2015-2016 Full Catalog - Advancing Alternatives

Transcription

ADVANCING
ALTERNATIVES
2015 Product Catalog
ADVANCING
ALTERNATIVES
Toll Free: 877-546-2257
Fax: 717-824-4053
E-mail: sales@advancingalternatives.com
http://www.advancingalternatives.com
At Advancing Alternatives, we’ve been serving the greenhouse and
dairy industries since 1997. Greenhouse growers and farmers have
long been benefitting from the natural (passive) ventilation that
our systems and products provide. Our Roll Lock curtain systems
and associated products complement any Horticultural/Agricultural
structure, whether it is a straight or curved profile. We provide systems
that are manual or motorized and automated. As the needs of growers
and farmers have grown and changed, so have we. Today, as always,
our offerings are being developed and expanded in order to be
exceedingly responsive to our valued customers.
Product Index
Curtain System Pkgs p 4-7
Free Standing, Gutter Connect
and Curtain Wall
110v Motors and Controllers
p 14- 15
Tube Motors, Gear Box Motors, VCUs
Flare Tube Products & Gable
End Frames p 24
Flare Tube & Gable End Frames
Climate Controls and
Accessories p 9-11
Conventional and Solar
Manual Operators &
Accessories p 16-19
Gear Cranks and Adapters
Related Products p 25-30
Fasteners, Fabrics, S-Hooks,
Sod Staples & Row Cover Hoops
Low Voltage Motors
p 12
24v DC Low Voltage Motors
Extrusions
p 22-23
WireLock, ZigZag Wire, H-Channel,
hcap, Roll-Bars and Roll-Bar Cap
Dairy Products p 31-39
Divider Curtains, Dairy Ventilation
Systems, Winches, Pulleys & Cable
Advancing Alternatives
The “nature” of greenhouse growing
Natural Ventilation
Advancing Alternatives greenhouse curtain/ventilation systems
allow for air movement across the width of your greenhouse.
The natural ventilation provided by our curtain systems serve
four crucial horticultural functions: temperature control, air
circulation, humidity control, and CO2/oxygen replacement.
Environmental Control is Quality Control
Greenhouses accept and trap solar radiation thereby raising
the temperature in the environment. High temperatures can be
detrimental to plant growth and/or plant health. Our natural
ventilation systems provide a means to exhaust excess heat
in your greenhouse. Plants benefit from breezes in terms
of transpiration, and cell wall strengthening. Air moving and
blending throughout a greenhouse balances temperatures,
humidity, CO2, and oxygen, thus creating uniform conditions.
Plants respond better to environmental consistency. Also,
humidity will build up in a greenhouse without adequate
ventilation. The transpiration of plants naturally increases
humidity levels as does the inherent condensation occurring
within a thermally dynamic structure. High humidity levels in a
greenhouse invite pathogens, molds and fungi that can interfere
with plant growth. Humidity control can even be automated with
a curtain/ventilation system from Advancing Alternatives. Lastly,
fresh air provides the CO2 that is critical for photosynthesis
and oxygen required for root growth. So, the introduction of
fresh (and exhausting of stale) air achieved by a well ventilated
greenhouse increases the health and quality of your greenhouse
crop.
How is it done?
Opening a space along nearly the entire length is, naturally, the
most energy-efficient way to introduce fresh air to a greenhouse.
A curtain/ventilation system, allows for air movement across
the width of your greenhouse. As the width is the shortest
dimension, that new air will heat up less than air moving
along the entire length of a greenhouse (as is common with
mechanical systems). Sidewall ventilation is also vital to the
efficiency of roof vent systems. And when the operation is
managed by one our vent controllers, a level of crop quality
control is built into your greenhouse without lifting a finger.
Value
When utilizing materials like woven, single or double layer
polyethylene films lowers the materials cost of your greenhouse
sidewalls, it subsequently lowers your cost for ventilation.
Moreover, our inflatable roll up curtains provide an insulation
factor that rivals materials that cost 10 times as much…and that
don’t easily lend to a full sidewall opening.
Packages for
FREE STANDING Greenhouses
»For 6 or more curtain packages, deduct 6%
***All curtain packages must be ordered in 4’ increments
Ventilation Curtain Packages using Side-Clasp Roll-Bar
All Side-Clasp Packages use our One-Piece Roll-Bar with integrated WireLock Channel
Side-Clasp Package includes End Panel WireLock & installation aids.
Under 96’ LF
96’ + LF
PFS-BDWxSC
Roll-Bar, top double WireLock & rope system
$10.01
$9.10
PFS-BLxSC
Roll-Bar, Roll-Lock & rope system
$11.33
$10.30
PFS-BDWLxSC
Roll-Bar, Roll-Lock, top double WireLock & rope system
$15.07
$13.70
Free Standing Greenhouse Curtain Systems
Item Code
Free Standing packages include:
1/4” wind rope, top and bottom hooks for
“V-patterned” Wind Control
Ventilation Curtain Packages using EconoLine Roll-Bar
All Econoline Packages use our Roll-Bar Cap with a 1.315” swedged pipe roll-bar
Item Code
Econoline Package includes End Panel WireLock & installation aids.
Under 96’ LF
96’ + LF
PFS-BDWx1.3
1.3” Roll-Bar, top double WireLock & rope system
$9.46
$8.60
PFS-BLx1.3
1.3” Roll-Bar, Roll-Lock & rope system
$10.67
$9.70
PFS-BDWLx1.3
1.3” Roll-Bar, Roll-Lock, top double WireLock & rope system
$14.52
$13.20
CURTAIN PACKAGES ON PAGES 4, 5, and 6 -- DO NOT INCLUDE OPERATORS OR POLY.
For Operator Package pricing see pages 12, 14, 15, 16, 17 and 18
4
Packages for
GUTTER-CONNECT Greenhouses
Ventilation Curtain Packages using Side-Clasp Roll-Bar
Item Code
Side-Clasp Package includes End Panel WireLock & installation aids.
Under 96’ LF
96’ + LF
PGC-BWxSC
Roll-Bar, top single WireLock & rope system
$8.69
$7.90
PGC-BLxSC
Roll-Bar & Roll-Lock, rope system
$11.77
$10.70
PGC-BWLxSC
Roll-Bar, Roll-Lock, top single WireLock & rope system
$13.42
$12.20
Gutter Connect packages include:
Gutter-Connect Greenhouse Curtain Systems
1/4” wind rope, top and bottom hooks for
“X-patterned” Wind Control
Ventilation Curtain Packages using EconoLine Roll-Bar
All Econoline Packages use our Roll-Bar Cap with a 1.315” swedged pipe roll-bar
Item Code
Econoline Package includes End Panel WireLock & installation aids.
Under 96’ LF
96’ + LF
PGC-BWx1.3
1.3” Roll-Bar, top single WireLock & rope system
$8.14
$7.40
PGC-BLx1.3
1.3” Roll-Bar, Roll-Lock, and rope system
$11.11
$10.10
PGC-BWLx1.3
1.3” Roll-Bar, Roll-Lock, top single WireLock & rope system
$12.87
$11.70
We can help you determine the curtain system to best fit your operation and budget.
Visit the “downloads page”of www.advancingalternatives.com to download a Quote Form.
5
Packages for
CURTAIN WALLS
»For 6 or more curtain systems, deduct 6%
»For 24 or more curtain systems, deduct 11%
Full Access Curtain Packages using Side-Clasp Roll-Bar
Item Code
Description
Under 96’ LF
96’ + LF
PCW-BBTxSC
Double Roll-Bars & chain threshold
$10.67
$9.70
PCW-BBWxSC
Double Roll-Bars & WireLock (Double WireLock available)
$10.78
$9.80
PCW-BBWTxSC
Double Roll-Bars, top WireLock & chain threshold
$12.87
$11.70
Curtain Wall Curtain Systems
For Operator Package pricing see pages 12, 14,
15, 16, 17, and 18 For Wind Control options, see
page 7
Full Access Curtain Systems using EconoLine Roll-Bar
All Econoline System Packages use our Roll-Bar Cap with a 1.315” swedged pipe roll-bar
Item Code
Description
Under 96’ LF
96’ + LF
PCW-BBTx1.3
Double Roll-Bars & chain threshold
$9.57
$8.70
PCW-BBWx1.3
Double Roll-Bars & WireLock (Double WireLock available)
$9.68
$8.80
PCW-BBWTx1.3
Double Roll-Bars, top WireLock & chain threshold
$11.77
$10.70
Create inviting access for your customers—convenient throughways for
materials and product movement---partition sections of your greenhouse for
multiple uses!
Have Questions? Need Recommendations? Would you like a Quote?
Quote Forms can be found on the Downloads page of our website www.advancingalternatives.com
or e-mail us at sales@advancingalternatives.com
6
WIND CONTROL SYSTEMS
Wind Panel Packages
Item Code
Description
1 to 5
WPP8
Package for End Wind Panels up to 8’ tall
$459.00
WPP8CP
Pkg for End Wind Panels up to 8’ tall w/center panel
$699.00
WPP12
$629.00
WPP12CP
$989.00
WPP15
$859.00
WPP15CP
EPP 8Interior
Pkg for Internal Panels up to 8’ tall
$229.00
EPP12Interior
$289.00
EPP15Interior
$389.00
$1219.00
Cover Fabric is not
included in our wind
panel packages.
(pages 28 & 29)
Ask about adding
some to your order, or
supply your own.
Additional Wind Control Components can be found on page 26.
1 to 5
6 to 23
Post Wind Straps - includes bottom & top clamps & Single Strap
$28.00
$26.32
PWSD
Post Wind Straps - includes bottom & top clamps & Double Strap
$36.50
$34.31
SCA6
6” Strapping Clamp Assembly (holds 1 strap)
$8.90
$8.37
SCA8
8” Strapping Clamp Assembly (holds 2 straps)
$9.90
$9.31
RBCC4
4” Roll-Bar Cap Clamp (holds 1 strap)
$1.75
$1.65
Item Code
Description
PWSS
1 to 5
6 to 23
Wind Post Bracket Assembly. Includes top & bottom brackets and 12’ Pipe.
$39.80
$37.41
WP_BB
Wind Post Bottom Bracket. Bottom bracket with 4 mounting holes.
$15.00
$14.10
WP_TB
Wind Post Top Bracket. Includes top bracket with 3 spacing positions.
$12.50
$11.75
Item Code
Description
WP_BA12
Wind Control Systems
Post Wind Straps and Wind Post Assembly
Wind Rope Systems
Description (Sold by lineal feet)
1 to 5
PWR-LW-Eb4Eb8 Package Wind Rope - Light Wgt (LF.)
$0.89
PWR-LW-EzEb8
$0.89
Item Code
Package Wind Rope - Light Wgt (LF.)
PWR-HD-Eb4Eb6 Package Wind Rope - Heavy Duty (LF.)
$1.60
PWR-HD-EzEb6
Package Wind Rope - Heavy Duty (LF.)
$1.60
PWR-LD-HD
Package Wind Rope, Light Weight to Heavy Duty upgrade. (LF.)
$0.89
Posi-Clasp Products produced under US Patent #5,671,795; CAN #2,244,786
and others granted and pending
FlareTube Products produced under US Patent 6,279,288 B1
7
The Benefits of Automation
Reliability...
...should be the cornerstone of an
automated ventilation system. Trusting
your crop’s health to automation requires
a high level of confidence in the system’s
components. Our lightweight, low torque,
low voltage motors, deliver a roll up
operation that means fewer moving parts
under low stress and, therefore; the highest
level of reliability per ventilation asset.
All-in-one:
With our VCU2/24 and VCU4/24
ventilation controller managing your
sidewall ventilation (plus heating and
fans if you like), add a humidity sensor;
and you have easy-to-program quality
control automation in one single box.
Take advantage of the VCU2/24’s
and VCU4/24’s all-in-one designs and
eliminate costly contractor boxes by
plugging into an existing outlet for a
simple, one step process.
Utilize the sun:
Go “off-grid” with your ventilation. Our
solar controllers take advantage of the low
power needs of our LVM vent motors. Our
solar packages combine a solar ventilation
solution for greenhouse growers that are
“going green” and high tunnel growers that
are automating in remote locations. For
your convenience, we have packaged our
Solar Vent Kits with everything you’ll need
to control your ventilation.
