3M™ Ionized Air Blower 9300

Product Data Sheet
3M™ Ionized Air Blower 9300
The use of ionized air in electronics work environment
will help remove the build-up of potentially damaging
static charge. Air ionizers are primarily used to control
static charge on nonconductive material by generating a
well-balanced flow of ionized air particles, which helps
neutralize stray electrostatic build-up on a surface.
Charges are dissipated in seconds and the possibility of
a damaging electrostatic discharge (ESD) is minimized.
The 3M ionized air blower 9300 blankets the surface
of bench with ionized air to help prevent static from
damaging electronics.
Features
• Eliminate the build-up of potentially damaging static charges in work area and on insulator materials.
• 3-fan, 8-point ion generation technology capable of generating large amounts of ions for instantaneous
neutralization.
• Variable speed options - low, medium, high fan-speed control.
• Low speed option for lightweight materials handling on table.
• High speed where rapid neutralization is required.
• Easy-access cover for easy cleaning of fan and emitters.
• Power-on indicator lights.
• White finish, metal housing.
Specifications
Description
Typical Values
Method
Operating voltage and Frequency
230VAC/50Hz, 110VAC/60Hz
–
Power Consumption
40 Watts
–
Indicators
Amber light on power switch
–
Ion Emission
Steady-state DC
–
Balance Voltage
± 15V (25 ± 5˚C, 45 ±10% RH)
ANSI/ESD STM3.1-2006 (Note: *1)
Decay Time
3 sec.
ANSI/ESD STM3.1-2006 (Note: *1)
Air Flow Volume
45-90 CFM per fan
–
Air Flow Coverage
600mm x 600mm x 900mm
–
Audible Noise
High Fan Speed: 55 dB
Low Fan Speed: 45 dB (Note:*2)
–
Ozone Level
<0.05 ppm
IEC 60335-2-65 ED.2.1
Dimensions
113mm H x 1080mm W x 172mm D
–
AC Cable Length
1.8 meter
–
Weight
4 .8 Kg
–
Certifications and Approvals
CE, RoHS(EU)
–
Warranty
1 Year
–
*1: High fan speed, measurement taken 45 cm below fan.
*2: Measurement taken 100 cm at angle of 45 degrees below fan
3M™ Ionized Air Blower 9300
m
2m
17
mm
80
10
113 mm
RoHS
Compliant
2011/65/EC
3M is a trademark of 3M Company.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be
reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is
suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the
products which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall
have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of 1 year from the time of purchase. 3M MAKES
NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s
option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not
be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory
asserted.
Electronic Solutions Division
Static Control Products
926 JR Industrial Drive
Sanford, NC 27332-9733
Toll-Free: 866-722-3736
International: 919-718-0000
Email: 3mstaticinfo@mmm.com
www.3Mstatic.com
Please recycle.
© 3M 2013. All rights reserved.
78-9101-6701-0