Gas booster package

Transcription

Gas booster package
 Gas booster package
This gas booster package is supplied as a complete package with all the hoses and valves needed to start using your booster straight from the box. The booster is a compressed air driven booster designed specifically for Oxygen and Nitrogen service. The booster package is well suited for charging cylinders and for pressure testing. It's unique design ensures that there will be no cross contamination between the drive air and the booster gas. The booster can safely be run from a typical workshop pressure compressor or directly from a high pressure system or cylinder via a regulator (option). The unique design of the booster unit means it is extremely economical on use of drive air. The booster will boost air, oxygen or nitrogen to a maximum pressure of 620 bar (with 300 bar on the inlet), it is safe and easy to use, and has a long service life. The manual supplied provides users with all the information and guidance required for operation, care, servicing and repair; should a fault occur. We offer the gas booster as a complete package, with all the hoses on inlet and outlet and a stop/venting charging valve on the outlet. The package is as standard supplied in a plastic Peli‐case and a wide range of hose end adaptors are available to suit all common connection. Specification: Flow rate: 42 Nl/min* *at 50 bar on the inlet and 8 bar drive pressure) Boost ratio: Booster min inlet pressure: Booster max outlet pressure: Drive gas pressure: Approx dimensions, booster: Approx weight, booster: Connection, booster inlet: Connection, booster outlet: Connection, inlet hose: Connection, outlet valve: 1:32 50 bar 620 bar <10 bar max 270 * 122 * 109 mm 5,4 kg 2 of 1/4" BSPP(M) 2 of 1/4" BSPP(M) 1/4" BSPP(F) 1/4" BSPP(F) The IS‐Boost package includes ….. •
•
•
•
•
•
•
•
Air operated booster model ROB 32D. Drive air regulator, ball valve and connector for drive air. Relief valve on outlet, 220 or 330 bar. In‐ and outlet hose, 2 m. In‐ and outlet gauges 0‐400 bar. Charging valve with vent‐function on outlet hose. All components assembled on a aluminium plate with handles. The package is supplied in a plastic, water proof Peli‐case. Options
‐
‐
‐
‐
‐
‐
HP drive air drive regulator with hose and quick connector HP hose with finger tight connectors Connectors for oxygen, air, nitrogen, helium, etc Digital pressure gauges In‐line filter when booster is used for air For applications above 300 bar Other booster configurations are also available. _____________________________________________________________________________________________________________________________________________
Distributör/Distributor
Adress/Address
Telefon/Telephone
Telefax/Fax
E-post/E-mail
Mässvägen 6, Kustparken
08-747 00 05
08-747 11 20
info@curt-nyberg.se
S-624 70 Fårösund
+46-8-747 00 05
+46-8-747 11 20
www.curt-nyberg.se
SWEDEN