8
24V LOW VOLTAGE MOTOR CLIMATE CONTROLLERS
The VCU2/24 System is designed for the unique challenges of
high tunnel greenhouse ventilation control.
Features:
24Volt DC motors are shown on page 12
Natural Ventilation and Climate Controllers
• Control up to 2 curtains and 2 individual dry contact devices
(heaters, fans, etc).
• Adjustable open and close temperature.
• Effective temperature compensation.
• Optional humidity sensor override
• LED digital temp display
• LEDs show status of operations
• Quick & Easy programming
• Manual override to open and close
• Holds program in power outage
• 2 year limited warranty
• 100’ temperature sensor included
VCU2/24
Quick & Easy Settings:
Set ideal temperature points, run time for stages, idle time between stages, temperature differentials, set low temperature
alert point, the heater hysteresis and other great features
The VCU4/24 System allows for independent set points for curtain, roof vents,
and heaters.
Features:
VCU4/24
Item Code
• Control up to 4 curtains or 3 curtains and 2 individual dry contact devices (heaters,
fans, etc).
• Adjustable open and close temperature.
• Effective temperature compensation.
• Optional humidity sensor override
• LED digital temp display
• LEDs show status of operations
• Quick & Easy programming
• Manual override to open and close
• Holds program in power outage
• 2 year limited warranty
• 100’ temperature sensor included
110V AC input Controller with 24V DC output
Description
1 to 5
VCU2/24
Vent Control, for 1 or 2 Low Voltage Motors
$849.00
VCU4/24
Vent Control, for 3 or 4 Low Voltage Motors
$1499.00
We can help you determine the control system to best fit your operation and budget.
Contact us now with your questions. 877-546-2257
9
24V CLIMATE CONTROLLER ACCESSORIES
Item Code
1 to 5
Description
VCU4RS
Rain Sensor. For use with VCU4/24_RS only
$274.90
VCU-Humidty
Humidity sensor for VCU 2/24 or 4/24
$250.00
VCS-100
REPLACEMENT - Vent Control Sensor 100’ Long for all 24v Vent Controls and Solar Vent
Controls
$69.00
24V LOW VOLTAGE MOTOR CONTROLLERS AND SWITCHES
Vent Control Unit - Low Voltage Master
works with our Controller Interface Boxes listed below
Item Code
VCU-LVMaster
1 to 5
Description
Control up to 8 CIB units simultaneously (terminal interconnect box included).
Now customers can use our most popular “easy to program/operate” curtain
controller to run UP TO 16 Low Voltage Motors.
$699.00
Controller Interface Boxes for Low Voltage Motors
Accepts signals from other controllers while safely providing the motors with properly fused 24 volt DC power.
110V AC input, with 24V DC output and terminal points to attach your signal wires
-- for 1 Low Voltage Motor -Item Code
1 to 5
Product Description
Controller Interface Box, 110V AC input 24V DC output, (for 1, 60NM or 100
NM motor).
NM motor).
CIB1/24
CIB1/24wMO
CIB1/24
$349.00
$449.00
CIB2/24w2MO
110V AC input, with 24V DC output and terminal points to attach your signal wires
-- for 2 Low Voltage Motors -Item Code
1 to 5
Product Description
NM motors).
CIB2/24
CIB2/24w2MO Controller Interface Box, 110V AC input 24V DC output, (for 2 motors).
$549.00
$649.00
Switch Relay Transformer Boxes for Low Voltage Motors
110V AC input, with 24V DC output, with manual switches
SRTB2/24
Item Code
SRTB1/24
SRTB1/24-LM
SRTB2/24
10
Description
110V plug-in Transformer Box with DC diode, fuses and relays (for 1, 60NM
or 100 NM motor). Includes 1 Manual Up/Down/Off Switch.
110V plug-in Transformer Box with DC diode, fuses and relays for 1 LARGE
Low Voltage Motor. Includes 1 Manual Up/Down/Off Switch.
110V plug-in Transformer Box with DC diode, fuses and relays for 2 Low
Voltage Motors. Includes 2 Manual Up/Down/Off Switches.
1 to 5
$365.00
$429.00
$579.00
24V SOLAR POWERED CLIMATE CONTROLLERS
If you have no access to conventional electricity, or simply a desire to harness the sun’s rays to naturally ventilate
your greenhouses, Advancing Alternatives can support you with our line of solar controllers.
SOLAR!
Turn the same energy that warms your greenhouse into the energy that cools it! Our solar
powered climate controllers will do just that by managing either 2 or 4 low voltage motors.
Item Code
Description:
1 to 5
SVC4-Solar
Solar Vent Control for 4 Low Votage Motors. System includes: climate controller
with individual manual overrides for 4 Low Voltage motors, solar charge controller
and converter. All are mounted on an aluminum panel to simplify the installation.
100’ temperature sensor included
Item Code
Description:
SVC2-Solar
Solar Vent Control for 2 Low Votage Motors. System includes: climate
controller with individual manual overrides for 2 Low Voltage motors, solar
charge controller and converter. All are mounted on an aluminum panel to
simplify the installation. 100’ temperature sensor included
SOLAR K
IT!
SOLAR
!
1 to 5
$1249.00
Solar Powered Climate Controller Kits
Item Code
SVK2-Solar
SVK4-Solar
1 to 5
Product Description
Solar Vent Kit for 2 LVMs w/ climate controller, charge controller,
solar panel, battery, 60’ of wiring
Solar Vent Kit for 4 LVMs w/ climate controller, charge controller,
solar panel, battery, 60’ of wiring
SOLAR
$2480.00
$2980.00
!
Already have solar? Our easy to use VCU2-Solar will operate with your existing solar
system. Just connect your wires and your battery pack.
Item Code
VCU2-Solar
Description:
Vent Control, for customers with an existing 12V input source.
System includes: automated curtain controller w/ manual overide for 2
Low Voltage motors. All are mounted on an aluminum panel to simplify the
installation. 100’ temperature sensor included No Solar Charge Controller is
1 to 5
$899.00
included with this model.
11
Our solar powered climate controllers include a solar charge controller that is ready
to run as soon as you attach it to a battery and solar panel. Once the components
are connected, the charge controller will regulate the batteries charge level. With the
purchase of a Low Voltage Motor (found on page 12), your curtain will be controlled by
the rays of the sun.
$1749.00
LOW VOLTAGE MOTORS
Energy Efficient yet POWERFUL!!!
Low Voltage Motors provide automated roll-up power for Greenhouse & Dairy Curtains. Single shaft motors are available in 60,
100 & 180 NM. Double shaft motors are available in 100 NM and 150 NM.
Use our 110V AC input - 24 Volt DC Controllers found on page 9, 10, and 11
Item Code
LVM60/24PxSC
6 to 11
$309.80 $291.21
LVM60/24Px1.3 LVM w/wheel set, guidepipe hardware & 1.315” adapter
$295.80 $278.05
LVM60/24
$250.00 $235.00
60 NM - Motor ONLY - 16 mm OD single output shaft
100 NM Single Shaft output,
24V, 4.2A, 100 watt, 3 RPM, 40 rotations
LVM100/24PxSC LVM w/wheel set, guidepipe hardware & SCRB adapter
1 to 5
6 to 11
$399.80
$375.81
$385.80
$362.65
LVM100/24
$320.00
$300.80
Item Code
24v Low Voltage Motors
1 to 5
24V, 3A, 72 watt, 2.7 RPM, 40 rotations
LVM w/wheel set, guidepipe hardware & SCRB adapter
1 to 5
6 to 11
LVM180/24PxSC LVM w/wheel set, guidepipe hardware & SCRB adapter SCRB $599.80 $563.81
Item Code
$585.80 $550.65
LVM180/24
$495.00 $465.30
Additional adapters are available for various roll-bars.
Please call or e-mail sales@advancingalternatives.com for stocked sizes and pricing.
Item Code
LVM100/24P2xSC
100 NM Double Shaft output,
24V, 4.2A, 100 watt, 3 RPM, 40 rotations
1 to 5
6 to 11
$530.80 $498.95
LVM100/24P2x1.3 LVM w/wheel set, guidepipe hardware & 1.315” adapter
$499.80 $469.81
LVM100/24-2
$375.00 $352.50
100 NM - Motor ONLY - 16 mm OD double output shaft
Item Code
Item Code
6 to 11
LVM150/24P2xSC
$850.80 $799.75
LVM150/24P2x1.3
LVM w/wheel set, guidepipe hardware & 1.315” adapter
$822.80 $773.43
LVM150/24_2D
150 NM - Motor ONLY - 20 mm OD double output shaft
$695.00 $653.30
Cable Guide
Item Code
CG
1 to 5
150 NM Double Shaft output,
Cable Guide, to protect motor wires. Sold in 6’ sections, includes mounting clips.
1 to 5
6 to 11
$19.75
$18.57
Limit Switch Assembly for Low Voltage Motors
LSARL-Lvm
REQUIRED for all Roll-Lock Curtain Installations to override Motor’s down Limit Switch at the RollLock. Compensates for poly shrinkage and/or expansion.
LSO
Replacement Limit Switch
1 to 5 6 to 11
$99.90 $93.91
$36.90
$34.69
To select a motor: Refer to motor guide on page 13.
Still confused...have questions? Call us with your needs... We’ll help you determine which motor will do the job.
12
MOTOR GUIDE
To determine what motor will work best for your system follow this simple step on the following Motor Guides.
TOP Chart: Single Bar Roll-Ups BOTTOM Chart: Double Bar Systems
1. In the TOP shaded area, find the height of the curtain opening.
2. Drop down that column until you reach a number that meets or exceeds the linear length of your curtain.
3. Follow row to the Motor Guide section for the NM required to operate curtain.
Single Bar Curtain System - Motor Guide assumes:
• A single bar (bottom mounted drive bar) Roll-Up system
• Use of our 2” SCRB or 1.315” OD swedged roll-pipe with our Roll-Bar Cap
• Curtain material of 2 layers of 4 oz. poly OR 9.5 oz/sq. yard.
SIDE-CLASP (SCRB)
L
E
N
G
T
H
4’
200
280
300
300
5’
180
260
300
300
6’
160
240
300
300
7’
140
220
300
300
ECONOLINE (1.315” OD)
Single Bar Motor Guide
Height of curtain (in feet)
8’
120
200
300
300
Motor
TM2/40
LVM 60/24
TM3/80
LVM100/24
Torque
40 NM
60 NM
80 NM
100 NM
4’
140
220
280
300
5’
120
200
260
300
6’
100
180
240
300
Double Bar Curtain System - Motor Guide assumes:
L
E
N
G
T
H
8’
60
100
125
145
220
9’
55
95
120
140
215
10’
50
90
115
135
210
11’
45
85
110
130
205
12’
40
80
105
125
200
Motor
TM2/40
LVM 60/24
TM3/80
LVM100/24
LVM150/24
Torque
40 NM
60 NM
80 NM
100 NM
150 NM
L
E
N
G
T
H
ECONOLINE (1.315” OD)
Double Bar Motor Guide
8’
60
140
200
260
Double bar systems
require much more
power than above
single bar systems.
• A double bar (mid-height drive bar) Roll-Up system
• Use of our 2” SCRB or 1.315” OD swedged pipe with our Roll-Bar Cap
• Chart rated for single layer 10 oz. curtain material
SIDE-CLASP (SCRB)
7’
80
160
220
280
8’
55
80
100
120
175
9’
50
75
95
115
170
10’
45
70
90
110
165
11’
40
65
85
105
160
12’
35
60
80
100
155
L
E
N
G
T
H
There will be a minimum 20% restocking fee for any returned items.
There could be an additional fee added for repackaging if not returned in resellable (NEW) condition.
13
CONTROLLERS FOR 110V MOTORS
Item Code
1 to 5
6 to 11
$459.00
$431.46
$298.80
$280.87
For use with 110V AC or 220V AC Motors
VCU1RS
Automatic Control for 1 curtain. Programmable with Heater Control.
