Spec Sheet - Joel Berman Glass Studios

Strata
Kiln Cast Classic
· Organic design inspired by
an abstraction of sedimentary rock.
The mold has 3 visually distinct
horizontal sections:
bottom has 30" of striated lines;
middle section is 48" of Pietra; top
is 30" of Atlantis
max. panel size
· 53" wide x 108" high
thicknesses
·
·
·
·
·
1/4" (6 mm) 3.27 lb/sq ft
3/8" (10 mm) 4.90 lb/sq ft
1/2" (12 mm) 6.64 lb/sq ft
5/8" (15 mm) 8.17 lb/sq ft
3/4" (19 mm) 9.81 lb/sq ft
natural color
· Clear glass
· Low iron glass (virtually eliminates
the green inherent in
standard clear float glass)
panel finish
options
· All stock and custom colors
(transparent, frosted, opaque or
sfumato)
· Sandblast (10–100% frosted)
· Transition - note: maximum panel
width: 46" (1168 mm)
This diagram is a representation only. Please refer to our website or contact JBGS for additional
information. All drawings and materials appearing herein constitute original and unpublished work
of Joel Berman Glass Studios and may not be duplicated without prior consent of JBGS.
jbermanglass.com | info@jbermanglass.com
safety treatment
· Temper
· Temper and laminate
design options
·
·
·
·
·
·
·
Curve - Bend
Shape - Cut
Drill
Notch
Slump
Carve
Carve and Clarify
edge finish options · Kiln polish (unless otherwise
specified)
· Flat machine polish
· Arriss
hardware options
108” (2743 mm)
pattern
· Point Support Mounting
· Combination of floor, ceiling and
wall mount
For· details, go to
www.jbermanglass.com/hardware
53”(1346 mm)
© 2015 Joel Berman Glass Studios All rights reserved. JBGS15-01