docSikadur® VPC
download 
Report Transcription
Sikadur® VPC
Page 1 of 5 MATERIAL SAFETY DATA SHEET Sika Canada Inc. SECTION I: PRODUCT INFORMATION ® PRODUCT: Sikadur VPC USAGE: Universal rapid Polymer concrete th PART A REVISION DATE: May 27 , 2015 MANUFACTURER/SUPPLIER: SIKA CANADA INC. 601, avenue Delmar Pointe Claire, QC H9R 4A9 EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666 TDG CLASSIFICATION: UN NUMBER: Packaging Group: Resin solution 1866 III WHMIS Classification: B2, D2B Class: 3 SECTION II: HAZARDOUS INGREDIENTS Hazardous ingredients % T.L.V. # CAS LD50 (species, route) LC50 (species, route) VINYL ESTER RESIN 30-60 NOT AVAILABLE 36425-16-8 NOT AVAILABLE NOT AVAILABLE STYRENE MONOMER INHIBITED 30-60 ACGIH TWA 50 ppm 100-42-5 2 650 (rat, oral) 2 425 ppm (rat, inh. 4 hrs) METHYL METHACRYLATE 15-40 ACGIH TWA 50 ppm 80-62-6 7 900 (rat, oral) 7 093 ppm (rat, inh. 4 hrs) 3-7 ACGIH TWA 10 ppm 13463-67-7 NOT AVAILABLE NOT AVAILABLE 0.5-1.5 NOT AVAILABLE 91-66-7 NOT AVAILABLE 1 920mg/m /4H (rat) TITANIUM DIOXIDE N,NDIETHYLANILINE 3 SECTION III: PHYSICAL CHARACTERISTICS Physical State: Appearance and Odor: Liquid Grey, pungent Odor Threshold: Evaporation Rate: Vapor Density: Vapor Pressure: Not available Not available 4.00 Not available Boiling Point: Freezing Point: Density: Water Solubility: pH: % volatility by volume: Water/Oil Distribution: 101°C Not available 1.03 g/ml Insoluble Not available 0.00 Not available Page 2 of 5 MATERIAL SAFETY DATA SHEET Sika Canada Inc. PRODUCT: ® Sikadur VPC PART A SECTION IV: FIRE AND EXPLOSION HAZARDS Flammability: Yes If Yes, under what conditions: Flames, sparks Extinguishing methods: Water fog, CO2, dry chemical, foam Special Methods: Fire-fighters must wear complete protective clothing with respiratory equipment TDG Flammability Class: Flammable upper limits (% vol.): Flammable lower limits (% vol.): Flash Point (set flash closed cup): Auto-ignition temperature: Dangerous Combustion Products 3 Not established Not established 9°C Not applicable Carbon oxides, phenols Protect from mechanical impact: No Protect from static discharge: Yes SECTION V: REACTIVITY DATA Chemical stability: No If not, under what conditions: Heat, open flames, sparks, aging. Avoid excessive heating over long periods of time. Incompatibility with other material: Not known If Yes, which ones: Dangerous decomposition products: Carbon oxides, phenols Polymerization Risks: May occur Page 3 of 5 MATERIAL SAFETY DATA SHEET Sika Canada Inc. PRODUCT: ® Sikadur VPC PART A SECTION VI: TOXICOLOGICAL PROPERTIES ROUTE OF ENTRY / CONTACT Eyes: Will result in eye irritation Carcinogenicity: Not established Skin: Will result in skin irritation Toxic effects on reproduction: Not established Teratogenicity: Not established Mutagenicity: Not established Product with synergistic effects: Not known Inhalation: Ingestion: High vapor concentration may produce nausea, vomiting, headaches, dizziness, unconsciousness and asphyxia resulting in central nervous system effects May cause abdominal pain, vomiting and diarrhea This product can cause skin and respiratory sensitization. An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory problems. Page 4 of 5 MATERIAL SAFETY DATA SHEET Sika Canada Inc. PRODUCT: ® Sikadur VPC PART A SECTION VII: PREVENTIVE MEASURES PERSONAL PROTECTIVE EQUIPMENT OTHERS Gloves: Ventilation: Impervious gloves Respiratory equipment: If respiratory respiration is required, use an approved air purifying respirator Eyes: Chemical goggles and full face shield Shoes: Security shoes Clothing: Long sleeved, body covering and protective clothing Other: Procedure in case of leaks: Handling and Equipment methods: No Warehouse Requirements: Special Shipping Instructions: Waste Disposal Use adequate ventilation Remove all sources of ignition (flames, sparks, etc.). Provide adequate ventilation. Avoid prolonged breathing of vapors. Remove to a container or absorb with clay, diatomaceous earth or other suitable inert absorbent. Avoid inhalation, skin and eye contact. Wash repeatedly with soap and water during the workday. Keep all containers closed in a cool, dry and well ventilated area. Keep away from heat and open flame. See TDG class. Dispose of residues according to municipal, provincial or federal laws for disposal of chemicals. Do not incinerate closed containers. Page 5 of 5 MATERIAL SAFETY DATA SHEET Sika Canada Inc. PRODUCT: ® Sikadur VPC PART A SECTION VIII: FIRST AID Skin: Wash thoroughly with soap and water. If irritation persists, consult a physician Eyes: Rinse eyes immediately with plenty of water for at least 15 minutes. See a physician immediately. Inhalation: Remove the affected person to fresh air. If breathing is difficult, administer oxygen. Consult a physician if required. Ingestion: Do not induce vomiting. Administer large amount of water or milk if available. Do not give anything by mouth to an unconscious person. Transport to a medical facility. SECTION IX: PREPARATION INFORMATION Prepared By: Telephone #: Fax #: R & D of Sika Canada Inc. (514) 697-2610 (514) 694-2792 Notice To Reader The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material, product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's current