Includes 75’ sensor
Rain Sensor - Optional. Can only be used with VCU1
VCS30
Vent Control Replacement Sensor, 30’ Length
$39.00
$36.66
VCS75
$59.00
$55.46
VCS150
$89.00
$83.66
VCU1
VCU1
MANUAL SWITCHES FOR 110V MOTORS
110v Tube Motors and Controllers
Item Code
1 to 5
6 to 23
STSPDT3Main
Switch, Toggle, SP, DT, on-off, maintained w/cover
$29.90
$ 28.11
STDPDT3Main
Switch, Toggle, DP, DT, on-off, maintained w/cover
$29.90
$28.11
TUBE MOTORS (110V)
TM2/40
40 NM Tube Motor - 2”, 110V, 2A, 12 RPM, 21 Turns
TM2/40PxSC
Tube Motor package for Side-Clasp Roll-Bar
TM2/40Px1.3
Tube Motor package for 1.315” Roll-Bar
TM3/60 & TM3/100
1 to 5
6 to 11
$799.80
$751.81
TM2/40xSCCO
Tube Motor Only for Side-Clasp Roll Bar
TM2/40x1.3CO
Tube Motor Only for 1.315” Roll-Bar
$679.80
$639.01
Tube Motor packages include: Counterweight, roller guide, & guidepipe mounting hardware.
Order required Guidepipe length (1’ longer than opening) from pg 19.
60 NM Tube Motor - 3”, 110V, 2.8A, 13 RPM, 21 Turns
TM3/60PxSC
TM3/60Px1.3
TM3/60xSCCO
TM3/60x1.3CO
1 to 5
6 to 11
$899.80
$845.81
$789.80
Item Code
TM3/100xSCCO
TM3/100x1.3CO
$959.80
Cable Guide, to protect motor wires. Sold in 6’ sections, includes mounting clips.
Limit Switch Assembly for Tube Motors
1 to 5
6 to 11
$19.75
$18.57
1 to 5 6 to 11
LSARL-Tm
REQUIRED to override Motor’s down Limit Switch at Roll-Lock.
Compensates for poly shrinkage/expansion. (at right)
$99.90
$93.91
LSO
$36.90
$34.69
14
6 to 11
$1024.41
$742.41
**Required for all Roll-Lock Curtain Installations**
1 to 5
$1089.80
Cable Guide
Item Code
CG
100 NM Tube Motor - 3”, 110V, 3.5A, 10 RPM, 21 Turns
TM3/100PxSC
TM3/100Px1.3
$902.21
GEAR BOX MOTORS (110V / 220V)
Item Code
Description
1 to 5
6 to 11
40 NM Gear Box Motor, 110V, 3.3A, 21 turns. GBM40 is also available as stationary mount motor.
GBM40/110P1x1.3
1-sided output for Side Clasp Roll-Bar w/ guidepipe hardware &
adapter
1-sided output for 1.315” Roll Pipe with guidepipe hardware & adapter
GBM40/110
Motor Only w/o wheelguides
GBM40/110P1xSC
$808.80
$760.27
$794.80
$747.11
$699.00
$657.06
GBM50/220P1x1.3
1-sided output for Side Clasp Roll Bar w/ guidepipe hardware &
adapter
1-sided output for 1.315” Roll Pipe with guidepipe hardware & adapter
GBM50/220
Motor Only w/o wheelguides
GBM50/220P1xSC
$808.80
$760.27
$794.80
$747.11
$699.00
$657.06
GBM50/220P2xSC
GBM50/220P2x1.3
2-sided output for Side Clasp Roll Bar w/ GPHO & adapter
2-sided output for 1.315” Roll Pipe with GPHO & adapter
$826.80
$803.80
$777.19
$755.57
Additional adapters are available for various roll-bars. Please call or e-mail sales@
advancingalternatives.com for stocked sizes and pricing.
Item Code
Limit Switch Assembly for Gear Box Motors
1 to 5 6 to 11
LSARL-GBM
REQUIRED to override Motor’s down Limit Switch at Roll-Lock.
Compensates for poly shrinkage/expansion.
$99.90
$93.91
LSO
$36.90
$34.69
110v Gear Box Motors
**Required for all Roll-Lock Curtain Installations**
Prices in catalog are subject to change. For current prices and new products,
please refer to our website:
www.advancingalternatives.com
ACCESSORIES & COMPONENTS
Item Code
Gear Replacements
1 to 5
Gear7:1
Gear, 7:1 - 2-Sided output
$32.80
Gear13:1
$83.00
Gear15:1
$120.00
Gear5:1L
Gear, 5:1 - Left output
$99.00
Gear5:1R
Gear, 5:1 - Right output
$99.00
Gear10:1L
Gear, 10:1 - Left output
$99.00
Gear10:1R
Gear, 10:1 - Right output
$99.00
Gear10:12D
$120.00
GearCW10:12D
Gear, 10:1 Ch. Wheel - 2 dir.
$174.00
GearCW15:12D
Gear, 15:1 Ch. Wheel - 2 dir.
$165.00
ALL Guide Wheel sets shown above
are used with a 1.315” OD guidepipe.
Item Code
Guide Wheel Sets
1 to 5
GG4W1D
Gear Guide Assembly, 4-Wheel, 1 Direction
output, compact
$52.80
GG4W2D
Gear Guide Assembly, 4-Wheel, 2-Direction
output. For Sm. TM’s, GC 13:1 and GBM’s
$57.80
GG4W2D15
Gear Guide Assembly, 4-Wheel, 2-Direction
output for GC15:1
$69.80
GG4W1D-M
Gear Guide Assembly, 4-Wheel, 1-direction
output, for 180 LVM’s & Tube Motors
$64.80
15
MANUAL OPERATORS
GCP5:1B Gear Cranks with internal brake
For lower
curtains...
GCP5:1Bx1.3
Short Crank Handles
reach up to 6’ high
For curtain lengths
up to 120 LF. x 5’ H
(A minimum of a 10”
baseboard required)
Item Code
Handle requires a
clearance of 8”-10”
from ground level
GC5:1B
Gear Crank
1 to 5
6 to 23
GCP5:1BxSC
5:1 pkg for Side-Clasp
$128.80
$121.07
GCP5:1Bx1.3
5:1 pkg for 1.315” Pipe
$116.80
$109.79
GC5:1B
5:1 Gear Crank ONLY
$94.80
$89.11
RBAGC5xSC
Adapter for Side-Clasp
$20.00
$18.80
RBAGC5x1.3
Adapter for 1.315” Pipe
$8.00
$7.52
Manual Operators
1” OD Guidepipes for the GC5:1B are found on page 19.
This gearbox
does not
have a
internal
brake!
GC7:1SH
Gear Crank Package 5:1 uses handle as Gear Crank Package 10:1 uses handle
as a brake. One sided output.
a brake. One sided output.
For curtain lengths up to 240’ L x 5’ H.
1 to 5
6 to 23
GCP10:1xSC
$237.00
$225.00 $211.50
GCP10:1x1.3
$185.00 $173.90
GC10:1
Item Code
GCP5:1xSC
1 to 5 6 to 23
$237.00 $222.78
GCP5:1x1.3
GC5:1
Specify Left or Right upon ordering.
Item Code
Gear Crank Package 7:1 gear ratio w/
Short Handle. One sided output.
$222.78
Item Code
GCP7:1SHxSC
1 to 5
$183.00
6 to 23
$172.02
$225.00
$211.50
GCP7:1SHx1.3
$169.00 $158.86
$185.00
$173.90
GC7:1SH (only)
$131.00
$123.14
Specify Left or Right upon ordering.
GC13:12DSH
GC15:1SH
GC13:1SH
Gear Crank Package 13:1 gear ratio
w/Short Handle. One sided output.
Item Code
GCP13:1SHxSC
w/Short Handle. Two sided output.
w/Short Handle. One sided output. For
curtain lengths up to 300’ L x 5’ H.
1 to 5
6 to 23
$237.00 $222.78
Item Code
GCP13:12DSHxSC
1 to 5
$266.00
6 to 23
$250.04
Item Code
GCP15:1SHxSC
1 to 5 6 to 23
$291.00 $273.54
GCP13:1SHx1.3 $223.00 $209.62
GCP13:12DSHx1.3
$243.00
$228.42
GCP15:1SHx1.3
$277.00 $260.38
$185.00 $173.90
GC13:12DSH (only)
$196.00
$184.24
GC15:1SH (only)
$239.00 $224.66
GC13:1SH (only)
16
MANUAL OPERATORS
For higher
curtains...
Long Handled
Gear Cranks
Available in 3’, 5’ and 8’ for
curtains up to 96’ L x 5’ H
Crank handle
reaches up
to 13’ high
• 7:1 Long-Handled Gear Cranks
include adapter (internal brake)
• Can be used in right or left
direction applications
• Stays attached to Roll-Bar & is
held at the correct height by
securing hande to side wall
• Roll Bar can touch the ground
when using this operator
Item Code
1 to 5
6 to 23
GCLH3x1.3
$125.00
$117.50
GCLH3xSC
$139.00
$130.66
GCLH5x1.3
$150.00
$141.00
GCLH5xSC
$164.00
$154.16
GCLH8x1.3
$175.00
$164.50
GCLH8xSC
$189.00
$177.66
Curtain is still
accessible at
ground level
with Crank
handle.
GC7:1
GC13:1
GC13:12D
w/Crank Handle. One sided output.
For curtains up to 240’ L x 5’ H.
w/Crank Handle. Two sided output.
Item Code
GCP7:1xSC
1 to 5
6 to 23
$162.00 $152.28
Item Code
GCP13:1xSC
1 to 5
$216.00
6 to 23
$203.04
Item Code
GCP13:12DxSC
1 to 5
6 to 23
$245.00 $230.30
GCP7:1x1.3
$148.00 $139.12
GCP13:1x1.3
$202.00
$189.88
GCP13:12Dx1.3
$222.00 $208.68
GC13:1 (only)
$145.00
$136.30
GC13:12D (only)
$156.00 $146.64
$91.00
GC7:1 (only)
$85.54
GC15:1
Item Code
1 to 5
GC30:12D
GC15:12D
6 to 23
1 to 5
6 to 23
$288.00 $270.72
Item Code
GCP30:12DxSC
1 to 5
6 to 23
$458.00 $430.52
GCP15:1xSC
$270.00 $253.80
Item Code
GCP15:12DxSC
GCP15:1x1.3
$256.00 $240.64
GCP15:12Dx1.3
$265.00
$249.10
GCP30:12Dx1.3
$434.00
GC15:1 (only)
$199.00
GC15:12D (only)
$199.00
$187.06
GC30:12D (only)
$349.00 $328.06
$187.06
$407.96
17
Manual Operators
STATIONARY MOUNTED OPERATORS
• Stationary units allow for left, right or 2 sided output.
Choose from adapters located on page 19
• 7:1, 13:1 and 15:1 gears can have their input loop angled,
Manual Operators
NOTE:
Use Chain Wheels
on Roll-Up or
Curtain Wall
Systems
for higher locations
(up to 18’).
facing straight out, or straight down, by pivoting the gear mount
Single sided outputs can be used for left or right output.
Two-sided output extends roll-pipe in both directions.
Item Code
GC7:1-S
GC13:1-S
GC15:1-S
GC10:12DS
GCW10:12DS
GCW15:1-S
1 to 5
$91.00
$145.00
$199.00
$185.00
$270.00
$260.00
6 to 23
$85.54
$136.30
$187.06
$173.90
$253.80
$244.40
Chain Wheel Operator Packages
Chain Wheel Packages include operator, adapter(s), Guidepipe Hardware, chain bracket & 26’ of chain (12’ extension)
GCW5:1B
Two
sided
output
Item Code
1 to 5
6 to 23
GCWP10:12DxSC
$360.00
$338.40
GCWP10:12Dx1.3
$336.00
$315.84
GCW5:1BCA
Item Code
GCW5:1B
1 to 5
5:1 Gear Chain Wheel with 26’
chainloop
$99.90
GCW5:1BxSC
6 to 23
$93.91
Item Code
1 to 5
6 to 23
GCW10:12D only
$270.00
$253.80
GCW15:12D only
$260.00
$244.40
5:1 Gear Chain Wheel with Guide
Wheel Asmbly, 26’ chainloop and
sideclasp adapter.
$169.90
Two
sided
output
$159.71
5:1 Gear Chain Wheel with Guide
GCW5:1Bx1.3 Wheel Asmbly, 26’ chainloop and
1.315” adapter.
