GX2 Control Module (CM100B) Data Sheet

OmniStar® GX2
Headend Optics Platform
GX2‐CM100B
Control Module
FEATURES
• Provides Quick‐Swap capabilities where replacement modules are recognized and updated with the previous settings
• Internal subagent allows communication with SNMP and requires no proprietary software
• Downloadable firmware with redundant banks for optimal operation
• Two Ethernet ports for communication with local PC and standard network management system
• Hot‐swappable with blind mating to OmniStar GX2 Housing
• Contact closure relay for external alarm capability
PRODUCT OVERVIEW
The GX2‐CM100B Control Module is the nucleus of the intelligent OmniStar® GX2 optical broadband transmission platform.
The GX2‐CM100B Control Module supervises all the application modules and power supplies within the OmniStar GX2 housing. It also serves as the communication gateway between the modules and the various user interfaces. Three tri‐colored LEDs are located
on the front panel of the module: one indicates the worst‐case status for all application modules, and the other two indicate the status of the power supplies. The front panel Ethernet port allows the GX2‐CM100B to locally control and monitor all modules through a Web browser‐style interface on a PC, while the rear Ethernet port can be used for SNMP communications within a network management system.
Although the application modules can operate without it, the GX2‐CM100B is necessary to setup and monitor modules through either the display option on the shelf door or the Web browser‐style interface. The control module also enables some of the advanced OmniStar GX2 features such as Quick‐Swap Module Configuration and downloadable firmware.
Ask us about the complete Access Technologies Solutions portfolio:
Fiber‐Deep
DOCSIS® 3.1
Node Segmentation
Headend Optics‐GX2
RFoG
FTTx
OmniStar®GX2‐CM100B Control Module
SPECIFICATIONS Communications Interface
Local Ethernet Port (front panel)
Data Format
SNMP
Data Rate
10 Mbit/s (10BaseT Ethernet)
Connector
RJ‐45
Network Management Port (rear panel)
Data Format
SNMP
Data Rate
10 Mbit/s (10BaseT Ethernet)
Connector
RJ‐45
Shelf Display Unit Connector
Mini‐DIN
Alarm Relay
Contact Closure, 250mA/40 Vac or Vdc Max
General
Power Consumption
5 Watts, Max.
Operating Temperature Range
‐20° C to +65° C (‐4° F to 149° F)
Storage Temperature Range
‐40° C to 80° C (‐40° F to 176° F)
Dimensions
1" W x 5.9" H x 15" D (2.5 cm x 15 cm x 38 cm)
Weight
2.0 lbs. (1 kg)
Mounting
GX2‐HSG* Equipment Shelf
Ordering Information Model Name
Description
GX2‐CM100B
Control Module
RELATED PRODUCTS
GX2 Chassis
Optical Patch Cords
Power Supplies
Optical Passives
GX2 Transmitters
Installation Services
Note: Specifications are subject to change without notice.
Customer Care
Copyright Statement: ©ARRIS Enterprises, Inc. 2015 All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, Contact Customer Care for product information and sales:
• United States: 866‐36‐ARRIS
• International: +1‐678‐473‐5656
transformation, or adaptation) without written permission from ARRIS Enterprises, Inc. (“ARRIS”). ARRIS reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of ARRIS to provide notification of such revision or change. ARRIS and the ARRIS logo are all trademarks of ARRIS Enterprises, Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and the names of their products. ARRIS disclaims proprietary interest in the marks and names of others. The capabilities, system requirements and/or compatibility with third‐party products described herein are subject to change without notice.
(rev 03-2015)
GX2‐CM100B_DS_17MAR15
Ask us about the complete Access Technologies Solutions portfolio:
Fiber‐Deep
DOCSIS® 3.1
Node Segmentation
Headend Optics‐GX2
RFoG
FTTx