Continuous Blowdown Ball Valve 510 PN 16 DN 15

Data Sheet 810160-03
Issue Date: 02/15
Continuous Blowdown Ball Valve 510
PN 16 DN 15
Purpose and Application
Technical Data
Ball valve with electric actuator for discharging boiler blowdown from steam boilers. The continuous blowdown ball
valve 510 is designed for use with the boiler blowdown
controller LRR 1-50, LRR 1-52 or the conductivity switch
LRS 1-50 and the conductivity electrodes LRG 16-9 or LRG
16-4. The equipment combination is designed for use in
automatically operated installations, e. g. in compliance with
the directives for operation without constant supervision to
TRD 604 EN 12952 and EN 12953.
Service pressure
10 barg at 185°C
Design
The continuous blowdown ball valve 510 consists of a maintenance-free three-piece stainless steel ball valve with an
integrated electric actuator.
Design
510
Continuous blowdown ball valve 510 with screwed sockets
BSPT ½".
Function
The TDS (= total dissolved solids) content of the boiler water
is monitored by the conductivity controller by means of a
conductivity electrode. When the set point adjusted on the
conductivity controller is exceeded in the boiler water ( e. g.
due to increased steam outlet), the conductivity controller
switches the relay for the valve position to "OPEN". The
degree of opening and consequently the flowrate of the ball
valve in "OPEN" position can be adjusted with a control cam
on the servomotor.
KVS value
10.2 m³/h
Nominal size
BSPT 1/2˝, DN 15
End connection
Screwed sockets
Material
1.4401
Actuator
EF 0.7
Mains voltage
230V, 50/60 Hz
Power consumption
4 VA
Actuator speed
60 sec. for 90°
Torque
15 Nm
Ambient temperature
Max. 60°C
Protection
IP 65
Actuator case material
Housing: Die-cast aluminium
Cover: Plastic
Weight
approx. 2.5 kg
Important Notes
The continuous blowdown valve must be installed in the
continuous blowdown line of the boiler (see example of installation).
.
Dimensions
115
100
Continuous Blowdown
Ball Valve 510
PN 16 DN 15
Order & Enquiry Specification
GESTRA Continuous blowdown ball valve
Continuous blowdown ball valve 510
Acceptance inspection......................................................
Length of installation 76 mm
The following test certificates can be issued on request, at extra cost: In accordance with EN 10204-2.1, -2.2 and -3.1B.
All inspection requirements have to be stated with the order.
After supply of the equipment certification cannot be established. For tests and inspection charges please consult us.
203
160
Ancillaries
Conductivity controller LRR 1-50, LRR 1-52
Conductivity switch LRS 1-50
25
Conductivity electrodes LRG 16-9, LRG 16-4
76
Examples of installation
Example 1:
Conductivity electrode LRG 16-4
Conductivity switch LRS 1-50
Continuous blowdown ball valve 510
Example 2:
Conductivity electrode LRG 16-9
Continuous blowdown controller LRR 1-50
Continuous blowdown ball valve 510
Example 3:
Conductivity electrode LRG 16-4
Continuous blowdown controller LRR 1-52
Continuous blowdown ball valve 510
Supply in accordance with our general terms of business.
GESTRA AG
P. O. Box 10 54 60, D-28054 Bremen
Münchener Str. 77, D-28215 Bremen
Tel. 0049 (0) 421 / 35 03 - 0, Fax 0049 (0) 421 / 35 03-393
E-mail gestra.ag@flowserve.com, Web www.gestra.com
810160-03/03-2015cm (804066-02) · GESTRA AG · Bremen · Printed in Germany