$149.90
RBAGC5xSC
RBAGC5x1.3
18
$18.80
Adapter for 1.315” Roll Bar
$8.00
GCW15:12D
1 to 5
6 to 23
GCWP15:12DxSC
$330.00
$310.20
GCWP15:12Dx1.3
$307.00
$288.58
1 to 5
6 to 23
$22.00
$20.68
$4.00
$3.76
$140.91
Adapter for Side-Clasp Roll Bar
$20.00
Item Code
GCW10:12D
$7.52
REPLACEMENT ITEMS for Chain Wheels
Chain 26’
26 LF extra chain loop
Chainbrkt
Extra chain bracket
MANUAL OPERATOR ACCESSORIES
Crank Handles and Drill Cranks
Description
Short Loop Handle
21” Crank Handle
30” Crank Handle Consider the
top of your
48” Crank Handle curtain height
60” Crank Handle to determine
72” Crank Handle the length of
crank needed.
80” Crank Handle
96” Crank Handle
14” Drill Crank
24” Drill Crank
48” Drill Crank
72” Drill Crank
96” Drill Crank
1 to 5
$40.00
Drill Crank $15.00
$19.00
$22.00
$26.00
$30.00
$34.00
$40.00
Short
$20.00
Loop
$24.00
Handle
Crank
$28.00
Handle
$38.00
$46.00
Item Code
GPHO
GP7
GP7A
GP8_9
GP8_9A
GP10
GP10A
GP12
GP12A
GP5x1
GP5Ax1
GP7x1
GP7Ax1
Description
Guide Pipe Hardware ONLY (no pipe)
7’ Guide Pipe ONLY - 1.315” OD
7’ Guide Pipe Assembly - 1.315” OD
8’9” Guide Pipe ONLY - 1.315” OD Maximum length
to ship via UPS
8’9” Guide Pipe Assembly - 1.315” OD
5’ Guide Pipe ONLY - 1” OD for GC5:1B
5’ Guide Pipe Assembly - 1” OD for GC5:1B
7’ Guide Pipe ONLY - 1” OD for GC5:1B
7’ Guide Pipe Assembly - 1” OD for GC5:1B
Flex-Hanging Guide Pipes
Guidepipe Extender Post -
Improves operation of motors & manual
operators on Free Standing Structures
1 to 5 6 to 23
GPEP4
4’ Guidepipe
Extender post.
$14.90 $14.01
1 to 5
$14.00
$20.00
$34.00
$33.00
$47.00
$31.00
$45.00
$36.00
$50.00
$14.00
$28.00
$16.00
$30.00
6 to 23
$37.60
$14.10
$17.86
$20.68
$24.44
$28.20
$31.96
$37.60
$18.80
$22.56
$26.32
$35.72
$43.24
Guidepipes should be 1’ longer
than height of curtain. Over
63” incurs a UPS surcharge.
GPHO
1” and 1.315” Flex-hanging
Guidepipes are shown with
optional hardware assembly.
1.315”
Guide Pipe
Assembly
6 to 23
$13.16
$18.80
$31.96
$31.02
$44.18
$29.14
$42.30
$33.84
$47.00
$13.16
$26.32
1”
$15.04 Guide Pipe
$28.20 Assembly
FACT:
ALL Roll-Up Curtains using NON-Stationary operators need
a Guidepipe! We recommend our flex-hanging Guidepipe.
Guidepipe extenders lessen guidepipe “kick-out” at the
bottom and reduce leverage pressure on the operator.
ADAPTORS for Manual Operators and Gear Box Motors
RBA1212 Adapters are used on all
operators that have a 1/2” x 1/2” hollow
shaft such as the GC7:1, GC13:1, GC15:1,
GBM/40 and GBM/50
Item Code
RBA1212xSC
Adapter Fits:
Side-Clasp Roll-Bar
RBA1212x1.3
1.315” OD Roll-Pipe
RBA58RxSC
Side-Clasp Roll-Bar
$38.00 $35.72
RBA58Rx1.3
1.315” OD Roll-Pipe
$26.00 $24.44
RBA1212DxSC
Side-Clasp Roll-Bar - 2 Directional
RBA1212Dx1.3
1.315” OD Roll-Pipe - 2 Directional
ONLY 1, 2 Sided-Output
Adapter is needed for each unit
ordered.
1 to 5 6 to 23
$38.00 $35.72
$24.00 $22.56
$56.00 $52.64
$33.00
$31.02
19
Manual Operator Accessories
Item Code
SLH
CH21
CH30
CH48
CH60
CH72
CH80
CH96
DC14
DC24
DC48
DC72
DC96
Need something you don’t see?
Call Advancing Alternatives for items that would compliment
your greenhouse project.
Structural Components
Glazing Materials
Heating
Irrigation
Grow lighting
Automation/Climate Control
HAF Fans
Electronic Components
Doors
Benches
Shading
Insect Control
We have access to a wide
range of products not listed
in our catalog.
Call today 877-546-2257
20
Have a custom project?
Advancing Alternatives understands that no two greenhouse projects are the same. We are often asked
to develop custom solutions based on the specific greenhouse needs of our customers. If your project
requires a creative approach, call or email us. We are here to advance your ideas.
Retractable Lighting Mounts and Trusses
Rack and Pinion Drives
Roll-up Climate Zone Partitions
Light Depravation Systems (Blackout)
Custom Controllers
Specially Engineered Systems
Full Length Brush-Sealed Curtains
If you have a problem or a project idea, call us, we would love to help!
Call today 877-546-2257
21
ALUMINUM EXTRUSIONS
Zig Zag Wire and Wire Lock Bases
Item Code
Description
ZZW4
4’ ZigZag Wire
$1.30
ZZW6
6’ ZigZag Wire
$1.95
Double WireLock and End Bow
WireLock bases
both accept 3 layers of wires and
multiple layers of poly.
Aluminum Extrusions
Our ZigZag wire is made from .085” diameter, heavy duty,
stainless steel spring wire, double-tempered
to allow for a better return to original shape.
SAVE $$$ By buying FULL bundles!
1 to 49
Item Code
WL8
WL12
Item Code Description
1 to 14 Bndls
ZZW4x20
4’ ZigZag Wire - Bndl of 20
ZZW4x50
ZZW6x50
$25.60
1 to 5 Bndls
$60.00
1 to 3 Bndls
$90.00
15 to 29
Bndls
$23.60
6 to 11 Bndls
$55.00
4 to 7 Bndls
$82.50
30+ Bndls
$21.60
12+ Bndls
$50.00
8+ Bndls
$75.00
Would you like a Quote? Quote Forms can be found on the
Downloads page of our website www.advancingalternatives.
com or e-mail us at sales@advancingalternatives.com
Description
8’ Single WireLock Base
12’ Single WireLock Base
1 to 19
$7.50
$11.25
20 to 99
$7.05
$10.58
100 to 399
$6.68
$10.02
400 & up
$6.38
$9.57
ALL extrusions less than 8’ can be shipped via UPS.
Item Code
DWL8
DWL12
Description
8’ Double WireLock Base
12’ Double WireLock Base
1 to 23
$18.00
$27.00
24 to 95
$16.92
$25.38
96 to 399
$16.02
$24.03
400 & up
$15.30
$22.95
Polycarbonate Extrusions
• End Bow WireLock is made for poly or polycarbonate end walls
• Aluminum End Bow WireLock is available in 8’ and 12’ lengths.
• Uses #12 (self-drilling) Tek Screws, found on page 21.
Item Code
EBWL8
Description
8’ End Bow Wire-Lock
1 to 19
$11.00
EBWL12
12’ End Bow Wire-Lock
$16.50
20 to 99 100 to 399 400 & up
$10.34
$9.79
$9.35
$15.51
$14.69
$14.03
• Aluminum H-Channel is used for joining 2 pieces of 8mm polycarbonate.
• Aluminum h-cap is used to hold down edge or cover end of 8mm polycarbonate.
Item Code
HC8
HC12
Description
8’ H-Channel
12’ H-Channel
1 to 19
$10.60
$15.90
h-cap
20 to 99 100 to 399
$9.97
$9.44
$14.95
$14.16
400 & up
$9.01
$13.52
hcap8
8’ h-cap
$7.00
$6.58
$6.23
$5.95
hcap12
12’ h-cap
$10.50
$9.87
$9.35
$8.93
and other granted and pending
22
H-Channel
• Flared
edges make
installation &
caulking easier
• Available in 8’ or
12’ lengths
• Uses #12 or #14
Tek Screws
ROLL BAR PRODUCTS, COMPONENTS and AIDS
Posi-Clasp Side-Clasp Roll-Bar
Our 2” OD aluminum Side-Clasp Roll Bar, is our solution to the “all in one” roll bar. This roll-bar
can be used on all Posi-Clasp Single or Double Bar Curtain Systems up to 200LF, including those
that lock-down. The SCRB uses ZigZag Wire (order separately) to clasp one or two layers of curtain
material into the built-in Wirelock groove, allowing it to maintain it’s round shape as the curtain is
rolled up.
Item Code
Description
SCRB8
SCRB12
8’ Side-Clasp Roll Bar
12’ Side-Clasp Roll Bar
1 to 23
24 to 95
96 +
400 & up
$24.00
$36.00
$22.56
$33.84
$21.36
$32.04
$20.40
$30.60
Econoline Roll-Bar and Components
•
•
•
•
ERB Package comes with Roll-Pipe, Roll-Bar Cap and Stainless Steel Teks
Galvanized Roll-Pipe is 1.315” OD, 16 gauge swedged pipe
Aluminum Roll Bar Cap is pre-drilled in 8’ and 12’ lengths
Use #12x.75 (self-drilling) Tek Screws, on page 21 to attach Roll Bar Cap to rollpipe
Lower cost option
for curtains.
Description
1 to 23
24 to 95
96 to 399
400 & up
ERB8
8’ Econoline Roll-Bar w/pipe, cap & teks
$21.90
$20.59
$19.50
$18.62
ERB12
$30.95
$29.10
$27.55
$26.31
RP8x1.3
8’ Roll-Pipe, 16 ga. swaged 1.315” OD
$10.30
$9.69
$9.17
$8.76
RP12x1.3
12’ Roll-Pipe, 16 ga. swaged 1.315” OD
$13.95
$13.12
$12.42
$11.86
RBC8
8’ Roll-Bar Cap, aluminum, pre-drilled
$9.20
$8.65
$8.19
$7.82
RBC12
$13.80
$12.98
$12.29
$11.73
ERBS 8
8’ Econoline Roll-Bar (sm) w/1” pipe, cap & teks
$19.71
$18.53
$17.55
$16.76
ERBS12
RBCS8
RBCS12
12’ Econoline Roll-Bar (sm) w/1” pipe, cap & teks
8’ Roll-Bar Cap, sm. alum, pre-drilled
$27.86
$7.50
$11.25
$26.19
$7.05
$10.58
$24.80
$6.68
$10.02
$23.68
$6.38
$9.57
Posi-Clasp Roll-Lock
The Posi-Clasp Roll-Lock extrusion, creates a fully
sealed covering at the bottom of the roll-up sides.
This eliminates air seepage and heat loss. Locking
down helps to lessen wind flap and extends poly life.
Item Code
Description
RL8
RL12
8’ Posi-Clasp Roll-Lock
12’ Posi-Clasp Roll-Lock
1 to 23
24 to 95
96 to 399
400 & up
$32.00
$48.00
$30.08
$45.12
$28.48
$42.72
$27.20
$40.80
Posi-Clasp Installation Aids
Item Code
Description
SCHRLS9
Side Clasp Hangers for Roll-Lock, set of 9
$39.90
SCH2xS9
Side Clasp Hangers, for 2x baseboard, set of 9
$17.50
SCHJS9
Side Clasp Hangers for “J” misc. attachment, set of 9
$17.50
RPHRLS9
Roll Pipe Hangers for Roll-Lock, set of 9
$39.90
RPH2xS9
Roll Pipe Hangers for 2x baseboard, set of 9
$17.50
RPHJS9
Roll Pipe Hangers for “J” misc. attachment, set of 9
Roll Bar Baseboard Deflector, set of 9 (does 96’)
(guides Roll-Bar out over edge of baseboard)
$17.50
RBBDS9
Cost/Set
Roll-Bar & Hangers
make installation quicker,
easier & more uniform
$17.50
All hanger sets support 48LF of Roll-Bar or Roll-Pipe during installation.
Hangers can be moved along Greenhouse as installation progresses.
