Water Supply / Drainage / Vehicle Crossing Service Connection Fact

Water Supply / Drainage / Vehicle Crossing
Service Connection Fact Sheet
A Service Connection Application shall be completed and a site and drainage plan provided
with all Building Consent Applications, whether or not a new water/drainage connection or
vehicle crossing is being installed or relocated.
If no new service connection is required, why am I still required to complete the application
form and provide a site/drainage plan?
All Service Connection Applications are processed separately to your Building Consent. In order to ensure that the
existing services meet the requirements of your property and that any site works will not impact on the services currently
available, the information provided via the service connection application form and the attached site plan will be
reviewed to ensure that no further action is required.
Service connection application details
Fees
It is important that all required details are supplied on
the application form (even if ‘No Services Required’
has been ticked). Once the application and site plan
have been reviewed by Council, if it becomes
necessary to contact the applicant or the property
owner, then it will speed up this process if all of the
correct information has been supplied.
All fees will be invoiced either separately, or as part of
a consent application. Please see Tauranga City
Council’s website for application fees and charges.
Site plans
As well as the application form, an A3 copy of a
detailed site and services plan/s showing all relevant
information is required for Council to process the
application. The plans shall clearly show: Property
boundaries, location of existing services, location of
proposed connection, location of obstructions and size
and type of materials.
Swimming pools
It is a Tauranga City Council requirement that all
properties that have a swimming pool shall have a
Double Check Valve installed immediately after the
water meter at the boundary. This is to protect the
public water supply from any potential contamination.
The Health (Drinking Water) Amendment Act 2007
authorises Council to enforce backflow prevention at
the boundary whether this is new or historic. Building a
swimming pool requires a Service Connection
Application to be completed.
Bond (refundable)
The Asset Protection Bond will be available for refund
once the Service Connection As-built details have
been received (if a Service Connection Approval has
been granted) and the Code of Compliance
Certification has been issued. A Tauranga City
Council Development Monitoring Advisor will visit the
site in order to establish that the as-builts received are
correct and that Council’s Infrastructure remains
undamaged.
Information to accompany this
application
All information required for this application must be
supplied where applicable.
Declaration
This must be signed by the applicant and they must
indicate whether they are the owner or acting on behalf
of the owner.
Water Supply / Drainage / Vehicle Crossing
Service Requirements
1. Please complete all of the details required on this
page and sign the Services Declaration below.
•
2. Provide an A3 copy of the site and drainage plan.
3. Read information on the following pages in order to
establish if you are required to make an application
for water/drainage or a vehicle crossing. Then:
Tick the box(es) below indicating the service/s
you require and complete the applicable service
connection page/s following.
5. If no services are required:
•
4. If an application for services is required:
Tick the box for No Services Required and
supply an A3 copy of the site and drainage plan,
the property’s water meter number, and sign the
declaration below.
Are you applying for services as part of a:
☐ Building Consent
BC# _______________
☐ Resource Consent
RC# _______________
☐ Other
Location of work/building
Street Address
Legal Description
Property owner’s representative
(if different from the property owner)
Company Name
Contact Person
Postal Address
Post Code
Phone
Mobile
Email
Property owner details
Name
Postal Address
Post Code
Phone
Mobile
☐ No services required
Email
Please supply Water Meter Serial #
Services applied for
☐ Water
☐ Wastewater (sewer)
☐ Stormwater
☐ Vehicle crossing
OFFICE USE ONLY: IN SS ☐ / APPL IN OB ☐ / FEES ENT ☐ / GEN REF ☐ / NFA - Title ☐ / NFA – Close Gen Ref ☐ / CLOSE SS ☐
Declaration
1.
I am the owner of the property OR I am authorised to make this
declaration by the owner (delete whichever is not applicable).
2.
I acknowledge that this Application is subject to, and I agree to
comply with, the conditions of Tauranga City Council’s Water Supply
Bylaw 2007 (“the Bylaw”) and Infrastructure Development Code.
Name
Signature
3.
I shall notify Tauranga City Council in writing of any change of
use of the premises and I understand that failure to comply with
this requirement is an offence under Section 114 of the Building
Act 2004 and is subject to a fine of up to $5,000.
4.
All information provided on this form is true and correct.
Date
Water Services
Connection Application
If you tick yes to any of the requirements on this page:
1. Complete all of the information required in each section of this page for a Water Services Connection Application.
2. Tick the Services applied for box(es) on the front page of this application and ensure that all relevant information is
completed.
