PDF - ArcelorMittal

Sestao price extras list
for Automotive Europe
This price list can be accessed at our website: automotive.arcelormittal.com >
Product offer > Price lists for Europe or requested through our agencies.
Valid as from 01/04/2015 – version 19/03/2015 (EUR/tonne)
1. User guidelines
.2 Structural steels
EN 10025-2:2004
1.1 Price calculation
The following document only lists extras.
The price as invoiced includes:
The basis price
+Transportation extra
+Transportation tax (depending on the country)
+Any extras from the list below
+Warehousing fee
+Specific logistic extras
1.2 Product availability
Not all combinations of specifications are available at each production facility.
2. Extras
2.1 Steel grades
.1 Steels for cold forming and deep drawing applications
EN 10111:2008
ArcelorMittal specific offer
DD11
ArcelorMittal 11
0
DD12
ArcelorMittal 12
10
DD13
ArcelorMittal 13
15
DD14
(*) on request
ArcelorMittal 14
(*)
ArcelorMittal 15
(*)
S235JR
5
S235J0
10
S235J2
20
S275JR
20
S275J0
25
S275J2
35
S355JR
40
S355J0
45
S355J2
50
.3 High Strength Low Alloy steels
EN 10149-2:1995
ArcelorMittal specific offer
S315MC
HSLA 320
40
S355MC
HSLA 360
45
S420MC
HSLA 420
65
S460MC
HSLA 460
75
S500MC
HSLA 500
80
S550MC
HSLA 550
105
S600MC
HSLA 600
120
S650MC
HSLA 650
140
S700MC
HSLA 700
200
.4 Quenchable boron steels
EN 10083-3:2006
ArcelorMittal specific offer
20MnB5
22MnB5
100
.5 Dual Phase steels
prEN 10338:2012
ArcelorMittal specific offer
HDT580X
DP 600
85
DP 780
(*)
(*) on request
>>
The prices listed are in EUR/tonne (excluding taxes) and are subject to the ArcelorMittal Flat Carbon Europe S.A. General Conditions of Sale. This price list applies to the ArcelorMittal offer dedicated to
Automotive applications. It does not apply to the General Industry and Packaging Industry applications. The online English version is the valid version, not the printed version at a certain moment in time.
ArcelorMittal reserves the right to change information of this price list at any time without prior notice.
1/3
.6 High carbon steels
EN 10083-2:2006
2.4 Pickling (with mill edges)
EN 10132-4:2000
ArcelorMittal specific offer
Thickness (mm)
C40E
C40
45
C45E
C45
50
C50E
C50
55
C55
60
C55S
.7 Ferrite Bainite steels
prEN 10338:2012
HDT450F
HDT590F
ArcelorMittal specific offer
1.20
1.39
1.40
1.99
2.00
4.00
800 - 899
On request
43
30
900 - 999
On request
43
30
≥ 1000
On request
43
30
Width (mm)
For tensile strength ≥ 480 MPa
supplementary extra
5
For tensile strength ≥ 700 MPa
supplementary extra
9
FB 450
75
FB 540
90
FB 590
115
2.5 Edge trimming
FB 590 HHE
145
Edge trimmed coils
Thickness (mm)
≤4
2.2 Dimensions
Pickled except high carbon
Extras for thickness / width
10
≤ 6; > 6
Width (mm)
High carbon
40
800
899(1)
900
1099(1)
1100
1499
1500
1549
1.20 - 1.29
(*)
(*)
(*)
(*)
1.30 - 1.39
(*)
(*)
(*)
(*)
S ≤ 0.005%
15
1.40 - 1.49
75
45
40
40
0.005% < S ≤ 0.010%
8
1.50 - 1.79
70
40
35
35
(2) Not applicable for UHSS and VHSS
1.80 - 1.99
58
35
28
28
2.00 - 2.49
58
28
23
23
2.50 - 2.99
45
25
20
20
3.00 - 3.99
48
23
18
18
4.00 - 6.99
41
20
16
16
7.00 - 9.99
43
25
18
18
10.00 - 11.99
-
28
20
20
12.00 - 14.99
-
28
25
25
Thickness (mm)
2.6 Sulphur content(2)
2.7 Improved geometry
Improved flatness in coils for thicknesses 1.20 - 3.00 mm(3)
2/3 EN 10051:2010
(3) On request for thicknesses 3.00 - 4.00 mm
2.8 Coil weight
(*) on request
(1) Prior agreement requested on range 800-985 mm due to the need for a precise
scheduling
The thickness must be either the midpoint of the tolerance range specified in the order, or
the target thickness ordered, whichever value is the lowest.