23
Roll-Bar Products, Components and Aids
Item Code
FLARE TUBE
Why you should use FlareTube:
•
•
•
•
Durable 1-1/2” x 1-3/4” rectangular tube shape with 1/8” thick tube walls made of
special aluminum alloy! Won’t rust, crack, warp or peel.
Flares connect at any angle to another tube, existing structural members or surfaces
with self/drilling Teks. NO need for costly welders and/or specialized brackets!
Available in 8’, 10’, 12’, 14’ & 16’. Easily cuts to any length to construct on site.
Multiple in greenhouses and other structures.
Order can be mixed & matched
Flare Tube Products and Gable End Frame Packages
FlareTube Extrusions
How to make
a 2-Flare
connection
Item Code
Description
8-287 LF
288+ LF
1200+ LF
FT8
8’ FlareTube
$26.00
$24.44
$23.14
FT10
10’ FlareTube
$32.50
$30.55
$28.93
FT12
12’ FlareTube
$39.00
$36.66
$34.71
FT14
14’ FlareTube
$45.50
$42.77
$40.50
FT16
16’ FlareTube
$52.00
$48.88
$46.28
FTA8
8’ Flare Tube Angle
$12.00
$11.28
$10.68
FTA12
12’ Flare Tube Angle
$18.00
$16.92
$16.02
One time purchase required - used to bend FlareTube
Cut to Length
FT2
Flare Tool-Double Headed
FlareTube Products produced under US Patent
6,279,288 B1 and others granted and pending.
$49.90 Each
Gable End Frame Packages
•
•
Packages are for one gable end frame. Purchase 2 packages to do two end walls.
Poly Attachment packages use our Wirelock Base Extrusion and ZigZag Wire
around Roof Bow, door, fan/shutter openings and along base cross piece.
NOTE: Door & Fan/
Flare 1st side
Shutter opening sizes
are easily created on
the job site
Flare 2nd side
For regular Free Standing & Hoop Houses
Check Level
Fasten with Teks
24
Item Code
Description
GEF-FS20
GEF-FS24
GEF-FS28
GEF-FS32
GEF-HH20
GEF-HH24
GEF-HH28
GEF-HH32
Gable End Frame, 16’ - 20’ wide, Free Standing
Gable End Frame, 16’ - 20’ wide, Hoop House
1 to 5
6 to 23
$428.00
$518.00
$658.00
$768.00
$528.00
$638.00
$838.00
$969.00
$402.32
$486.92
$618.52
$721.92
$496.32
$599.72
$787.72
$910.86
Hardware for
cover fabric is not
included in our
gable end frame
packages
Ask about adding
some to your
order.
FASTENERS and HARDWARE
#12 Tek Fasteners Stainless Steel
3/4” or 1” Teks
For attaching extrusions
to metal.
1-1/2” Teks
to wood.
Item Code
Description
FTS12x.75 SS
FTS12x1 SS
FTS12x1.5 SS
FTS12x.75 SSB
FTS12x1 SSB
FTS12x1.5 SSB
Tek Screw 110/pk
Tek Screw 110/pk
Tek Screw 110/pk
Tek Screw 1000 qty
Tek Screw 1000 qty
Tek Screw 1000 qty
#12x3/4”, SS
#12x1”, SS
#12x1.5”, SS
#12x3/4”, SS
#12x1”, SS
#12x1.5”, SS
1 to 5
6 to 23
$21.75
$23.75
$25.75
$130.00
$167.50
$182.50
$20.45
$22.33
$24.21
$122.20
$157.45
$171.55
#14 Tek Fasteners Stainless Steel
Description
FTS14x1 SS
FTS14x1.25 SS
FTS14x1.5 SS
FTS14x2 SS
FTS14x2.5 SS
FTS14x1 SSB
FTS14x1.25 SSB
FTS14x1.5 SSB
FTS14x2 SSB
FTS14x2.5 SSB
Tek Screw 110/pk
Tek Screw 110/pk
Tek Screw 110/pk
Tek Screw 110/pk
Tek Screw 110/pk
Tek Screw 1000 qty
Tek Screw 1000 qty
Tek Screw 1000 qty
Tek Screw 1000 qty
Tek Screw 1000 qty
1 to 5
$32.00
$35.00
$37.75
$43.75
$44.75
$245.00
$265.00
$285.00
$325.00
$339.00
#14x1”, SS
#14x1.25”, SS
#14x1.5”, SS
#14x2”, SS
#14x2.5”, SS
#14x1”, SS
#14x1.25”, SS
#14x1.5”, SS
#14x2”, SS
#14x2.5”, SS
6 to 23
$30.08
$32.90
$35.49
$41.13
$42.07
$230.30
$249.10
$267.90
$305.50
$318.66
•For constructing any
FlareTube projects, we
recommend using #14
Tek Screws ONLY,
because of the longer
drill tip length.
•If extra Tek Screws are
needed for the PosiClasp Roll-Bar, please
order #14x1” Teks.
Fasteners - Wood Grip
Item Code
FWG14x1.75ZPEA
FWG14x1.75ZP65
FWG14x1.75ZPB
FWG12x1.5SS
FWG12x1.5SSB
Description
Wood Grip Screw, #14 x 1.75” Hex Washer Head, ZP,
Wood Grip Screw, #12 x 1.5” Hex Washer Head, SS,
Wood Grip Screw, #12 x 1.5” Hex Washer Head, SS,
SOLD EACH
pack/65
per/1000
pack/110
per/1000
1 to 5 6 to 23
$ 0.50
$ 0.47
$19.75
$18.57
$165.00 $155.10
$27.50 $25.85
$145.00 $136.30
U-Clamps
Item Code
UClamp2x2.36
UClamp2x1.9
UClamp2x1.6
UClamp2x1.3
UClamp2x1
Item Code
UClamp2x2.36B200
UClamp2x1.9B275
UClamp2x1.6B400
UClamp2x1.3B700
UClamp2x1B700
Description (sold by Each piece)
U-Clamp, 2 hole for 2.36” OD pipe, galvanized steel
Description (sold by Full box)
U-Clamp, 2 hole for 2.36” OD pipe, galvanized steel, 200 pc box
1 to 24
$0.57
$0.41
$0.30
$0.21
$0.17
1 to 5
$63.00
$63.25
$67.00
$88.00
$52.00
25 to 74
$0.54
$0.39
$0.29
$0.20
$0.16
6 to 23
$59.22
$59.46
$62.98
$82.72
$48.88
There could be an additional fee added for repackaging if not received back in resellable (NEW) condition.
25
Fasteners, Hardware and Associated Products
Item Code
WIND CONTROL COMPONENTS
Wind Control Products
Miscellaneous Components for Wind Control
Item Code
Description
1 to 11
12 to 23
WR1/4”125
Wind Rope Polyester 1/4”, 125’ continuous braid
$16.90
$15.89
WR1/4”250
$28.90
$27.17
WR1/4”500
$47.90
$45.03
WR1/4”1000
$82.90
$77.93
Item Code
Description
1 to 24
25 to 74
EZSnap
EZ Snap Rope Hook - 1” aluminum - sold EACH
$1.32
$1.25
1 to 5
6 to 24
EZSnap25
EZ Snap Rope Hook - 1” aluminum - pack of 25
$24.75
$23.27
EZSnap500
EZ Snap Rope Hook - 1” aluminum - box of 500
$445.00
$418.30
Item Code
Description
1 to 24
25 to 74
EB2
Eye Bolt 2” x 1/4” with 2 each nuts & washers
$0.49
$0.47
EB4
$0.76
$0.72
EB4O
Eye Bolt 4” x 5/16”- opened - with 2 each nuts & washers
$1.30
$1.23
EB6
$1.65
$1.56
EB6O
Eye Bolt 6” x 3/8” - opened - with 2 each nuts & washers
$1.95
$1.84
EB8
$2.10
$1.98
ES6
Eye Screw 6” x 3/8”
$1.78
$1.68
ES8
Eye Screw 8” x 3/8”
$1.98
$1.87
1 to 5
6 to 23
Webbing and Vinyl
Per LF
Item Code
Description
WPP2W1100
Webbing, Polypropylene 2-1/4” white, 1100’ Roll
(2000# test)
$0.45 $389.90 $366.51
WPP2B300
Webbing, Polypropylene 1.75” black, 300’ Roll
(180# test)
$0.17
$14.49
$13.63
N/A
N/A
ALSO SEE WP2W300 AND WP2G300 listed on page 33
VS6
Vinyl Strip 6” wide x 60 mil thick, per LF
(included & shown with Wind Panels on page 4)
VS6R
Vinyl Strip 6” wide x 60 mil thick, per 300’ Roll
(included & shown with Wind Panels on page 4)
$1.50
N/A
$396.00 $372.24
26
ADDITIONAL WIRE PRODUCTS
6” to 60” SHooks available!
“S” Hooks - Extension Hangers (6” to 60” lengths available)
Not all wire that
looks the same...
is the same!
Call for your 6” or
12” sample and
do your own tests.
TEST the strength of our Hooks.
We Mix & Match S-Hooks
to give you added savings.
The more you order...the more you save!
Holds up to 35 pounds!!!
Made from galvanized 10 gauge heavy steel wire.
To figure the cost per box:
Use the column of the TOTAL number of
boxes you plan to order.
Packed 100 per box
1 to 5
Boxes
Item Code Description
6 to 11 12 to 24 25 to 49 50 to 99
Boxes
Boxes
Boxes
Boxes
6” S-Hooks (100 hooks per box)
$30.00
$25.00
$22.00
$20.00
$18.00
SH12B
$34.00
$29.00
$26.00
$24.00
$22.00
SH15B
$36.00
$31.00
$28.00
$26.00
$24.00
SH18B
$38.00
$33.00
$30.00
$28.00
$26.00
SH24B
$42.00
$37.00
$34.00
$32.00
$30.00
SH30B
$46.00
$41.00
$38.00
$36.00
$34.00
SH36B
$50.00
$45.00
$42.00
$40.00
$38.00
SH42B
$54.00
$49.00
$46.00
$44.00
$42.00
SH48B
$58.00
$53.00
$50.00
$48.00
$46.00
SH54B
$62.00
$57.00
$54.00
$52.00
$50.00
SH60B
$66.00
$61.00
$58.00
$56.00
$54.00
Hooks will fit over any 1.315” purlin pipe -- top hook can stretch to fit 1.66” pipe.
Sod Staples - Erosion Control Netting Staples
Our Sod Staples - Erosion Control Netting Staple
CANNOT be Mixed and matched! Order by individual quantity & price break.
Sod Staple prices cannot be guaranteed. We recommend calling or visiting our website for current pricing.
Item Code
1-5 boxes
Description
6-24 boxes 25-49 boxes
SS6x1x6x11 Sod Staples (Erosion Control Pins), 6” Long, 11 gauge, 1000/box
$56.50
$51.50
$47.50
SS8x1x8x11 Sod Staples (Erosion Control Pins), 8” Long, 11 gauge, 1000/box
$71.30
$66.30
$62.30
SS6x1x6x8
Sod Staples (Erosion Control Pins), 6” Long, 8 gauge, 500/box
$54.20
$49.20
$45.20
SS8x1x8x8
Sod Staples (Erosion Control Pins), 8” Long, 8 gauge, 500/box
$63.00
$58.00
$54.00
Row Cover Hoops and Wire
1 to 5
boxes
6 to 24
boxes
Row Cover Hoop Wire, Straight 100 per
pack, .120” Dia. Galv. Spring Wire
$49.90
$44.90
RCHPB64HD
Row Cover Hoop, Pre-Bent 64”, 100 per
$78.80
$73.80
RCHPB76HD
Row Cover Hoop, Pre-Bent 76”, 100 per
$88.80
$83.80
Item Code
Description
RCHW64
27
Additional Wire Products
SH6B
CURTAIN FABRICS
Below are our most popular fabrics...however, we have many fabrics available to us.
Please ask if you have special needs or different fabric weight requirements. All fabric is priced and sold per LF.
IN STOCK ITEM!
For Faster Shipping!
Solarside Woven Poly
IN STOCK ITEM!
For Faster Shipping!
4.1 oz.
Item Code
Ht.
