LED-Floodlight/Plane Surface Floodlight Series 7800... Schuch

NE
W
LED-Floodlight/Plane Surface Floodlight
Series 7800...
Applications:
Car Parks, industrial areas, stockyards,
loading areas, illumination close to buildings, building fronts, object protection
and fence illumination, site and crane
lighting (with vibration absorbing suspension) etc.
Design:
Housing: Die cast aluminium, 2-parts,
powder coated DB702N (iron mica)
Upper part: With LED- and optic-modules
Lower part: With electronic ballast,
glass cover, cable entry with cable relief,
retractable.
Glass: Flat safety glass pane, resistent to
temperature changes, impact resistant
IK08, silicone gasket.
Optic: Lens optic with narrow wide beam
(TB) or asymmetric (A) light distribution.
Wide beam without optics, “Multi-layer”-principle.
Connection: 3-pole terminal, max. clamping range 2,5 mm².
Cable entry: 2 cable entries M25 x 1.5 (1
cable gland and 1 screw plug).
Mounting: Mounting bracket, swivel
range 180°, with 3 drillings for wall- or
ceiling mounting respectively for direct
pole mounting in addition with pipe
clamps ROB 60/76 (see accessories).
Technical Data:
LED: Highpower-LED 4,000K, Ra > 70, life cycle L80 B10 > 50.000h at max. ambient
temperature (see notes).
ECG: 220 - 240V, 50-60Hz. Due to the inrush current of the electronic ballasts, the
maximum permissible number of light fittings per circuit breaker is limited. Overvoltage protection 4kV, excess temperature protection-, overload and short circuit
protection, temperature monitoring of the LED modules.
Ambient temperature: -30°C up to +35°C
7800
7800 TB
7800 A
Options:
– light output reduction (LR) per 230V
control line (standard 50%, dimmable)
– dimmable version 1-10V interface
(DIMA)
– DALI interface for dim light operation
(DIMD)
–u
niform luminous flux option (CL) to
keep the light output on same level for
the whole life cycle
– f or connection to group or central
battery systems (ZB)
– asymmetrical wide light distribution (AB)
Schuch Quality - your advantage:
•modern, extremely low profile housing design made from high-quality corrosion resistant die-cast
aluminium with weather-resistant powder coating
• intransigently energy efficient
• optimal light distribution due to direct luminous LED with highly efficient lens optics
•uniform illumination due to „Multi-Layer“ principle, means each individual LED illuminates the
whole surface, the light curves of each individual LED are overlapping
•no luminous flux decrease during the whole working life time of the LED at versions with uniform
luminous flux function (CL)
•the given information is for rough orientation only, in each individual case a lighting calculation
is necessary
•optimal thermal management due to direct connection of the LED module to the housing, large
cooling surface, excellent heat dissipation
•depending on the optic usable as floodlight or plane surface f loodlight
•safe to operate because of overvoltage, over temperature, overload and short-circuit protection
as well as temperature monitoring of the LED modules
•future orientated by using standardized LED modules
Notes:
Limitations for LED-light fittings: See chapter
„Use of LED lighting in corrosive atmospheres“ in
the Technical Appendix. All technical data is relevant
at the time of print. Actual technical data can be
found in the internet under www.schuch.de.
Subjet to technical changes, misprints and errors.
249a
Catalogue 2014/15
01.06.15
Energy efficiency class
Luminous efficacy [lm/W]
Luminous flux [lm] **
Type
Power/ consumption W **
Article no.
LED
LPH
6-14m
IP66
Substitute for *
Wind­
Wind
angriffsfl.
load area
A = 0,27m²
0,27m2
Weight [ca. kg]
(without packaging)
7800 ...
wide beam
78000 0011
7800 6403
137
15.490
113
A+
HIT 250W
14,5
78000 0012
7800 12803
274
29.570
108
A+
HIT 400W
16,0
narrow wide beam
78000 0001
7800 6403TB
78000 0002
7800 12803TB
137
15.590
114
A+
HIT 250W
14,5
274
30.060
110
A+
HIT 400W
16,0
Wind­
Wind
angriffsfl.
load area
A = 0,05m²
0,05m2
asymmetrical beam (plane surface floodlight optic)
78000 0021
7800 6403A
137
14.780
108
A+
HIT 250W
14,5
78000 0022
7800 12803A
274
28.480
104
A+
HIT 400W
16,0
* The given information is for rough orientation only. In each individual case a lighting calculation is necessary.
**see notes
Accessories / Spare Parts
Subjet to technical changes, misprints and errors.
Article-No.
Artikel-Nr.
Type
78001 9001
7800/01
spare
safety glass
Ersatz-Sicherheitsglas,
Schlagfestigkeit IK08
90270 0005
ROB 60/76
pipe
clamp for direct polezur
mounting
on multiple
Rohrschellenbefestigung
direktenorMastmontage
post
adapters
bzw. top
an Mehrfach-Mastaufsätzen
90117 9000
2537
cable
gland M25 x 1,5 black
Kunststoffverschraubung
M25 x 1,5 schwarz
90118 9000
2538
plug
M25 x 1,5 black
Kunststoffverschlussschraube
M25 x 1,5 schwarz
249b
Catalogue 2014/15
01.06.15