Product Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone number listed in Section IX of this MSDS. SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY OTHERS. All sales of Sika products are subject to its current terms and conditions of sale available at www.sika.ca or 514-697-2610. AQ 191 A Date: 2012/02/01 App: S.G. Page 1 of 5 MATERIAL SAFETY DATA SHEET Sika Canada Inc. SECTION I: PRODUCT INFORMATION ® PRODUCT: Sikadur VPC USAGE: Universal rapid Polymer concrete st PART B REVISION DATE: February 1 , 2015 MANUFACTURER/SUPPLIER: SIKA CANADA INC. 601, avenue Delmar Pointe Claire, QC H9R 4A9 EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) 996-6666 TDG CLASSIFICATION: UN NUMBER: Packaging Group: Organic peroxide type D, Solid 3106 II WHMIS Classification: C, D2B, F Class: 5.2 SECTION II: HAZARDOUS INGREDIENTS Hazardous ingredients % T.L.V. # CAS LD50 (species, route) LC50 (species, route) BENZOYL PEROXIDE 40-70 ACGIH TWA 3 5 mg/m 94-36-0 7 710 (rat, oral) NOT AVAILABLE SECTION III: PHYSICAL CHARACTERISTICS Physical State: Appearance and Odor: Solid White, mild Odor Threshold: Evaporation Rate: Vapor Density: Vapor Pressure: Not available Not available Not available Not available Boiling Point: Freezing Point: Density: Water Solubility: pH: % volatility by volume: Water/Oil Distribution: Not available Not available 1.10 g/ml Insoluble Not available 0.00 Not available Page 2 of 5 MATERIAL SAFETY DATA SHEET Sika Canada Inc. PRODUCT: ® Sikadur VPC PART B SECTION IV: FIRE AND EXPLOSION HAZARDS Flammability: No If Yes, under what conditions: Extinguishing methods: Water fog, CO2, dry chemical, foam Special Methods: Fire-fighters must wear complete protective clothing with respiratory equipment TDG Flammability Class: Flammable upper limits (% vol.): Flammable lower limits (% vol.): Flash Point (setaflash closed cup): Auto-ignition temperature: Dangerous Combustion Products Not applicable Not established Not established Not established Not applicable Carbon oxides, biphenyls Protect from mechanical impact: No Protect from static discharge: No SECTION V: REACTIVITY DATA Chemical stability: Yes Dangerous decomposition products: Carbon oxides, biphenyls Not known Polymerization Risks: May occur If not, under what conditions: Incompatibility with other material: If Yes, which ones: Page 3 of 5 MATERIAL SAFETY DATA SHEET Sika Canada Inc. PRODUCT: ® Sikadur VPC PART B SECTION VI: TOXICOLOGICAL PROPERTIES ROUTE OF ENTRY / CONTACT Eyes: Will result in eye irritation Carcinogenicity: Not established Skin: Will result in skin irritation Toxic effects on reproduction: Not established Teratogenicity: Not established Mutagenicity: Not established Product with synergistic effects: Not known Inhalation: Ingestion: Will result in respiratory tract irritation May cause abdominal pain, vomiting and diarrhea This product can cause skin sensitization. An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory problems. Page 4 of 5 MATERIAL SAFETY DATA SHEET Sika Canada Inc. PRODUCT: ® Sikadur VPC PART B SECTION VII: PREVENTIVE MEASURES PERSONAL PROTECTIVE EQUIPMENT OTHERS Gloves: Ventilation: Impervious gloves Respiratory equipment: If respiratory respiration is required, use an approved air purifying respirator Eyes: Chemical goggles and full face shield Shoes: Security shoes Clothing: Long sleeved, body covering and protective clothing Other: Procedure in case of leaks: Handling and Equipment methods: No Warehouse Requirements: Special Shipping Instructions: Waste Disposal: Use adequate ventilation Remove all sources of ignition (flames, sparks, etc.). Provide adequate ventilation. Avoid prolonged breathing of vapors. Remove to a container or absorb with clay, diatomaceous earth or other suitable inert absorbent. Avoid inhalation, skin and eye contact. Wash repeatedly with soap and water during the workday. Keep all containers closed in a cool, dry and well ventilated area. See TDG class. Dispose of residues according to municipal, provincial or federal laws for disposal of chemicals. Do not incinerate closed containers. Page 5 of 5 MATERIAL SAFETY DATA SHEET Sika Canada Inc. PRODUCT: ® Sikadur VPC PART B SECTION VIII: FIRST AID Skin: Wash thoroughly with soap and water. If irritation persists, consult a physician Eyes: Rinse eyes immediately with plenty of water for at least 15 minutes. See a physician immediately. Inhalation: Remove the affected person to fresh air. If breathing is difficult, administer oxygen. Consult a physician if required. Ingestion: Do not induce vomiting. Administer large amount of water or milk if available. Do not give anything by mouth to an unconscious person. Transport to a medical facility. SECTION IX: PREPARATION INFORMATION Prepared By: Telephone #: Fax #: R & D of Sika Canada Inc. (514) 697-2610 (514) 694-2792 Notice To Reader The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material, product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's current Product Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone number listed in Section IX of this MSDS. SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY OTHERS. All sales of Sika products are subject to its current terms and conditions of sale available at www.sika.ca or 514-697-2610. AQ 191 A Date: 2012/02/01 App: S.G.