FRSS6
6’
FRSS8
8’
FRSS13
13’
• 4.1 oz, 9 mil, 10 x 10 weave
• Lightweight and extremely strong
24’-99’ 100’-199’ 200’-599’ 600’-1499’
• Diffuses light evenly
$1.85
$1.74
$1.65
$1.58
throughout the structure
• UV Stabilized, Light transmission 80%
$2.25
$2.12
$2.01
$1.92 • Heat-seal two layers of Solarside at
ends to use on roll-ups that need to be
$3.59
$3.38
$3.20
$3.06
inflated
Frosted Vinyls
Curtain Fabrics
9.5 oz.
Item Code
Ht.
24’-99’
100’-199’
200’+
FRFV9.5oz5
5’
$3.00
$2.82
$2.67
• For use where durability of
product is the primary need
with excellent flexibility and
quality rolling action
FRFV9.5oz7
7’
$4.20
$3.95
$3.74
• Semi Transparent
FRFV9.5oz9
9’
$5.40
$5.08
$4.81
• Lots of brightness
FRFV9.5oz11
11’
$6.60
$6.21
$5.88
• 9.5 oz is 10 mil,
with a 9 x 9 weave
5 yr warranty (pro-rated)
Custom Fabric Sizes - larger than 11’ - are available.
• 13 oz is 17 mil,
with a 9 x 9 weave
Please call for a quote.
13 oz.
Item Code
Ht.
24’-99’
100’-199’
200’+
• 18 oz is 20 mil,
with a 10 x 10 weave
FRFV13oz5
5’
$5.00
$4.70
$4.45
• Allow 2 weeks lead time
FRFV13oz7
7’
$7.00
$6.58
$6.23
FRFV13oz9
9’
$9.00
$8.46
$8.01
FRFV13oz11
11’
$11.00
$10.34
$9.79
18 oz.
Item Code
Ht.
24’-99’
100’-199’
200’+
FRFV18oz5
5’
$6.25
$5.88
$5.57
FRFV18oz7
7’
$8.75
$8.23
$7.79
FRFV18oz9
9’
$11.25
$10.58
$10.02
FRFV18oz11
11’
$13.75
$12.93
$12.24
Hems can be top, bottom
FRFV Hem
or intermittent pocket hems
FRFVHem
Sold by LF and requires 4” of fabric
$0.28
28
More About Frosted Vinyls
Frosted Vinyl fabrics diffuse the sun’s rays that
enter a greenhouse. Diffused light determines the
actual amount of photosynthetic light available
for the plants through a light “scattering” within
the greenhouse. This light scattering reduces
shadows in the greenhouse and increases light
to even the lower leaves of a greenhouse plant.
Diffused light, in contrast to direct light, has
been shown to reduce both leaf surface and
soil temperatures. Therefore, even in a warmer
greenhouse, photosynthesis is not impaired. The
quality of light in your greenhouse is one of the
most critical factors in crop quality and yield.
ALL fabric orders are shipped as
non-returnable.
Be sure to check your desired size
before ordering.
13 oz.
KLEER-VU Vinyl
• Customer can see inside of structure, you
will see what is outside
• A HIGH Strength fabric great for any structure
where two-way viewing is needed/required
• Durable Vinyl with embedded 3 x 3 string
weave
Item Code
Ht.
24’-99’
100’-199’
200’+
FRKV13oz54
54”
$3.30
$3.11
$2.94
FRKV13oz107
106”
$5.40
$5.08
$4.81
FRKV13oz160
158”
$7.80
$7.34
$6.95
--
$0.44
$0.42
$0.40
FRKVHem
• UV Stabilized 80% direct light transmission
Allow 2 weeks
for shipping
Custom Fabric Sizes (larger than 11’) are available. Call for a quote.
• Allow 2 weeks for order to ship.
18 oz.
Allow 2 weeks
for shipping
30 oz.
Allow 2 weeks
for shipping
Item Code
Ht.
24’-99’
100’-199’
200’+
Item Code
Ht.
24’-99’
100’-199’
200’+
FRKV18oz54
54”
$3.75
$3.53
$3.34
FRKV30oz54
54”
$4.50
$4.23
$4.01
FRKV18oz106
106”
$6.75
$6.35
$6.01
FRKV30oz106
106”
$8.10
$7.62
$7.21
FRKV18oz158
158”
$9.75
$9.17
$8.68
FRKV30oz158
158”
$11.70
$11.00
$10.42
--
$0.44
$0.42
$0.40
FRKVHem
--
$0.44
$0.42
$0.40
FRKVHem
Black Out Vinyl
Curtain Fabrics
Custom Fabric Sizes - Larger than 11’ are available. Please call or email for a quote.
9 oz.
Item Code
•
•
•
Ht.
24’-99’
100’-199’
200’+
FRBOV 9oz5
5’
$2.75
$2.59
$2.45
FRBOV 9oz7
7’
$3.85
$3.62
$3.43
FRBOV 9oz9
9’
$4.95
$4.66
$4.41
FRBOV 9oz11
11’
$6.05
$5.69
$5.39
9 mil, 9 x 9 weave - 9 oz Black-Out has a soft flexible feel, keeps out light while providing an excellent thickness
One black layer overlaying one white layer
Allow 2 weeks for order to ship.
16 oz.
Item Code
Ht.
24’-99’
100’-199’
200’+
FRBOV16oz5
5’
$8.50
$7.99
$7.57
FRBOV16oz7
7’
$11.20
$10.53
$9.97
FRBOV16oz9
9’
$13.50
$12.69
$12.02
FRBOV16oz11
11’
$15.40
$14.48
$13.71
•
•
•
19 mil, 9 x 10 weave - 16 oz Black-Out has a soft flexible feel, keeps out light while providing an excellent thickness
Both sides are white with a black layer inside
Advancing Alternatives would like to thank all of our customers for their continued support
as we grow and develop our products to work with an ever-changing market.
Please refer to our website at www.advancingalternatives.com
for all of our new and exciting product updates.
29
White Vinyl
•
9.5 oz White allows some light to transmit which brightens an interior
•
18 oz White has a soft flexible feel, keeps out most light while providing an
excellent thickness
•
9.5 oz is 12 mil, 9 x 9 weave
•
18 oz is 20 mil, 9 x 9 weave
•
Curtain Fabrics and Accessories
9.5 oz.
18 oz.
Item Code
Ht.
24’-99’
100’-199’
200’-399’
FRWV9.5oz5
5’
$2.75
$2.59
FRWV9.5oz7
7’
$3.85
FRWV9.5oz9
9’
FRWV9.5oz11
11’
Item Code
Ht.
24’-99’
100’-199’
200’-300’
$2.45
FRWV18oz5
5’
$7.50
$7.05
$6.68
$3.62
$3.43
FRWV18oz7
7’
$9.80
$9.22
$8.73
$4.95
$4.66
$4.41
FRWV18oz9
9’
$11.70
$11.00
$10.42
$6.05
$5.69
$5.39
FRWV18oz11
11’
$13.20
$12.41
$11.75
HAND HELD POLY SEALER
Seal 2 layers of poly together
at curtain ends to allow Roll-Up
sides to inflate. Required for
automatic inflation of
Roll-Up/Lockdown Systems that
use the Roll-Lock extrusion.
Features:
• 115 volt, 25 watt
• 6” sealing length with Teflon
coated jaws
• Lightweight, hand held
• Maintains constant temperature
• Seals P.E., PVC, Cello, Mylar, etc...
• Quick and easy to use
NOTE: Wind & Cold weather will effect
the heat sealing process.
***For best results seal in
temperatures over 40 degrees and
wind less than 5 MPH.
Item Code
PSHH
Price
$124.90
AUTOMATIC INFLATION KITS
Item Code
Description
IFK-Roof
Automatic Inflation Kit, “Thin Style” 120 Volt
includes velcro jumper set. Use to inflate
roofs on greenhouses.
Item Code
Description
IFK-Side
Automatic Inflation Kit, “Thin Style” 120 Volt includes velcro
jumpers and lever switch. Use on roll-up curtains under 1500 sq. ft.
1 to 5
6 to 23
Use IFK_Side
with roll-lock curtains
$119.90 $112.71 •When curtain locks down,
1 to 5
fan switch triggers to inflate
curtain
•Upon opening, switch turns
6 to 23
off and curtain starts to
deflate
$174.90 $164.41
One Fan Kit per curtain.
Item Code
Description
VJP-4Fan
Velcro Jumper Pairs for “Thin Style” Side Fan. Replace when poly is replaced
VJP3
Velcro Jumper Pairs for Side Fan with 3” air transfer hole. Replace when poly is replaced
LSO
Limit Switch only
30
1 to 5
6 to 23
$15.90
$14.95
$9.90
$9.31
$36.90
$34.69
Dairy Products and
Curtain Systems
Climate Controls and
Accessories p 9-11 & 14
VCU’s, CIB’s and SRTB’s
Curtain Fabrics
p 28-30
Winches & Counterweights
p 35
Winches, Pulleys and Cable
Electric Motors
p 12-14
Tube Motors, Low Voltage Motors,
& Gear Box Motors
Dairy Ventilation Curtains
p 32-33
Wind Control
p 5, 26 & 37
Webbing, Hardware, Lashing
Winches
Manual Operators &
Accessories p 16-19
Gear Cranks and Adapters
Divider Curtains
p 34
Manual Operators & Motors
Pipe, Tubing, Bird Net Frames
& Teks p 38-39
Dairy Divider Curtains, Dairy Ventilation Systems and Dairy Components
1
DAIRY VENTILATION CURTAIN PACKAGES
ALL Dairy Curtain Systems require Dairy Wind Rope Packages listed on page 37.
Single Hem Drop Down
Suspension style Dairy Curtain
Drops the curtain from the top to the bottom using a 1.315”
top hem pipe and a pulley system. All systems use stainless
drop pulleys with the following options:
• ZP Eye Screw top hooks or galvanized Hanger Plates
• Stainless Steel or Galvanized cables
Dairy Ventilation Curtain Packages
Double Hem Drop Down
Suspension style Dairy Curtain
Uses top and bottom 1.315” hem pipes on a pulley system
to drop the curtain from top to the bottom. Top pulleys are
stainless steel.
• ZP Eye Screw top hooks or galvanized Hanger Plates
• Stainless Steel or Galvanized cables
Drop-Down style
MUST BE ORDERED SEPARATELY
Wind Control - Pages 7, 26, + 37
Operators - Pages 12 + 14-17.
Fabric - 28 through 30
Dairy curtain packages
must be ordered in increments of 4’
**For all curtains less than 96’...ADD an additional 15%.
Item Code
Curtain System Descriptions
100’ to
499’
500’ to
2400’
Single bar suspension, up to 8’ tall
PDC-DH-ESH8G
Pkg Dairy Curtain, Drop, 1 Hem, zinc plated Eye Screw Hooks at 8’, Galvanized cables
$4.38
$4.12
PDC-DH-PHP8G
Pkg Dairy Curtain, Drop, 1 Hem, galvanized Pulley Hook Plates at 8’, Galvanized cables
$5.14
$4.84
PDC-DH-ESH8SS
Pkg Dairy Curtain, Drop, 1 Hem, zinc plated Eye Screw Hooks at 8’, SS Anti-Twist cables
$6.38
$6.00
PDC-DH-PHP8SS
Pkg Dairy Curtain, Drop, 1 Hem, galvanized Pulley Hook Plates at 8’, SS Anti-Twist cables
$7.08
$6.66
Single bar suspension, up to 11’ tall
PDC-DH-PHP10G
Pkg Dairy Curtain, Drop, 1 Hem, galvanized Pulley Hook Plates at 10’, Galvanized cables
$4.68
$4.40
PDC-DH-PHP10SS
Pkg Dairy Curtain, Drop, 1 Hem, galvanized Pulley Hook Plates at 10’, SSAT cables
$6.68
$6.28
Double bar suspension, up to 8’ tall
PDC-DHH-ESH8G
Pkg Dairy Curtain, Drop, 2 Hem, z.p. Eye Screw Hooks
at 8’, Galvanized 3/16” and 1/8” cbls
$6.36
$5.98
PDC-DHH-PHP8G
Pkg Dairy Curtain, Drop, 2 Hem, galv. Pulley Hook Plates at 8’, Galvanized 3/16” and 1/8” cbls
$7.18
$6.75
PDC-DHH-ESH8SS
Pkg Dairy Curtain, Drop, 2 Hem, z.p. Eye Screw Hooks
at 8’, SS Anti-Twist 3/16” & 1/8” cbls
$8.64
$8.13
PDC-DHH-PHP8SS
Pkg Dairy Curtain, Drop, 2 Hem, galv. Pulley Hook Plates at 8’, SS Anti-Twist 3/16” & 1/8” cbls
$9.24
$8.69
$6.72
$6.32
$8.88
$8.35
Double bar suspension, up to 11’ tall
PDC-DHH-PHP10G
Pkg Dairy Curtain, Drop, 2 Hem, Pulley Hook Plates at 10’, Galvanized
3/16” and 1/8” cbls
PDC-DHH-PHP10SS Pkg Dairy Curtain, Drop, 2 Hem, Pulley Hook Plates at 10’, SS Anti-Twist 3/16” and 1/8” cbls
32
Roll-Up Style Dairy Curtain
Rolls up from the bottom using our 1.315” OD Econoline
Roll-Bar. Roll-Bar climbs the fabric as it turns, creating a
nice, smooth rolled up curtain. For curtains up to 300’.