2.3 Special tolerances according to EN 10051:1997
.1 Tolerances on thicknesses in accordance with the specifications of
the catalogue
3/4 EN 10051:1997
20
Weight (t)
<5
Width (mm)
5
9.999
10
14.999
≥ 15
800 - 1099
(*)
5
0
0
≥ 1100
(*)
5
5
0
(*) on request
>>
0
1/2 EN 10051:1997
5
1/3 EN 10051:1997
15
1/4 EN 10051:1997
25
.2 Tolerances on width
Without edge trimming
With edge trimming
0
apply extras
2.5 Edge trimming
ArcelorMittal Sestao price extras list for Automotive Europe – valid as from 01/04/2015 – version 19/03/2015 (EUR/tonne)
The prices listed are in EUR/tonne (excluding taxes) and are subject to the ArcelorMittal Flat Carbon Europe S.A. General Conditions of Sale. This price list applies to the ArcelorMittal offer dedicated to
Automotive applications. It does not apply to the General Industry and Packaging Industry applications. The online English version is the valid version, not the printed version at a certain moment in time.
ArcelorMittal reserves the right to change information of this price list at any time without prior notice.
2/3
2.9 Order quantities: extras per item
.1 Item definition
An item is defined as a quantity of material specified in one order form for
which the steel grade, dimensions, coating, delivery time and the destination are
the same.
.2 Extras
Tonnage per item (t) (spot business)
5 - 9.999
25
10 - 14.999
15
15 - 19.999
10
≥ 20
0
Note: the weight of the order item should be expressed as a multiple of the
weight of a single coil.
Unit weight / quantities per order unit should be agreed with the factory.
For orders in scheduled business, the minimum monthly tonnage is 20 t.
Extra of 50 EUR/t for orders < 20 t/month.
.3 Tolerances on quantities (spot business)
Item tonnage (t)
Tolerances (%)
< 30
± 20
30 < 40
± 15
40 ≤ 100
± 10
> 100
±5
2.10Packaging
Coils are charged gross for net, wooden pallet and spacers included.
Standard ArcelorMittal packaging
Unpickled
no paper
0
Pickled
no paper
0
paper
5
seaworthy
10
For all other packaging requirements:
After prior agreement, with a minimum of
10
2.11Certificates - Inspection
EN 10204:2004
Standard indication
Certificate of compliance with the order
2.1
0
Test report
2.2
0
Inspection certificate
3.1
5
Inspection certificate
3.2
(*)
(4)
(*) on request
(4) Electronic version: 2 EUR/t
Supplementary test, not mentioned in a standard
5
ArcelorMittal Sestao price extras list for Automotive Europe – valid as from 01/04/2015 – version 19/03/2015 (EUR/tonne)
The prices listed are in EUR/tonne (excluding taxes) and are subject to the ArcelorMittal Flat Carbon Europe S.A. General Conditions of Sale. This price list applies to the ArcelorMittal offer dedicated to
Automotive applications. It does not apply to the General Industry and Packaging Industry applications. The online English version is the valid version, not the printed version at a certain moment in time.
ArcelorMittal reserves the right to change information of this price list at any time without prior notice.
3/3
AU-PR-ST-EN
