View Details

Transcription

View Details
SCHEDULE OF QUANTITY
Sl. No.
Issued to:
Name of work
Preparation of Currency-Chest including security-guard cabin in the Bank's main building
at The Mall,Shimla.
Sl. No.
Particulars/Item
1 Removing white wash or colour
wash by steel wire brushing and/or
scrapping sand papering and
preparing the wall surface smooth
including necessary repairs to
scratches complete.
Quantity
40.33 Sqm
Rate in figures and words
Unit
Per
Sqm
2 15mm cement plaster in single coat 69.31 Sqm
on the rough/fair side of
brick/concrete/stone walls for
interior/exterior plastering upto
floor two level including arrises,
internal rounded angles, chamfers
and/or rounded angles not
exceeding 80mm in girth and
finished even and smooth in Cement
Mortar 1:5 (1 Cement: 5 Sand)
Per
3 Supplying and applying bitumeneous 40.33 Sqm
Per
Sqm
solution primer on roof and/or wall
surface at 0.24 litre per sqm.
4 Grading floor/passage for water
treatment with cement mortar 1:3
(1 Cement:3 sand)
Sqm
0.55 Cum
Per
Cum
Page 5 of 11
Amount
Sl. No.
Particulars/Item
Quantity
5 Kota stone slab flooring 20mm
(average) thick base of cement
mortar 1:4 (1cement:4sand) laid
over and jointed with grey cement
slurry mixed with pigment to match
the shade of the slab including
rubbing and polishing complete.
25mm thick
32.26 Sqm
6 Brick work using common burnt clay
1.17 Cum
Rate in figures and words
Unit
Per
Sqm
Per
building bricks in superstructure
above plinth level upto floor two
level in Cement Mortar 1:6
(1Cement: 6 Sand) First Class Bricks
7 Providing wood work in frames of
doors, windows , c/windows and
other frames wrought, framed and
fixed in position. 2nd class deodar
wood.
8 Providing 40X3 mm flat iron hold
Cum
0.15 Cum
Per
Cum
6 Nos
Each
0.26 Cum
Per
fast 40 cm long including fitting to
frame with 10mm dia bolts and nuts
and wooden plugs and embedding in
CC block 30X10X15 cm 1:3:6
9 Providing wood work in trusses,
purlins, rafters, posts, post plates,
wall plates and the like wrought,
framed hoisted and fixed in position.
10 P/F panelled, glazed or panelled and
Cum
1.89 Sqm
Per
glazed shutters for doors, windows
and C/windows including black
enameled iron butt hinges with
necessary screws. 35mm thick, 1st
class deodar wood.
Sqm
Page 6 of 11
Amount
Sl. No.
Particulars/Item
11 P/F board partitions with butt
Quantity
4.52 Sqm
Rate in figures and words
Unit
Per
jointing and nails (frame work and
cover fillets to be measured and
paid for separately). Prelaminated
board bwp phenol bonded
exterior/interior grade both sides.
Sqm
12mm thick.
12 Supplying and cutting of glass panes
7.35 Sqm
Per
as per required sizes for fixing in the
partitions (frame work and cover
fillets to be measured and paid for
separately). Plate glass 5.5 mm
thick.
13 P/F plain square-
Sqm
78.80 Rmtr
Per
edged/taper/corner cover fillets
(beading) 40mmx12mm section with
headless nails in partitions including
mitring at junctions. 1st class Indian
teak wood.
14 Providing and fixing M.S. grills of
Rmtr
79 Kg
required patterns in wooden frames
of windows etc. with MS flats,
square or round bars with round
headed bolts and nuts or by screws
including applying a coat of read
lead paint. Plain grill.
Page 7 of 11
Per Kg
Amount
Sl. No.
Particulars/Item
15 Providing and fixing in position
Quantity
3.24 Sqm
Rate in figures and words
Unit
Per
collapsible steel shutters with
vertical channels
20mmx10mmx2mm and braced
with flat iron diagonals 20mmx5mm
size with top and bottom rails of Tiron 40mmx40mmx6mm with 38mm
dia steel pulley complete with bolts
and nuts locking arrangements,
stoppers, handles, including applying
Sqm
a coat of read lead paint.
16 P/F bright finished brass 100mm
mortice latch and lock and a pair of
levers, handles with necessary
screws etc. complete.
Godrej/Harrison Make.
1 No.
Each
17 Applying Birla white wall care putty
166.39 Sqm
Per
over plaster surface after thoroughly
brushing the surface free from
mortar drops, dust, loose materials
and other foreign matters sand
papered smooth to give final matter
Sqm
finish to the surface complete.
Page 8 of 11
Amount
Sl. No.
Particulars/Item
18 Distempering (two coats) with oil
Quantity
166.39 Sqm
Rate in figures and words
Unit
Per
bound washable distemper of
approved brand and manufacture
and of required shade on
undecorated wall surfaces to give an
even shade over and including a
priming coat with distemper primer
of approved brand and manufacture
after thoroughly brushing the
surface free from mortar droppings
and other foreign matter and also
including preparing the surface even
and sand papered smooth. priming
coat with distemper primer.
19 Distempering (two coats) with oil
bound washable distemper of
approved brand and manufacture
and of required shade on
Sqm
32.26 Sqm
Per
undecorated ceiling and/or sloping
roofs to give an even shade over
and including a priming coat with
distemper primer of approved brand
and manufacture after thoroughly
brushing the surface free from
mortar droppings and other foreign
matter and also including preparing
the surface even and sand papered
smooth. priming coat with
distemper primer.
Sqm
Page 9 of 11
Amount
Sl. No.
Particulars/Item
20 Painting two coats (excluding
Quantity
10.53 Sqm
Rate in figures and words
Unit
Per
priming coat) on new steel & other
metal surfaces with readymixed
paint, brushing oil, grease to give an
even shade including cleaning the
surface of all dirt, dust and other
foreign matter:- With white
readymixed paint.
21 Polishing two coats with french
polish on new wood and wood
based surfaces to give an even
surface including cleaning the
surface of all dirt, dust and sand
papered smooth and including a
coat of wood filler
22 P/F digital wall tiles 300X600X8mm
Sqm
27.65 Sqm
Per
Sqm
74.14 Sqm
Per
in skirting, risers of steps and dado
12mm thick cement mortar 1:3 (1
cement : 3 Sand) and jointed with
cement slurry. Kajaria make.
Sqm
Page 10 of 11
Amount
Sl. No.
Particulars/Item
23 Required demolitions of cupboards
Quantity
Rate in figures and words
L.S.
Unit
Nil
in commercial-board,
cutting/removal of aluminum
section paritions & ceilings and steel
railings with the use of welding set
and disposal of same within a lead
of 50 mtrs. Estimated for Rs.5500/Total
General Manager
Name of the Contractor/firm/party
Address
Telephone/Mobile No.
Fax No.
Page 11 of 11
Amount