Suspension Rope Pull Dairy Curtain
Ropes attach to a Main Cable, go over pulleys, then under
a 1.315” OD Roll-Bar. As cable is pulled with a winch (order
separately), ropes roll up the Roll-Bar and curtain.
Eye screw hooks or pulley hook plates are placed 5’ OC.
Roll-Up style
Item Code
100’ to
499’
500’ to
2400’
Roll - Up suspension, up to 8’ tall
PDC-RU-Rx1
Pkg Dairy Curtain, Roll-Up, without Top Clasp.
Uses 1” OD Roll-Bar.
$3.28 $3.09
PDC-RU-Rx1.3
Pkg Dairy Curtain, Roll-Up, without Top Clasp.
Uses 1.315” Roll-Bar.
$3.86 $3.63
PDC-RU-RTCx1
Pkg Dairy Curtain, Roll-Up, with RBC Top Clasp. Uses 1” OD Roll-Bar.
$4.96 $4.67
PDC-RU-RTCx1.3
Pkg Dairy Curtain, Roll-Up, with RBC Top Clasp. Uses 1.315” Roll-Bar.
$5.20 $4.89
PDC-RP-ESH5SS
Pkg Dairy Curtain, Rope-Pull, Eye Screw Hooks at 5’, SS Anti-Twist 3/16” cable
$6.12 $5.76
PDC-RP-PHP5SS
Pkg Dairy Curtain, Rope-Pull, Pulley Hook Plates at 5’, SSAT 3/16” cable
$7.06 $6.64
ALL Dairy Systems require a wind control system (sold separately). Dairy Wind Rope Packages are listed on page 37.
Multi-Direction Dairy Curtains
Suspension style system drops down top hem pipe with
cables using galvanized Pulley Hook Plates.
Bottom hem pipe acts as a roll-bar to roll up curtain for
ventilation for summer storage (eliminates pleating).
Pass-By Dairy Curtains
Designed for tall (12’ to 16’) side walls. Consists of two
curtains where an upper curtain overlaps a lower one to
achieve a totally open wall by completely rolling up for
compact fabric storage. Top curtain is a Multi-Directional
curtain that drops down in front of the Roll-Up lower curtain
during colder times. Both curtains use our Econoline Roll-Bar.
Item Code
Multi-Direction style
100’ to
499’
500’ to
2400’
$8.72
$8.20
Multi - Direction Curtain
PDC-MD-PHP8G/RU
Pkg Dairy Curtain, Multi-Directional System with Drop Top Hem Pipe and pulleys.
Roll-Up bottom pipe. Uses Galvanized cables.
PDC-MD-PHP8SS/RU
Pkg Dairy Curtain, Multi-Directional System with Drop Top Hem Pipe and pulleys.
Roll-Up bottom pipe. Uses Stainless Steel cables.
$11.08 $10.42
Pass By (Double Curtain) Systems
PDC-PB-MD8G/RU
Pkg Dairy Curtain, Pass-By System with Multi-Directional Top Curtain passing by a
$12.84 $12.07
Roll-Up bottom curtain. Uses Galvanized cables.
PDC-PB-MD8SS/RU
Pkg Dairy Curtain, Pass-By System with Multi-Directional Top Curtain passing by a
Roll-Up bottom curtain. Uses Stainless Steel cables.
$14.98 $14.09
33
Dairy Products and Curtain Systems
Rope - Pull suspension, up to 6’ tall
DAIRY DIVIDER CURTAIN PACKAGES
Divider Curtain Motors and Operators
Item Code
Divider Curtain Motors, 110 V, w/ Divider Curtain Mount Bracket
1 to 5
DCTM2/40
40 NM Tube Motor, 12 RPM, (up to 32 LF wide)
$778.90
DCTM3/60
$848.90
DCTM3/100
$998.90
DCTM____
40 NM Divider Curtain Motor - 110V, 13 RPM, 3.3 A, 2-Direction
$799.90
with Manual Override (up to 32 LF curtain)
50 NM Divider Curtain Motor - 220V, 13 RPM, 2.2 A, 2-Direction
DCGBM50/220
$799.90
with Manual Override (up to 42 LF curtain)
DCGBM40/110
DCGC7:12D
DCGC13:12D
7:1 Gear Crank, Divider Curtain Mount & adapter (up to 24’)
$134.00
13:1 Gear Crank, Divider Curtain Mount & adapter (up to 42’)
$188.00
10:1 Gear Chain Wheel w/26’ chain, Divider Curtain Mount &
pipe adapter (up to 42’)
10:12D Gear Chain Wheel w/26’ chain, Divider Curtain Mount
DCGCW10:12D
& 2 pipe adapters (up to 42’)
15:1 Gear Chain Wheel w/26’ chain, Divider Curtain Mount &
DCGCW15:1
pipe adapter (up to 60’)
15:12D Gear Chain Wheel w/26’ chain, Divider Curtain Mount
DCGCW15:12D
& 2 pipe adapters (up to 60’)
Dairy Divider Curtain Packages
DCGCW10:1
DCGC7:1
DCGBM40
DCGC13:1
$306.00
$332.00
DCGCW10:12D
DCGCW15:12D
$294.00
$303.00
Prices in catalog are subject to change. For current prices and new products,
please refer to our website.
www.advancingalternatives.com
Divider Curtain Systems
•
•
•
Our Divider Curtain Systems include all hardware needed for a parlor curtain or overhead divider
door - curtain material not included
2.25” polypropylene lift straps, spaced 5’ OC, provide better winding than either rope or cables
Bearing hangers keep the lift straps aligned as the straps wind up between the hangers
Item Code
Description
DCS12
12’ Divider Curtain System or Door
$236.80
DCS18
18’ Divider Curtain System or Door
$334.80
DCS24
24’ Divider Curtain System
$419.80
DCS30
$514.80
DCS36
$648.80
DCS42
$734.80
DCS48
$824.80
DCS54
DCS60
$928.80
$1032.80
DCSA
Divider Curtain Spool Assembly only (strap not included)
WPP2W
Webbing, Polypropylene, 2-14” white, 2000# test (sold by LF)
WPP2W110
Webbing, Polypropylene, 2-14” white, 2000# test (roll of 1100 LF)
and other granted and pending
34
1 to 5
$52.00
$0.45
$389.90
ALL SYSTEMS
INCLUDE:
• Top curtain clasp
extrusion
• Winder shaft and
hangers
• Spool winders and
hangers on 5’ centers
• Straps & strap clamps
on 5’ centers
• 1.66”, 16 Gauge
bottom hem pipe
WINCH & COUNTERWEIGHT KITS
1 to 5
6 to 23
$63.00
$59.22
Item Code
Description
Winch1900
Winch, 1900# capacity, 2-way ratchet for “free spool” at ctr
Winch2500
Winch, 2500# capacity, 2-speedw/handbrake, 2-way ratchet
$129.00 $121.26
W&CK1900
Winch & Counterweight Kit - 1900# Winch, counterweight & fstnrs
$119.00 $111.86
W&CK2500
Winch & Counterweight Kit - 2500# Winch, counterweight & fstnrs
$189.00
$177.66
WinchBrkt1900
Winch, Bracket, for 1900# winch with fasteners
$11.90
$11.19
WinchBrkt3200
Winch, Bracket, for HD 2500# winch, plus fasteners
$49.90
$46.91
ELECTRIC WINCH
Winch Controllers found on page 16
Item Code
1 to 5
6 to 23
$549.90 $516.91
If you have a problem or a project
idea, we would love to help!
Call today 877-546-2257
Inside or Outside
PULLEY MOUNT KITS
PMKI w/UBC
PMKI
PMKI
PMKIwUBC
PMKO
Individual pulleys found on page 36
PMKO
Pulley Mount Kit, Inside, for Winches -Three 3.5” wall mount pulley’s with lags
Pulley Mount Kit, Inside, for Winches -Two 3.5” wall mount pulley’s & bracket mount
Pulley Mount Kit, Outside, for Winches -Two 3.5” bracket mount pulley’s with lags
$64.90
$64.90
$46.90
$61.01
$61.01
$44.09
1 to 5
6 to 23
$107.25
$100.82
$198.00
$186.12
$256.74
$241.34
$473.98
$445.54
$181.99
$171.07
$335.98
$315.82
$780.00
$733.20
CABLE
(All cable is available by the LF or in 500’, 1000’, 2500’ and 5000’ rolls)
Item Code
Description
C1/8Gx500
Cable, 1/8” diameter, Galvanized Steel, 7 x 19 - 500’
C1/8Gx1000
Cable, 1/8” diameter, Galvanized Steel, 7 x 19 -1000’
C1/8SSx500
Cable, 1/8” diameter, Stainless Steel, 7 x 19 - 500’
C1/8SSx1000
Cable, 1/8” diameter, Stainless Steel, 7 x 19 -1000’
C3/16Gx500
Cable, 3/16” diameter, Galvanized Steel, 7 x 19 - 500’
C3/16Gx1000
Cable, 3/16” diameter, Galvanized Steel, 7 x 19 -1000’
C3/16SSATx500
Cable, 3/16” diameter, SS, 19 x 7 Anti-twist
C3/16SSATx1000 Cable, 3/16” diameter, SS, 19 x 7 Anti-twist
Per LF
-
500’
- 1000’
$0.33
$0.79
$0.56
$2.40
$1440.00 $1353.60
35
Winches, Counterweights, Pulleys and Cable
Description
Low Voltage Electric Winch, 1400# capacity.
LVMWinch1400#
60” cable lift. Limit switch, motor mount and fasteners.
Dairy Wind Control and Suspension Products
SUSPENSION ACCESSORIES
Item Code
Description
1 - 24
25 - 74
75 - 149
P1SNS
Pulley, 7/8”, Single, Nylon Swivel, for roll-up ropes
$0.34
$0.32
$0.31
P15SSS
Pulley, 1.5”, Single, Stainless Steel
$6.75
$6.35
$6.01
P15DSS
Pulley, 1.5”, Double, Stainless Steel
$8.30
$7.81
$7.39
P35SCNB
Pulley, 3.5”, Single, Cast with Needle Bearings
$9.90
$9.31
$8.82
P35SCNB-BM
Pulley, 3.5”, Single, Cast with Needle Bearings, Base Mount
$21.90 $20.59
$19.50
P35SCNB-uBM
Pulley, 3.5”, Single, Cast with Needle Bearings, w/“U” Bolt Mount
$21.90 $20.59
$19.50
PBwUB
Pulley Bracket with “U” Bolt and Nuts
$5.45
$5.13
$4.86
PHPSG
Pulley Hanger Plate for single pulley, Galvanized
$4.95
$4.66
$4.41
PHPDG
Pulley Hanger Plate for double pulley, (wider) Galv.