I propose to:
☐ Install a New Connection
Using:
☐ 20mm (standard domestic supply)
Connection Size (Internal Diameter):
☐ 25mm
Meter Size:
☐ 20mm
☐ 25mm
☐ 50mm
☐ 40mm
☐ 100mm
☐ 50mm
☐ 80mm
☐ 150mm
☐ 200mm
☐ 100mm
☐ 150mm
☐ 200mm
Either for a:
☐ Single Dwelling
☐ Body Corporate
☐ Multiple Dwellings
☐ Other, please specify ________________________________________________________________________________________________
Or for a:
☐ Commercial / Industrial Building
Please supply Commercial / Industrial Water Consumption Estimation:
Average Flow (Litres/sec) _________________________
Peak Flow (Litres/sec) _________________________
I propose to:
☐ Upgrade/Alter an existing water connection
☐ Relocate an existing water connection
☐ Disconnect an existing water connection
☐ Install a swimming pool
Will your Land Use activity include any of the following?
☐ Commercial Drink Dispensers
☐ Swimming pool / Fountain
☐ Storage Tanks
☐ Irrigation System
☐ Secondary Water Supply
☐ Chemical Use
☐ Car / Factory Washing
☐ Veterinary / Animal Water Use
☐ Mortuary Activities
☐ Pesticides / Pest Control
☐ Sluice Sink / Bed Pan Washers
☐ Dental Equipment / Beauty Salon or Hairdressing Sinks
☐ Laboratory
☐ Fire Sprinkler System – this will require a:
Fire Flow Test completed by an approved Fire Protection Agent for Commercial/Industrial Fire Protection Supply)
Fire Sprinkler Design for a new Domestic Fire Sprinkler System)
☐ Any Other Hazard Classified in G12/AS1 of the NZ Building Code (Please specify) _______________________________________________
_____________________________________________________________________________________________________________________
Drainage Services
Connection Application
If you tick yes to any of the requirements on this page:
1. Complete all of the information required in each section of this page for a Drainage Services Connection Application.
2. Tick the Services applied for box(es) on the front page of this application and ensure that all relevant information is
completed.
Wastewater Connection
I propose to:
☐ Install a new _________ mm Wastewater connection to:
☐ Manhole
☐ Main
☐ Y-Junction off existing
☐ Upgrade/Alter an existing Wastewater connection
☐ Relocate an existing Wastewater connection
☐ Install an on-site effluent treatment system
Stormwater Connection
I propose to:
☐ Install a new ___________ mm Stormwater connection to:
☐ Manhole
☐ Main
☐ Sump
☐ Kerb Connection
☐ Upgrade/Alter an existing Stornwater connection
☐ Relocate an existing Stormwater connection
Note: On-site effluent treatment systems shall be designed and installed in accordance with BoPRC
requirements. Ph: 0800 368 267 for further info.
A Trade Waste consent is required for any Wastewater discharge from a trade activity. Contact TCC Trade
Waste Officer.
Vehicle Crossing
Connection Application
If you tick yes to any of the requirements on this page:
1. Complete all of the information required in each section of this page for a Vehicle Crossing Services Connection
Application.
2. A Site plan must be provided with this application *(see further information on requirements below).
3. Tick the Services applied for box(es) on the front page of this application and ensure that all relevant information is
completed.
I propose to:
☐
Construct a new vehicle crossing where the vehicle crossing does not comply with the Tauranga City Council’s Infrastructure
Development Code (IDC). See information below for compliance requirements.
Width ______________________
Length _________________________
Vehicle Crossing Compliance Information
The vehicle crossing shall be no wider than 4.5m at the kerb (see IDC drawing T431 attached).
Distances from the edge of the vehicle crossing and any Council assets shall be as follows:
•
2m from the drip line of any street tree.
•
0.3m from the edge of a stormwater catchpit apron.
•
0.5m from a lamp post or street sign.
•
3m from the edge of a demarcated bus stop.
(If any of the above items have to be moved to allow the crossing to be constructed, the necessary work, if approved, will be
carried out by Tauranga City Council at the owner’s expense).
Vehicle Crossing Plan Information
*
A site plan must accompany the vehicle crossing services connection application which shows the location; width and length of the vehicle
crossing, as well as plan dimensions, grades and adjacent Council assets shown in the vehicle crossing compliance information above.
The drawing must also show compliance with the following:
Plan dimensions and grades shall be as shown on attached drawings T431 and T432. If the applicant wishes to exceed any of the specified
dimensions and grades please complete this Vehicle Crossing Connection Application form.
Note: Existing manholes, hydrants and valve boxes may be located in new crossings but must be re-levelled so
as to be flush with the new surface. In the case of a fire hydrant, the clearance between the top of the
spindle and the underside of the cover must be maintained between 100mm min. and 250mm max. This
work MUST be carried out by one of Council’s Licensed Contractors.
Vehicle Crossing
Connection Application
Vehicle Crossing
Connection Application