MarineENHANCER Image Enhancement System

Transcription

MarineENHANCER Image Enhancement System
OceanTools Drilling Technologies
Technologies
OceanSENSE
VMS-2/VMS-5
Wepco Anchors
OceanSENSE
Cement Dye Detection & Leak Detection
The OceanTools OceanSENSE Dye
Detection System is field proven on
hundreds of offshore jobs with a very
impressive near 100% detection rate.
A single unit can be used to detect leaks from
subsea infrastructure AND detect cement dye
during cementing operations.
OceanSIP
Exists in ROV portable and diver held form.
OceanSENSE has a leak detection range of up to 7meters and is operated with ROV/diver
lights on, allowing for a much smoother, safer and faster operation. OceanSENSE is
exceptionally sensitive - 50x more sensitive than the human eye and conventional blacklight systems - detecting tracer dyes down to 6 parts per billion with software that guides
the operator to the source of the leak.
OceanSENSE-RM
When deployed during well cementing jobs dye may be added to either the packer or to the
actual cement. As it flows out of the casing the OceanSENSE unit immediately detects it and
announces the presence both visually and audibly.
Works with a wide range of dyes but best results obtained with the use of OceanDYE.
VMS-2
Verticality Measurement Systems
VMS-2 & VMS-5
The OceanTools Verticality Measurement Systems - the VMS-2 and
VMS-5 - are integrated solutions consisting of market leading equipment
innovatively packaged to make them as low a profile as possible and ideal for
passing through the Texas Deck.
Two models depending on customer’s requirements:
The VMS-2 provides pitch and roll information via an OceanDISTIL
inclinometer with integral subsea display.
The VMS-5 provides survey grade heading, pitch, roll, azimuth and angle
information via an OceanFOG North Seeking Gyro outputting to an
OceanDISP subsea display.
With vertical scrolling subsea displays, integral subsea battery packs and easy deploy / easy recover ‘delta’
mounting brackets, both VMS systems are ROV recoverable and portable, extremely robust.
OceanTools Ltd, OceanTools House, Claymore Drive, Aberdeen AB23 8GD. UK.
T: + 44 1224 709606 E: sales@oceantools.co.uk
www.oceantools.co.uk
OceanTools Drilling Technologies
Guide Wire
Anchor
WEPCO
Guide Wire Anchors & Lifting Anchors
OceanTools is the UK distributor for the sales, rental, support and
overhaul of Stavanger-based Wepco’s industry standard range of
ROV operated Guide Wire Anchors and ROV operated Lifting
Anchors.
The ROV-operated Guide Wire Anchors are easily installed to & recovered
from any standard API 3” guide post using the ROV’s manipulator. Safety
features include a shear-pin to allow recovery in an emergency situation.
The ROV-operated Lifting Anchor is specially designed for the
lifting of guide-posts. The Lifting Anchor is certified for 4 tonnes
and will fit any standard API 3” guide post. Safety features
include a shear-pin to allow recovery in an emergency situation.
Both the Guide Wire Anchors and the Lifting Anchors are
constructed from stainless steel and are CE certified.
Lifting Anchor
OceanSIP
Digital Bullseyes
OceanSIP & MiniSIP
The OceanTools OceanSIP and MiniSIP are precision engineered self-contained
subsea inclinometer packages combining several OceanTools products into
one robust frame to offer an integrated subsea inclination measurement
system.
At the heart of the SIP is a very precise dual axis inclinometer housed in the
same underwater housing as the display.
The SIP contains an integral battery pack which obviates the need for an
umbilical to the surface. The SIP remains in a low power consumption
quiescent state until an ROV or diver shines a light on the display which then
wakes up & activates the system before it returns to sleep after a
programmable delay.
Applications for the OceanSIP and MiniSIP include the installation of subsea manifolds, templates and other subsea
structures.
OceanTools Ltd, OceanTools House, Claymore Drive, Aberdeen AB23 8GD. UK.
T: + 44 1224 709606 E: sales@oceantools.co.uk
www.oceantools.co.uk