13PW146RCO CONSOLE TABLE

Product Instructions for:
13PW146RCO CONSOLE TABLE
For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 1
13PW146RCO CONSOLE TABLE
Before beginning assembly, separate all parts and carefully study the parts diagrams
below. Review all parts and hardware before disposing of any packaging. You may
receive extra hardware with your unit. Call Customer Service for missing hardware.
Parts List
A: Top Frame (1)
B: Shelf (1)
C: Back Panel (1)
D: Bottom Panel (1)
E: Post (2)
1: Flat Washer (6)
2: Spring Washer (6)
3: Bolt 1/4” * 1-7/8”L (6)
4: Allen Wrench (1)
5: Cam Bolt (5)
6: Cam Lock (5)
7: Plastic Cover (5)
8: Wood Dowel (7)
9:Bracket (4)
10: Screw For Bracket
1/8” x 5/8”L (4)
11: Screw For Wall
9/32” x 1-1/2”L (4)
12: Plastic Strap (2)
13: Plastic Anchor (4)
For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 2
13PW146RCO CONSOLE TABLE
Assembly Instructions
Step 1
Insert Cam Locks (6) into pre-drilled
holes on Shelf (B).
Screw Cam Bolts (5) into pre-drilled
holes of Posts (E) and Back Panel (C).
Attach Shelf (B) to Back Panel (C) and
Posts (E), by inserting Wood Dowels
(8) and Cam Bolts (5) into
corresponding pre-drilled holes
until Shelf (B) meets Posts (E) and
Back Panel (C).
Tighten by rotating Cam Locks (6)
clockwise with Phillips screwdriver (not
included).
Cover cam lock holes with Plastic
Covers (7).
Figure 1
Step 2
Insert Cam Locks (6) into pre-drilled
holes on preassembled unit from
Figure 1.
Screw Cam Bolts (5) into pre-drilled
holes on Bottom Panel (D). Attach
preassembled unit from Figure 1 to
Bottom Panel (D) by inserting Wood
Dowels (8) and Cam Bolts (5) into
corresponding pre-drilled holes until
preassembled unit from Figure 1 and
Bottom Panel (D) meet. Tighten by
rotating Cam Locks (6) clockwise with
Phillips screwdriver.
Insert Bolts (3) through Spring Washers
(2) and Flat Washers (1) to connect
Bottom Panel (D) to Posts (E) using
pre-drilled holes, then tighten Bolts (3)
with Allen Wrench (4).
Cover cam lock holes with Plastic
Covers (7).
Figure 2
For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 3
13PW146RCO CONSOLE TABLE
Assembly Instructions
Step 3
Attach Top Frame (A) to preassembled
unit from Figure 2 by inserting Wood
Dowels (8) into corresponding pre-drilled
holes until Top Frame (A) and
preassembled unit from Figure 2 meet.
Insert Bolts (3) through Spring Washers
(2) and Flat Washers (1) to connect
preassembled unit from Figure 2 to Top
Frame (A) using pre-drilled holes, then
tighten Bolts (3) with Allen Wrench (4).
Figure 3
Step 4
Use Screws (10) to connect Brackets (9)
to the back of Top Frame (A) as shown.
Tighten Screws (10) with Phillips
screwdriver.
Drill 3/16” pilot holes in near proximity of
Brackets (9) attached to the back of Top
Frame (A). Tap the Plastic Anchors (13)
into pilot holes in the wall.
Use Screws (11) to connect Brackets (9)
to the Plastic Anchors (13) on the wall.
Tighten Screws (11) with Phillips
screwdriver.
Move this item close to the wall Brackets
(9) and tie in both Brackets (9) with
Plastic Strap (12) as shown in diagram.
Figure 4
Now your Console Table is ready to use!
For assistance with assembly or questions contact:
Wayfair Customer Service, 877-WAYFAIR (877-929-3247) | www.wayfair.com
PAGE 4