Alsteel Defender commercial 2 rail solutions up to 1800mm high

ALSTEEL DEFENDER
2 Rail Fence Profile
Post and Rail Insert
Picket Nylon Insert with Locking Rod
Heights
Picket
Heights
Alsteel
Defender
1000 mm
1250 mm
1500 mm
1800 mm
Rod
Material Specifications
Standard Panel Sizing's
Rail or
Panel
length
Post centre
to Post
centre
Posts
Rails
Pickets
(verticals)
Half Panel
1227mm
1240mm
Standard Panel
2432mm
2445mm
NB all panel lengths can be cut to fit your
installation requirements
Picket centres are 120mm with 95mm
clearance between pickets
Spear
Flat Top
65 by 65 by 1.6mm
40 by 40 by 2 mm
25.4 mm square by 1.2 mm
The base product for Alsteel Tubular Fencing is
"GALVSTEEL" coil G250 Z275 manufactured in New
Zealand by New Zealand Steel.
Due to the mill process on forming the tube, the end product has a tensile
strength to G300 Grade
Styles
NB: for safety
Can be
purposes,
configured as
recommend not The original
a level top,
to be used on Flat top fence
high low or
fences under
arched top.
1800mm high
Structural
Grade
NZS Yield Stress Tensile Elongation % Longitudinal
3441 MPA min. Strength
on 50mm
bend test
Base
Mpa min.
min.
Radius of bend
Grade
G300
300
370
20
0.5t
t= thickness of test piece
Most styles can be mixed and matched to
create your own design. Long pickets can be
ordered to protect from intrusion where drains
or dips may exist.
All products can be provided as either a powder coated or a
Galvanised finish to meet your design requirements
Your local ALSTEEL Fencing Distributor is:
See www.fencingsystems.co.nz for a
gallery of previously installed fences and
ideas
Premium Alsteel Defender tubular fencing is provided with a standard 5 year material and manufacture
warranty. See web site for terms and conditions
Call 0800 622 622 for a FREE quote