$5.95
$5.60
$5.30
ESH3.5x5/16
Eye Screw Hook 3.5” x 5/16” (for rope attachment)
$0.32
$0.31
$0.29
ES1.5x3/16
Eye Screw 1.5” x 3/16” (for pulley hangers)
$0.30
$0.29
$0.27
ES2.2x1/4
Eye Screw 2.2” x 1/4”, lag, Zinc Plated
$0.30
$0.29
$0.27
ES4
Eye Screw 4” x 5/16”, lag, Zinc Plated
$0.76
$0.72
$0.68
SMK-ESH
Suspension Mount Kit, with Eye Screw Hooks,
pulley, Hem pipe clamps & 12’ -1/8” Galv. cable
$14.60 $13.73
$13.00
SMK-PHP
Suspension Mount Kit, with Pulley Hook Plate,
pulley, Hem Pipe clamps & 12’ -1/8” Galv. cable
$20.90 $19.65
$18.61
LS3/8x1.75
Lag Screw 3/8” x 1.75”, Zinc Plated
$0.32
$0.31
$0.29
LS3/8x3
Lag Screw 3/8” x 3”, Zinc Plated
$0.53
$0.50
$0.48
Bolt3/8x75CBwH
Bolt 3/8” x .75” Carriage Head, with a 5/32” Hole
to clamp HPC1
$0.78
$0.74
$0.70
HPC1
Hem Pipe Clamp for 1” pipe, Sold EACH,
but 2 pieces are needed per clamp
$0.82
$0.78
$0.73
HPC1.3
Same as above for 1.315” OD Pipe
$0.93
$0.88
$0.83
HPCA1
Hem Pipe Clamp Assembly for 1” pipe, 2 piece,
Galvanized clamp, with 3/8” drilled CB
$3.15
$2.97
$2.81
HPCA1.3
Same as above for 1.315” OD Pipe
$3.25
$3.06
$2.90
CC1/8
Cable Clamp, 1/8”
$0.22
$0.21
$0.20
CC3/16
Cable Clamp, 3/16”
$0.30
$0.29
$0.27
SB
Sill Bracket, Galvanized without hardware
$6.85
$6.44
$6.10
SBwF
Sill Bracket with Fasteners, Galvanized with
2 Lag Screws 3/8” x 1.75”
$7.25
$6.82
$6.46
SBAwAC
Sill Bracket Assembly, Galvanized, w/ Anchor Clip
2 Lag Screws 3/8” x 1.75”
$11.45 $10.77
$10.20
AC
Anchor Clip ONLY (Can be screwed to wood sill)
$1.02
$0.96
$0.91
ACAfWS
Anchor Clip Assembly for Wood Sill
$3.15
$2.97
$2.81
ACAfSB
Anchor Clip Assembly for Sill Bracket
$3.40
$3.20
$3.03
36
WEBBING and WIND CONTROL
Wind Control Products
Required for ALL Dairy Curtain Packages shown on page 32 + 33. Items sold separately.
For additional information on
Post Wind Straps, see page 7
Additional Webbing, Wind Rope, Hooks and EZ Snaps, see page 26.
Per LF
1 to 5
6 to 23
N/A
$20.90
$19.65
LWO
Lashing Winch ONLY
N/A
$10.90
$10.25
LWB
Lashing Winch Bracket
N/A
$2.49
$2.35
LWTSC
Lashing Winch Top Strap Clamp
N/A
$3.90
$3.67
WP2T300
Webbing, Polyester, 2” tan or gray, Roll
of 300’ (5000# test)
$0.29
$49.00
$46.06
WP2W300
Webbing, Polyester, 2” white,
Roll of 300’ (5000# test)
$0.39
$59.00
$55.46
LWA
Dairy Wind Rope Packages
Per LF
if over 100’
Package, Wind Rope with short top hooks and short bottom hooks (2.2” hooks)
$1.05
$0.99
PWR-4xEZSH
Package, Wind Rope with EZ Snap top hooks and short bottom hooks
$1.20
$1.13
PWR-4xSHSB
Package, Wind Rope with short top hooks and bottom Sill Brackets
$3.48
$3.28
PWR-4xEZSB
Package, Wind Rope with EZ Snap top hooks and bottom Sill Brackets
$3.65
$3.44
Item Code
Description
PWR-4xSHSH
PWR-4XEZSH Wind Rope Package is shown for Dairy Curtains.
Features: Two (2) separate ropes in “X” pattern. 4’ hook spacing
with “EZ Snap” hooks placed at the top & short hooks for the bottom.
Sufficient rope for 8’ tall curtain. Order extra rope for taller curtains.
Advancing Alternatives would like to thank all of our customers for their continued support
as we grow and develop our products to work with an ever changing market.
Please keep referring to our website at www.advancingalternatives.com
for all of our new and exciting product updates.
37
Dairy Wind Control Components and Parts
Description
Lashing Winch Assembly, includes
Lashing Winch, brackets and screws
Item Code
ECONOLINE ROLL-BAR and COMPONENTS
Posi-Clasp Econoline Roll-Bar and Components
•
•
•
•
ERB Package comes with Roll-Pipe, Roll-Bar Cap and Stainless Steel Teks
Galvanized Roll-Pipe is 1.315” OD, 16 gauge swedged pipe
Aluminum Roll Bar Cap is pre-drilled in 8’ and 12’ lengths
Use #12x.75 (self-drilling) Tek Screws, on page 39 to attach Roll Bar Cap to swedged pipe
Item Code
Description
1 to 23
24 to 95
96 to 399
400 & up
ERB8
$21.90
$20.59
$19.50
$18.62
ERB12
$30.95
$29.10
$27.55
$26.31
RBC8
$9.20
$8.65
$8.19
$7.82
RBC12
$13.80
$12.98
$12.29
$11.73
The Econoline Roll-Bar (Small) is the same as above but uses a 1” OD Roll-Pipe
Dairy Roll-Bar, Pipe and Fasteners
for Curtains up to 120 LF
ERBS8
$19.71
$18.53
$17.55
$16.76
ERBS12
$27.86
$26.19
$24.80
$23.68
RBCS8
$7.50
$7.05
$6.68
$6.38
RBCS12
$11.25
$10.58
$10.02
$9.57
Swedged Roll and Square Pipe
Item Code
Description
1 to 23
24 to 95
96 to 399
400 & up
RP 8x1.3x16
8’ Roll-Pipe , 16 gauge, swedged, 1.315” OD
$10.30
$9.69
$9.17
$8.76
RP12x1.3x16
12’ Roll-Pipe , 16 gauge, swedged, 1.315” OD
$13.95
$13.12
$12.42
$11.86
RP 8x1.66x16
8’ Roll-Pipe, 16 gauge, swedged, 1.66” OD
$16.00
$15.04
$14.24
$13.60
RP12x1.66x16
12’ Roll-Pipe, 16 gauge, swedged, 1.66” OD
$24.00
$22.56
$21.36
$20.40
ST1.5Sx8x16S
Steel Tube 1.5” Square x 8’ long, galvanized, 16 gauge, swedged
$19.00
$17.86
$16.91
$16.15
ST1.5Sx12x16S
Steel Tube 1.5” Square x 12’ long, galvanized, 16 gauge, swedged
$28.50
$26.79
$25.37
$24.23
FASTENERS
Fasteners - Wood Grip
Item Code
Description
1 to 5
6 to 23
FWG14x1.75ZPEA
Wood Grip Screw, #14 x 1.75” Hex Washer Head, ZP, SOLD EACH
$0.50
$0.47
FWG14x1.75ZP65
Wood Grip Screw, #14 x 1.75” Hex Washer Head, ZP, pack/65
$19.75
$18.57
FWG14x1.75ZPB
Wood Grip Screw, #14 x 1.75” Hex Washer Head, ZP, per/1000
$165.00
$155.10
FWG12x1.5SS
Wood Grip Screw, #12 x 1.5” Hex Washer Head, SS, pack/110
$27.50
$25.85
FWG12x1.5SSB
Wood Grip Screw, #12 x 1.5” Hex Washer Head, SS, per/1000
$145.00 $136.30
38
BIRD NET FRAMES
Lightweight aluminum frames made with our
Patented FlareTube (assemble on site) to
attach to swing-out livestock gates. ALL you do
is stretch your choice of birdnetting over the
frame to reduce the bird populations inside
barn. Entire frame and netting easily swings
open with the livestock gate.
6 to 23
Bird Net Frame Pkg - up to 12’ high x up to 8’ wide
$258.00
$242.52
PBNF12x12
$358.00
$336.52
PBNF12x16
$468.00
$439.92
PBNF16x8
$288.00
$270.72
PBNF16x12
$418.00
$392.92
PBNF16x16
$538.00
$505.72
PBNF12x8W
Bird Net Frame Pkg - up to 12’ high x up to 8’ wide w/wirelock to hold bird netting
$298.00
$280.12
PBNF12x12W
$468.00
$439.92
PBNF12x16W
$618.00
$580.92
PBNF16x8W
$348.00
$327.12
PBNF16x12W
$538.00
$505.72
PBNF16x16W
$688.00
$646.72
Description
PBNF12x8
STAINLESS STEEL TEK FASTENERS
#14 Tek Fasteners
Item Code
Description
FTS14x1SS
FTS14x1.25SS
FTS14x1.5SS
FTS14x2SS
FTS14x2.5SS
FTS14x1SSB
FTS14x1.25SSB
FTS14x1.5SSB
FTS14x2SSB
FTS14x2.5SSB
Tek Screw 110/pk
Tek Screw 110/pk
Tek Screw 110/pk
Tek Screw 110/pk
Tek Screw 110/pk
Tek Screw 1000 qty
Tek Screw 1000 qty
Tek Screw 1000 qty
Tek Screw 1000 qty
Tek Screw 1000 qty
1 to 5
$32.00
$35.00
$37.75
$43.75
$44.75
$245.00
$265.00
$285.00
$325.00
$339.00
#14x1”, SS
#14x1.25”, SS
#14x1.5”, SS
#14x2”, SS
#14x2.5”, SS
#14x1”, SS
#14x1.25”, SS
#14x1.5”, SS
#14x2”, SS
#14x2.5”, SS
#12 Tek Fasteners
3/4” or 1” Teks
to metal.
1-1/2” Teks
to wood.
Item Code
Description
FTS12x.75SS
FTS12x1SS
FTS12x1.5SS
FTS12x.75SSB
FTS12x1SSB
FTS12x1.5SSB
Tek Screw 110/pk
Tek Screw 110/pk
Tek Screw 110/pk
Tek Screw 1000 qty
Tek Screw 1000 qty
Tek Screw 1000 qty
6 to 23
$30.08
$32.90
$35.49
$41.13
$42.07
$230.30
$249.10
$267.90
$305.50
$318.66
#12x3/4”, SS
#12x1”, SS
#12x1.5”, SS
#12x3/4”, SS
#12x1”, SS
#12x1.5”, SS
For constructing any
FlareTube projects,
we recommend using
#14 Tek Screws only,
due to longer drill
tip length.
1 to 5
6 to 23
$21.75
$23.75
$25.75
$130.00
$167.50
$182.50
$20.45
$22.33
$24.21
$122.20
$157.45
$171.55
39
Dairy Bird Net Frames, Roll-Bar and Square Pipe
1 to 5
Item Code
ADVANCING
Prices Effective June 1, 2015
Toll Free: 877-546-2257
Fax:
717-824-4053
E-mail: sales@advancingalternatives.com
ALTERNATIVES
Lancaster, PA 17602
For current prices & new products, see our website at www.advancingalternatives.com
Please note:
Prices are subject to change
Contact Name:
Company Name:
Address:
City:
Item Code
Order Form
State:
Zip
Product Description
Type of Card (check one) □ Visa □ MasterCard □ Discover □ AMEX
# ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Expires: _____ / _____
Security Code (last 3 or 4 digits on back) _______
Name on Card: ______________________________________________________
•
•
•
•
Date:
Phone: (
Fax: (
Email:
Price/Unit
, 20
)
)
x Quantity
Total Cost
Subtotal
PA Sales Tax 6%
TOTAL (less S&H)
Signature
We accept Visa, MasterCard, Discover and AMEX.
Payment Terms for credit accounts - 2%: 10 NET 30
To place orders: Call 877-546-2257; Fax 717-824-4053 E-mail sales@advancingalternatives.com.
Checks are also welcome. ***Deduct 2% for mail-in PRE-PAID orders (check or money order ONLY)
2016 Single Tree Lane
Lancaster, PA 17602

2015-2016 Full Catalog - Advancing Alternatives

Transcription

Similar documents

VISIONWALL Project Profile

ACN 055 514 817 ABN 17 055 514 817 Website: E

Porsche Cars North America Experience Center and

decor 750 Product Brochure

O`hare South Air Traffic Control Tower

DRAWN TOGETHER CURTAIN WORKSHEET ROMAN BLINDS

About The Design School Southern Africa