MATERIA ROMANA FINITURA

TECHNICAL
INFORMATION SHEET
MATERIA ROMANA FINITURA
INFORMATION ON USAGE
Name
MATERIA ROMANA FINITURA
Description
Semi-covering finish. Suitable to protect surfaces
created with Materia Romana plaster and exalt the
chromatic streaking and grains typical of the “Roman
travertine” effect
Professional use.
UNI 8681 classification
One-pack, physical drying, acrylic, matt paint finishing
coat, dispersed in water
(B4.C.O.A.2.FA)
Intended use
Indoors / Outdoors
Suitable substrates
Concrete plaster, lime-based paint and plaster, painted
plaster, exposed reinforced concrete, precast concrete
panels and elements, fibre cement and brick
CHARACTERISTICS
Composition/appearance
Physical state: liquid
Type of resin/binder: acrylic (UNI 8681: FA)
Appearance:matt finish
Dimensional properties
Bulk volume: 1310 ± 50 g/l
Performance characteristics
Solids content by weight: 61 ± 2%
pH: 8.,5 – 9
Colours available
Base white semi-covering and Materia Romana Colour
Card. It can be coloured by tintometer.
APPLICATION
Environmental conditions
Ambient temperature: min +10°C, max +40°C
Relative ambient humidity: max 80%
Equipment
Brush (Klimt Brush), short-haired wool roller (Magritte
Roller)
Dilution
Diluent type: water
Dilution:
first coat 25-30% = 250–300 ml per litre of product
second coat (when the finish is coloured) 30-50% =
300-500 ml per litre of product
Application procedure
For a white finish apply one coat of MATERIA ROMANA
FINITURA MA00 (white semi-covering) over the entire
surface. For coloured finishes apply one coat of
MATERIA ROMANA FINITURA MA00 (white semicovering) trying not to enter the grains. Apply a second
coat in the desired dye waiting 4 hours between coats
over the entire surface and then removing the excess
with a sponge
Drying or curing time at ≈ 23°C
On surfaces: 4 hours
Coverage (with two coats)
7-8 m2/l
Recommended use per m2: 140 ml
Coverage per package (5 l): 35-40 m2 approx.
Coverage will vary depending on absorption of the
substrate
Overpainting
Compatibility with other products: compatible with all
solvent free products
TECHNICAL
INFORMATION SHEET
MATERIA ROMANA FINITURA
Warning advice for the user
STORAGE
See safety sheet
Acceptability of odour
Packaging
Odourless
1–5l
Storage
Minimum and maximum temperatures: +5°C +30°C (in
cool, frost-free storage)
Stability in original containers: 365 days
SAFETY INFORMATION
Classification in relation to risk
Requires risk labelling according to:
Legislative Decree (DL) 52 dated 3 February 1997
amended by DL 90 dated 25 February 1998, Ministry of
Health Decrees (DMS) dated 4 April 1997, 28 April
1997, DL 285 dated 16 July 1998, EU Directive
1999/45/EC dated 31 May 1999, DMS dated 7 July 1999,
10 April 2000, 26 January 2001 and 11 April 2001, EU
Directives 2001/58/EC, 2001/59/EC, 2001/60/EC and
subsequent amendments
Identification of waste material type
Complies with EEC decision 2000/532/EC amended by:
2001/118/EC, 2001/119/EC, 2001/573/EC and subsequent
amendments
Plastic containers:
These can be classified as code 150102. Potentially
treatable as urban waste according to individual local
authority regulations.
Metal containers:
These can be classified as code 150104. Potentially
treatable as urban waste according to individual local
authority regulations.
If undried paint remains in the containers, these can be
classified as code 080112
Dispose of in accordance with local regulations
Please note: This Technical Information Sheet is compiled to the best of our technical/scientific knowledge. Nevertheless, it is not binding and does not imply that we are
responsible, as the conditions of use are outside our control. It is recommended that the product is always checked as being suitable for the specific application.
Company with quality management system certified UNI EN ISO 9001
Issue 09-2014
IVAS Industria Vernici S.p.A. – Via Bellaria, 40 – 47030 San Mauro Pascoli (FC) – Italy
Phone +39 0541 815811 – Fax +39 0541 815815 – www.metropolis-ivas.com