Shalilac Deck Finish - Shalimar Paints Industrial Business
Transcription
Shalilac Deck Finish - Shalimar Paints Industrial Business
MARINEGUARD PROTECTIVE COATINGS SHALILAC DECK FINISH A durable, weather-resistant coating based on Synthetic resin medium for the protection of Steel Decks. Designed to withstand the rough usages at sea and port. This is a type of conventional deck coating which combines ease of application with toughness, abrasion resistance and durability. Product Information Colour Selected range Finish Glossy Flash Point Above 30˚C Mixing Ratio Base : Accelerator 1 : 1 Solid Volume 36% approx. Recommended dry film thickness 30 - 35 microns per coat Corresponding wet film thickness 83 - 97 microns per coat Theoretical Spreading Rate 12.0 – 10.3 Sq.metre per litre Coverage with loss factor 20% with loss factor 30% with loss factor 40% 9.6 - 8.2 sq. metre/ltr./coat 8.4 - 7.2 sq. metre/ltr./coat 7.2 - 6.8 sq. metre/ltr./coat Surface Preparation STEEL SURFACES: All surface should be clean, dry, free from oil and grease and primed with Shaliprime Orange/ Yellow/Red. Application Details Drying time Surface dry - 4 hours Hard dry - 8 - 12 hours Method of Application: Brush / Spray / Roller Airless spray recommended for uniform and high film build. Interval before Overcoating 18 hours minimum, No maximum Notes on Airless Spray: Dry Heat Resistance Upto 150˚C (intermittent) Total output fluid pressure 2500 - 3000 psi. (176 - 211 kg/sq. cm.) Storage life 1 Year Thinner: Tip Ranger - 21 - 26 thou. MTH 002 Shalimar Paints Ltd.: 4th Floor, Plot No. 64, Sector-44 Gurgaon -122001, Haryana (India) | P: +91-124-4616600 | F: +91-124-4616659 E: askus@shalimarpaints.com | www.shalimarpaints.com DISCLAIMER: The information in this leaflet is given in good faith. The company will not be liable for loss or damage howsoever caused including liability for negligence, which may be suffered by the user of the data contained therein. It is the user's responsibility to conduct all necessary tests to confirm the suitability of any product or system for their intended use. No guarantee of result is extended since conditions of use are beyond our control. 1