research Coordinator, Industrias Médicas Sampedro, Colombia
17h35 - 18h00
Closing Remarks
12h20 - 12h45
12h45 - 14h00
14h00 - 14h30
Prototyping the Next Generation of Smart Catheters
Thanks to Realistic Artificial Mockups
Dr. Emmanuel Vander Poorten
Postdoctoral Researcher, University of Leuven, Belgium
14h30 - 15h00
Quantifying Boundary Conditions and Developing Test Models for the Next Generation Thoracic Stent Grafts
Dr. Srinivasan Varahoor
Principal R&D Engineer, Medtronic, USA
15h00 - 15h30
Development of a Virtual Beating Arterial Model for Early
Stage Usability Testing
Kevin O’Sullivan
Researcher, University of Limerick, Ireland
15h30 - 16h15
Coffee break
16h15 - 16h45
The Clinical Benefits from 3D Modeling & Printing for Left
Atrium Appendage Closure (LAAC) Procedure
Yi Qun Zhang
Senior Professional Education Specialist, Boston Scientific, China
16h45 - 17h15
3D Printing Congenital Heart Disease in Clinical Practice:
Is it Feasible?
Dr. Giovanni Biglino
Research Fellow, University College London, UK
17h15 - 17h45
17h45 - 18h00
Combining Imaging and Computational Model for Early
Stage Usability Testing
Dr. Tim Kaufmann
Research Associate, Enmodes/RWTH , Germany
Closing Remarks
GET YOUR TICKET
TRACK 1 TRACK 2 TRACK 3